This research synthesized a composite ceramic material base CaCO3/Al2O3, CERMET, with possible biomedical applications. Eggshell was used as raw material to obtain CaCO3, and it was reinforced with silver nanoparticles to improve the structural and mechanical properties of the ceramic system. The addition of silver nanoparticles promotes the formation of two phases. The first is a continuous phase called a matrix formed of CaAl2O4 (calcium aluminate). The second is a dispersed phase known as reinforcement made up of silver nanoparticles. The composite ceramics were synthesized using the solid-state synthesis technique from a chemical mixture of CaCO3 and Al2O3 powders in the following chemical ratio: 49.5% CaCO3 + 50.5% Al2O3, with silver nanoparticles added at different percentages (1%, 5%, 10%, 15%). The powder mixture was made in a high-energy mill for homogenization. After that, the mixture was compressed into cylindrical samples for their consolidation by sintering in a high-temperature muffle with a controlled atmosphere, using heating ramps. The sintered samples were characterized by X-ray diffraction, optical microscopy, scanning electron microscopy, and microhardness, including fracture toughness studies. In addition, the Archimedes method determined the sintered samples' density. The results showed a clear relation between the mechanical properties of the CaAl2O4 ceramic base and the incorporated silver nanoparticles since these increased as the percentage of silver nanoparticles increased. In addition, it was observed that the porosity of the samples could be controlled, making the composite material suitable for biomedical applications.