- Front Matter
1
- 10.1002/adma.202109202
From the Ground Up-Materials Science in Singapore.
- Jun 01, 2022
- Advanced Materials
- Xian Jun Loh + 3 more +3
From the Ground Up-Materials Science in Singapore.
Free Access Symbols and Notations Used Animesh Jha, Animesh Jha University of Leeds, Institute for Materials Research, United KingdomSearch for more papers by this author Book Author(s):Animesh Jha, Animesh Jha University of Leeds, Institute for Materials Research, United KingdomSearch for more papers by this author First published: 12 August 2016 https://doi.org/10.1002/9781118696088.oth2 AboutPDFPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShareShare a linkShare onFacebookTwitterLinked InRedditWechat No abstract is available for this article. Inorganic Glasses for Photonics Fundamentals, Engineering, and Applications RelatedInformation
From the Ground Up-Materials Science in Singapore.
From the Ground Up-Materials Science in Singapore.
Resistivity anomalies aboveTc in single crystals of HoBa2Cu3O7−δ superconductors
physica status solidi (a)Volume 139, Issue 1 p. K47-K50 Electronic Transport; Superconductivity Resistivity anomalies above Tc in single crystals of HoBa2Cu3O7−δ superconductors S. Hayashi, S. Hayashi Institute for Materials Research, Tohoku University, Sendai Search for more papers by this authorY. Nishimura, Y. Nishimura Institute for Materials Research, Tohoku University, Sendai Search for more papers by this author S. Hayashi, S. Hayashi Institute for Materials Research, Tohoku University, Sendai Search for more papers by this authorY. Nishimura, Y. Nishimura Institute for Materials Research, Tohoku University, Sendai Search for more papers by this author First published: 16 September 1993 https://doi.org/10.1002/pssa.2211390136 2-1-1 Katahira, Aobaku, Sendai 980, Japan. AboutPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL Share a linkShare onFacebookTwitterLinkedInRedditWechat Volume139, Issue116 September 1993Pages K47-K50 RelatedInformation
Read moreSpecial issue to “ICMAT 2009, Symposium F: nanostructured materials for electrochemical energy systems: lithium batteries, supercapacitors and fuel cells, June 28-July 3, 2009, Singapore”
Encouraged by the successes of the previous four International Conference on Materials for Advanced Technologies (ICMAT) conferences in 2001, 2003, 2005 and 2007, MRS-Singapore in association with National University of Singapore, Nanyang Technological University, Institute of Materials Research and Engineering and many other national and international institutes organised ICMAT 2009 from 28 June to 3 July 2009 at the SUNTEC Singapore International Convention and Exhibition Centre. On 28 June 2009, the conference started with traditional inaugural event followed by a plenary talk by Prof. Peter Gruenberg, a Noble Laureate in Physics. There were more than 2,000 members of the international scientific and materials research community representing over 40 countries that attended 23 Symposia covering many frontier areas in materials science and technology. The overall level of participation in this conference was of an exceptionally high standard as evidenced by the participation of various Nobel Laureates who gave plenary and public lectures, distinguished keynote and invited speakers. The Symposium F on “Nanostructured Materials for Electrochemical Energy Systems: Lithium Batteries, Supercapacitors and Fuel Cells” provided an excellent opportunity for interdisciplinary forum addressing recent trends of science and technology related to materials for electrochemical power sources. It had attracted large participation of up to 150, including 41 invited talks, 60 oral presentations and 50 poster presentations. The talks were classified under three broad categories, which are as follows: electrodes (cathodes and anodes) and electrolytes of lithium batteries, supercapacitors and fuel cells. To manage such large number of presentations, two parallel sessions were scheduled, one dealing with largely lithium batteries and the other addressing fuel cells and supercapacitors. Two best poster awards were given based on the recommendation of jury members. On behalf of the organising committee, we would like to thank all the invited speakers, session chairs and Palani Balaya, San Ping Jiang, Atsuo Yamada, and BVR Chowdari are the Organizing Committee members of Symposium–F, ICMAT 2009.
Read moreSpecial issue to “ICMAT 2011, Symposium N: Advanced materials for energy storage systems—from fundamentals to applications, June 26–July 1, 2011, Singapore”
For the sixth time, MRS-Singapore in association with the National University of Singapore (NUS), Nanyang Technological University, Institute of Materials Research and Engineering and various other national and international institutes organised the biennial International Conference on Materials for Advanced Technologies (ICMAT) from 26 June to 1 July 2011 at the SUNTEC Singapore International Convention and Exhibition Centre. ICMAT 2011 was inaugurated by the Singapore Minister for Trade and Industry, Lim Hng Kiang, the President of NUS Tan Chorh Chuan, and B.V.R. Chowdari, Organizing Chair of ICMAT 2011. The event was attended by more than 3,000 scholars, researchers and practitioners from 67 countries presenting over 3,600 scientific contributions. A wide range of frontier areas in materials science and technology from graphene, topological insulators and various other nanostructures; via metamaterials; experimental and computational tools for materials characterisation to materials solutions for the harvesting, storage and use of renewable energy, as well as biochemistry and biomedical applications were covered in the 40 symposia and 9 plenary talks, of which 4 were given by the Nobel laureates Albert Fert, Ada Yonath, Klaus von Klitzing and Andre Geim. Symposium N on “Advanced Materials for Energy Storage Systems” provided a high-quality interdisciplinary forum addressing recent trends of science and technology related to materials for energy storage and power sources. With the participation of 183 scientists, sharing their
Read moreThe Electron Factor in Catalysis on Metals
This book presents the proceedings of a Workshop on the Electron Factor in Catalysis on Metals held at the National Bureau of Standards, Gaithersburg, Maryland, on December 8-9, 1975. The Workshop was sponsored by the Institute for Materials Research, NBS, the Division of Materials Research of the National Science Foundation, and the Division of Conservation Research and Technology of the Energy Research and Development Administration. The purpose of the Workshop was to review the most recent experimental and theoretical investigations on catalysis on metals and related topics, and to bring together chemists, chemical engineers, surface scientists, and solid state physicists and chemists involved in research related to this topic. These proceedings summarize the four panel sessions into which the Workshop was organized: Experimental Techniques, Effect of Alloying, Geometrical Effects, and Electronic Structure.
Read moreStar-shaped polyhedral oligomeric silsesquioxane-polycaprolactone-polyurethane as biomaterials for tissue engineering application
Polyhedral oligomeric silsesquioxane (POSS) is a unique molecule that is composed of an inorganic silica core with eight organic functional arms, which can be used as a nucleus for covalent bonding to create star-shaped block copolymers with improved mechanical and biological properties. In this work, highly porous star-shaped POSS-polycaprolactone-polyurethane (POSS-PCL-PU) films were synthesized as scaffold biomaterials for tissue engineering. These films have an interesting morphology consisting of rough spherulites with filamentous structures spreading out from their centers; the unique nanotopography was shown to be suitable for cell growth. In vitro degradation was monitored for 52 weeks in terms of the weight loss and morphology changes of the films. The degradation profile exhibited a slow initial weight loss of <1% during the first 24 weeks, followed by a rapid weight loss of ~18% in the following 28 weeks. The films demonstrated excellent biocompatibility and cell-substrate affinity, with a high cell viability of >95% and rapid cell proliferation. The high porosity, unique surface nanotopography and excellent biocompatibility of the star-shaped POSS-PCL-PU film make it a great candidate as a tissue engineering scaffold biomaterial. Researchers in Singapore have prepared highly porous films that are very promising as scaffold biomaterials for tissue engineering. They synthesized the films by using star-shaped polyhedral oligomeric silsesquioxane as the starting inorganic core and incorporating polycaprolactone (PCL) and polyurethane (PU). The researchers, who are from the Institute of Materials Research and Engineering and the National University of Singapore, demonstrate that the inorganic-organic nanocomposite films satisfy all the key criteria for a biodegradable scaffold biomaterial — they have an excellent biocompatibility, a high porosity and a controlled and slow degradability. In addition, the scientists show that the material's unique nanotopography, which is produced by filamentous structures branching out from the centres of rough spherulites, promotes cell growth. The combination of organic and inorganic functionalities makes these films superior to conventional PCL-PU films. Highly porous star-shaped polyhedral oligomeric silsesquioxane (POSS) hybrid films were synthesized using POSS as the starting core followed by polycaprolactone (PCL) extension and polyurethane (PU) cross-linking. The unique three-dimensional nanotopography of these films is conducive for cell growth. The combination of favorable factors such as high porosity, reactive surface topography, excellent biocompatibility and biphasic degradation makes the star-shaped POSS-PCL-PU film a great candidate as a tissue engineering scaffold biomaterial.
Read moreErratum to: Plasma Nitriding Behavior of Fe-C-M (M = Al, Cr, Mn, Si) Ternary Martensitic Steels
YUSAKU TOMIO, formerly Graduate Student with the Graduate School of Engineering, Tohoku University, Sendai 980-8577, Japan, is now Researcher with the Amagasaki Research and Development Center, Nippon Steel & Sumitomo Metal Corporation, Amagasaki 660-0891, Japan. SHIGEKI KITSUYA, formerly with the Graduate School of Engineering, Tohoku University, is now Researcher with the Steel Research Laboratory, JFE Steel Corporation, Kurashiki 712-8511, Japan. KEIICHIRO OH-ISHI, formerly Post Doctoral Research Associate with the National Institute for Materials Science, Tsukuba 305-0047, Japan, is now with the Nagaoka University of Technology, Nagaoka 940-2188, Japan. KAZUHIRO HONO, NIMS Fellow, Director of the Magnetic Materials Unit, with National Institute for Materials Science, Tsukuba 305-0047, Japan. GORO MIYAMOTO, Associate Professor and TADASHI FURUHARA Professor, Deputy Director, are with the Institute for Materials Research, Tohoku University, Sendai 980-8577, Japan. Contact e-mail: furuhara@imr.tohoku.ac.jp The online version of the original article can be found under doi: 10.1007/s11661-013-1991-5. Article published online November 19, 2013
Read moreConstruction and Application of Materials Database for Non-Equilibrium and Metastable Phases
The Institute for Materials Research, Tohoku University (IMR) is a collaborative research institute and open to scientists all over the world. Research subjects of IMR covers most advanced materials of non-equilibrium and/or metastable phases. In order to contribute an original materials database on these research subjects, a comprehensive project was started in 1987. As a result of 11 years of continuous effort, an integrated database system consisting of both literature and numerical factual databases has been constructed and become one of the largest systems in Japanese universities. This paper introduces the details of the management systems, utilization interfaces and contents of the database system, as well as the future IMR database projects.
Read morePresent Status of High Tc Oxide Superconductivity Studies at Tohoku University
The present status of studies of new high Tc oxide superconductors held at Institute for Materials Research, Tohoku University, is described. On single phase orthorhombic YBa2Cu3O6.74 and tetragonal YBa2Cu3O6.05, results of sample preparation, thermal and X ray analyses, high resolution electron microscopy study, and neutron diffraction study are reviewed. The electrical resistivity measurements are done on YBa2Cu3O6.74 and ErBa2Cu3Oz under magnetic fields up to 21.6 Tesla. Hc2(0) of YBa2Cu3O6.74, and ErBa2Cu3Oz are 150 and 200 Tesla, respectively. In addition, the resistance of YBa2Cu3O6.74 begins to appear at 2 Tesla but that of ErBa2Cu3Oz does not appear till 5 Tesla.
Read moreErratum to “Stability of non-degenerate parametric solition in quadratic media” [Opt. Commun. 259 (2006) 286–292
Erratum to “Stability of non-degenerate parametric solition in quadratic media” [Opt. Commun. 259 (2006) 286–292
Pressure sintering mechanisms : W.A. Kaysser, (Institute of Materials Research, Koln, Germany)
Pressure sintering mechanisms : W.A. Kaysser, (Institute of Materials Research, Koln, Germany)
Spectroscopic insight into the mechanism of nickel‐substituted rubredoxin, a bioinspired hydrogenase mimic
Nickel‐substituted rubredoxin (NiRd) has been shown to serve as a functional mimic of nickel‐containing hydrogenases, able to produce hydrogen gas with high catalytic rates. In the native enzyme, the nickel center is coordinated by four cysteine thiolates. A similar environment is seen in NiRd, which represents the first functional model to reproduce this coordination motif. This 52‐residue protein is stable under a wide range of conditions, making it well‐suited for catalytic hydrogen production or in future fuel cells. Although much is known about the structure and function of native rubredoxin and its variants, the catalytic mechanism for hydrogen generation remains unknown. It has been postulated that NiRd may follow a similar mechanism to the well‐studied [NiFe] hydrogenase, with a terminal, rather than a bridging, hydride on the nickel(III) center. Using multiple spectroscopic methods, structures of key catalytic intermediates have been elucidated and compared to those reported for the native [NiFe] hydrogenase. This study of NiRd not only resolves the mechanistic details of an efficient, robust, bioinspired catalyst, but also provides insight into proposed intermediates of the [NiFe] hydrogenase.Support or Funding InformationThe Ohio State University, The Institute for Materials Research, The National Science Foundation
Read more金属材料研究所における小型冷凍機冷却超伝導マグネットの強磁場化 強磁場超伝導材料研究センターと小型冷凍機冷却超伝導マグネット開発
The High Field Laboratory for Superconducting Materials (HFLSM), Institute for Materials Research, Tohoku University has demonstrated the first practical cryocooled superconducting magnets using a GM-cryocooler and high temperature superconducting current leads. For high magnetic field research, various kinds of easy-to-operate cryocooled superconducting magnets such as wide bore, high field, and new functional magnets have been constructed. Recently, the HFLSM succeeded in developing a cryocooled 18.1 T high temperature superconducting magnet and a cryocooled 27.5 T hybrid magnet. This paper reviews cryocooled superconducting magnet technology and relevant new research areas.
Read moreA multipass "low-strain-per-pass" thermomechanical processing for strengthening biomedical Co-Cr-Mo alloys
Event Abstract Back to Event A multipass "low-strain-per-pass" thermomechanical processing for strengthening biomedical Co−Cr−Mo alloys Manami Mori1, Kenta Yamanaka2, Shigeo Sato3 and Akihiko Chiba2 1 National Institute of Technology, Sendai College, Department of Materials and Environmental Engineering, Japan 2 Tohoku University, Institute for Materials Research, Japan 3 Ibaraki University, Graduate School of Science and Engineering/Institute of Applied Beam Science, Japan Introduction: Owing to their excellent wear and corrosion resistance, Co−Cr−Mo alloys have been used in various biomedical devices, such as bearings in artificial hip joints, rods for spinal-instrumentation surgery, bone plates, and screws. Further strengthening of biomedical Co−Cr−Mo alloys is desired, owing to the demand for improvements to their durability in these applications. For this purpose, we focused on dynamic recrystallization (DRX), which occurs during hot deformation at temperatures above ~1273 K, as a grain refining mechanism[1],[2]. Though the DRX-mediated grain refining process can produce exceptionally high-strength Co–Cr–Mo alloys with ultrafine-grained microstructures[3], it is still not viable in the industrial sense. In this paper, we present a concept—multipass “low-strain-per-pass” thermomechanical processing—as a method for obtaining high-strength Ni-free Co−Cr−Mo alloy. The process is carefully designed to enhance the strain accumulation for strengthening. The concept was verified by performing hot rolling of a Co−Cr−Mo alloy and the strengthening mechanisms involved were also examined. Materials and Methods: A Ni-free Co–28Cr–6Mo (mass%) alloy with 0.13 mass% nitrogen was processed by hot rolling at 1473 K with a height reduction of ~1 mm per pass. This process was repeated to realize accumulative height reduction (r) of 30%, 60% and 90%. Microstructures were investigated by scanning electron microscopy (SEM), electron backscatter diffraction (EBSD), and conventional and high-resolution transmission electron microscopy (TEM and HRTEM). Mechanical properties were evaluated by room temperature tensile testing. We analyzed microstructural evolution during the hot rolling process using the convolutional multiple whole profile (CMWP) fitting for X-ray diffraction (XRD) line profiles. Results and Discussion: The EBSD analysis revealed that the grain refinement observed in this work was less significant than that in the DRX-dominated processes and the minimum grain size obtained was 37 μm for r = 90%. This indicates the “less active DRX conditions”. The strength increased monotonically with hot-rolling reduction, eventually reaching 1400 MPa in 0.2% proof stress, which is comparable to that obtained by the DRX-mediated process (Fig. 1). The XRD line-profile analysis for the hot-rolled samples revealed a drastic increase in the dislocation density with an increase in hot-rolling reduction (Fig. 2a) and proposed that the significant strengthening was primarily driven by the increased dislocation density. The CMWP analyses and complementary TEM observations also found that the amounts of stacking faults and resulting deformation twins increased with increasing hot rolling reduction (Fig. 2b). Consequently, extra strengthening, which originates from contributions of these planar defects, became apparent for greater hot-rolling reductions and contributed to the extremely high strength. Figure 1. Tensile properties of hot-rolled Co−Cr−Mo alloy prepared in this study. Figure 2. (a) Dislocation density and (b) stacking fault probability as a function of equivalent strain imposed during hot rolling. Conclusions: The obtained results demonstrated that our strategy is effective to increase the strength of Ni-free Co−Cr−Mo alloys without loss of ductility. The proposed strategy helps in reconsidering the existing strengthening strategy for the alloys, and thus, a novel feasible manufacturing route using conventional hot deformation processing is realized.
Read moreMass production of graphene moves a step closer
Mass production of graphene moves a step closer