Synthetic Images of Beta-spline Objects

Deep learning has become the main way of the object detection task for autonomous vehicles. Meanwhile, this method typically requires vast amounts of training data to reach their full potential. However, collecting the data from real world and labeling manually is an expensive, time-consuming and error-prone process. Synthetic image has the potential to replace real image for training neural networks, because image creation and labeling annotations are free in this way. For the network trained by synthetic images, the reality gap between real and synthetic images is the main obstacle to use it in the real world. And most previous works are only devoted to generate synthetic images with a good performance on model training, but lack of analysis of the domain gap that affects the performance. This work designs a method of generating the real and synthetic images to analyze and reduce the reality gap between synthetic and real images for car detection. Firstly, this work put one single car with no-background in a random background image to generate real single car and synthetic single car images. In order to further reduce the domain gap in content level, this method keeps the car distribution in synthetic images is similar with the distribution of car in real world. For the purpose of reducing the domain gap in appearance level, the parameters of camera model are same as the camera parameters of image collecting cars and the image is rendered by using the PBRT(Physically Based Ray Tracing) when we generated the synthetic images. Secondly, by training the neural network of instance segmentation with different datasets, the across validation result proves that the reality gap between synthetic and real images is no more than the domain gap between real images. Thirdly, the training results of datasets with different samples diversity show that the diversity of the samples yields better generalization between different datasets for car detection which can effectively reduce the domain gap.

THINGS-data reflects three large-scale neuroimaging and behavioral datasets of object processing in humans, comprising densely sampled functional MRI and magnetoencephalographic recordings, as well as 4.70 million similarity judgments in response to thousands of photographic images for up to 1854 objects.

Chest radiography is one of the most ubiquitous imaging modalities, playing an essential role in screening, diagnosis and disease management. However, chest radiography interpretation is a time-consuming and complex task, requiring the availability of experienced radiologists. As such, automated diagnosis systems for pathology detection have been proposed aiming to reduce the burden on radiologists and reduce variability in image interpretation. While promising results have been obtained, particularly since the advent of deep learning, there are significant limitations in the developed solutions, namely the lack of representative data for less frequent pathologies and the learning of biases from the training data, such as patient position, medical devices and other markers as proxies for certain pathologies. The lack of explainability is also a challenge for the adoption of these solutions in clinical practice.Generative adversarial networks could play a significant role as a solution for these challenges as they allow to artificially create new realistic images. This way, new synthetic chest radiography images could be used to increase the prevalence of less represented pathology classes and decrease model biases as well as improving the explainability of automatic decisions by generating samples that serve as examples or counter-examples to the image being analysed, ensuring patient privacy.In this study, a few-shot generative adversarial network is used to generate synthetic chest radiography images. A minimum Fréchet Inception Distance score of 17.83 was obtained, allowing to generate convincing synthetic images. Perceptual validation was then performed by asking multiple readers to classify a mixed set of synthetic and real images. An average accuracy of 83.5% was obtained but a strong dependency on reader experience level was observed. While synthetic images showed structural irregularities, the overall image sharpness was a major factor in the decision of readers. The synthetic images were then validated using a MobileNet abnormality classifier and it was shown that over 99% of images were classified correctly, indicating that the generated images were correctly interpreted by the classifier. Finally, the use of the synthetic images during training of a YOLOv5 pathology detector showed that the addition of the synthetic images led to an improvement of mean average precision of 0.05 across 14 pathologies.In conclusion, the usage of few-shot generative adversarial networks for chest radiography image generation was shown and tested in multiple scenarios, establishing a baseline for future experiments to increase the applicability of generative models in clinical scenarios of automatic CXR screening and diagnosis tools.

Large annotated datasets are required for training deep learning models, but in medical imaging data sharing is often complicated due to ethics, anonymization and data protection legislation. Generative AI models, such as generative adversarial networks (GANs) and diffusion models, can today produce very realistic synthetic images, and can potentially facilitate data sharing. However, in order to share synthetic medical images it must first be demonstrated that they can be used for training different networks with acceptable performance. Here, we therefore comprehensively evaluate four GANs (progressive GAN, StyleGAN 1–3) and a diffusion model for the task of brain tumor segmentation (using two segmentation networks, U-Net and a Swin transformer). Our results show that segmentation networks trained on synthetic images reach Dice scores that are 80%–90% of Dice scores when training with real images, but that memorization of the training images can be a problem for diffusion models if the original dataset is too small. Our conclusion is that sharing synthetic medical images is a viable option to sharing real images, but that further work is required. The trained generative models and the generated synthetic images are shared on AIDA data hub.

In the past, people usually employ the facial feature extraction and shallow learners such as decision trees, SVM, Naive Bayes, etc. to classify faces of different races. Deep learning usually takes lots of time to train. But with the advances in hardware and new algorithm proposed, the training time problem is gradually alleviated. The deep convolutional neural networks have good effect on images classification. In this paper, we use the deep convolutional neural networks to try to solve the problem of classification faces of different racial origin. Because the convolutional neural networks usually require a huge amount of data for training for good performance, such training set of real racial faces is not available to us. As a result of small set of real racial faces, this study proposes to incorporate synthetic facial images in our training set to sufficiently increase the size of the training set. To the best of our knowledge, this study is the first to propose to incorporate synthetic racial faces to train a deep convolutional neural network to classify real racial faces. We compare the performance of only employ synthetic facial images and mixtures of synthetic and real facial images in the training set. Our experiments show that training with only the real facial images (2,500 images) can achieve 91.25% accuracy in classifying faces of three different race origins. However, the classification when training with a mixture of 2,500 real facial images and 15,000 synthetic facial images can be further improved to 98.5% in accuracy.

Computer vision systems can be used to determine the shapes of real three-dimensional objects for purposes of object recognition and pose estimation or for CAD applications. One method that has been developed is photometric stereo. This method uses several images taken from the same viewpoint, but with different lightings, to determine the three-dimensional shape of an object. Most previous work in photometric stereo has been with gray-tone images; color images have only been used for dielectric materials. In this paper we describe a procedure for color photometric stereo, which recovers the shape of a colored object from two or more color images of the object under white illumination. This method can handle different types of materials, such as composites and metals, and can employ various reflection models such as the Lambertian, dichromatic, and Torrance-Sparrow models. For composite materials, colored metals, and dielectrics, there are two advantages of utilizing color information: at each pixel, there are more constraints on the orientation, and the result is less sensitive to noise. Consequently, the shape can be found more accurately. The method has been tested on both artificial and real images of objects of various materials, and on real images of a multi-colored object.

Reflectance Analysis for 3D Computer Graphics Model Generation

Image synthesis in magnetic resonance (MR) imaging has been an active area of research for more than ten years. MR image synthesis can be used to create images that were not acquired or replace images that are corrupted by artifacts, which can be of great benefit in automatic image analysis. Although synthetic images have been used with success in many applications, it is quite often true that they do not look like real images. In practice, an expert can usually distinguish synthetic images from real ones. Generative adversarial networks (GANs) have significantly improved the realism of synthetic images. However, we argue that further improvements can be made through the introduction of noise in the synthesis process, which better models the actual imaging process. Accordingly, we propose a novel approach that incorporates randomness into the model in order to better approximate the distribution of real MR images. Results show that the proposed method has comparable accuracy with the state-of-the-art approaches as measured by multiple similarity measurements while also being able to control the noise level in synthetic images. To further demonstrate the superiority of this model, we present results from a human observer study on synthetic images, which shows that our results capture the essential features of real MR images.

PurposeTo develop generative adversarial networks (GANs) that synthesize realistic anterior segment optical coherence tomography (AS-OCT) images and evaluate deep learning (DL) models that are trained on real and synthetic datasets for detecting angle closure.MethodsThe GAN architecture was adopted and trained on the dataset with AS-OCT images collected from the Joint Shantou International Eye Center of Shantou University and the Chinese University of Hong Kong, synthesizing open- and closed-angle AS-OCT images. A visual Turing test with two glaucoma specialists was performed to assess the image quality of real and synthetic images. DL models, trained on either real or synthetic datasets, were developed. Using the clinicians’ grading of the AS-OCT images as the reference standard, we compared the diagnostic performance of open-angle vs. closed-angle detection of DL models and the AS-OCT parameter, defined as a trabecular-iris space area 750 µm anterior to the scleral spur (TISA750), in a small independent validation dataset.ResultsThe GAN training included 28,643 AS-OCT anterior chamber angle (ACA) images. The real and synthetic datasets for DL model training have an equal distribution of open- and closed-angle images (all with 10,000 images each). The independent validation dataset included 238 open-angle and 243 closed-angle AS-OCT ACA images. The image quality of real versus synthetic AS-OCT images was similar, as assessed by the two glaucoma specialists, except for the scleral spur visibility. For the independent validation dataset, both DL models achieved higher areas under the curve compared with TISA750. Two DL models had areas under the curve of 0.97 (95% confidence interval, 0.96–0.99) and 0.94 (95% confidence interval, 0.92–0.96).ConclusionsThe GAN synthetic AS-OCT images appeared to be of good quality, according to the glaucoma specialists. The DL models, trained on all-synthetic AS-OCT images, can achieve high diagnostic performance.Translational RelevanceThe GANs can generate realistic AS-OCT images, which can also be used to train DL models.

An unsupervised domain adaptation scheme for single-stage artwork recognition in cultural sites

This study aims to develop a goniometer for capturing images of a real object placed on the goniometer table and regenerating a 3D virtual model of the same object using a series of captured images. The system captures 100 images of the object while the table rotates 360°. By utilizing images taken with a NoIR camera, a 3D virtual model of the real object can be generated. A centralized Raspberry Pi board controls all components of the goniometer. The system includes a control interface that connects to a PC via a Wi-Fi network. Using this interface, the rotation angle of the goniometer table can be adjusted with a minimum step size of 0.9°. The table is connected to a stepper motor, which enables rotation up to 360° with 400 steps per full rotation. As the table rotates, the NoIR camera, connected to the Raspberry Pi, captures images of the object. Additionally, the goniometer includes a rotatable and brightness-adjustable white LED light source. This LED source illuminates the real object on the table and can be controlled via the interface.

A major challenge in applying deep learning to medical imaging is the paucity of annotated data. This study explores the use of synthetic images for data augmentation to address the challenge of limited annotated data in colonoscopy lesion classification. We demonstrate that synthetic colonoscopy images generated by Generative Adversarial Network (GAN) inversion can be used as training data to improve polyp classification performance by deep learning models. We invert pairs of images with the same label to a semantically rich and disentangled latent space and manipulate latent representations to produce new synthetic images. These synthetic images maintain the same label as the input pairs. We perform image modality translation (style transfer) between white light and narrow-band imaging (NBI). We also generate realistic synthetic lesion images by interpolating between original training images to increase the variety of lesion shapes in the training dataset. Our experiments show that GAN inversion can produce multiple colonoscopy data augmentations that improve the downstream polyp classification performance by 2.7% in F1-score and 4.9% in sensitivity over other methods, including state-of-the-art data augmentation. Testing on unseen out-of-domain data also showcased an improvement of 2.9% in F1-score and 2.7% in sensitivity. This approach outperforms other colonoscopy data augmentation techniques and does not require re-training multiple generative models. It also effectively uses information from diverse public datasets, even those not specifically designed for the targeted downstream task, resulting in strong domain generalizability. Project code and model: https://github.com/DurrLab/GAN-Inversion.

We consider the problem of object segmentation in cultural sites. Since collecting and labeling large datasets of real images is challenging, we investigate whether the use of synthetic images can be useful to achieve good segmentation performance on real data. To perform the study, we collected a new dataset comprising both real and synthetic images of 24 artworks in a cultural site. The synthetic images have been automatically generated from the 3D model of the considered cultural site using a tool developed for that purpose. Real and synthetic images have been labeled for the task of semantic segmentation of artworks. We compare three different approaches to perform object segmentation exploiting real and synthetic data. The experimental results point out that the use of synthetic data helps to improve the performances of segmentation algorithms when tested on real images. Satisfactory performance is achieved exploiting semantic segmentation together with image-to-image translation and including a small amount of real data during training. To encourage research on the topic, we publicly release the proposed dataset at the following url: https://iplab.dmi.unict.it/EGO-CH-OBJ-SEG/

Time for Change in Digital Breast Tomosynthesis Research.

Change detection (CD) is becoming indispensable for unmanned aerial vehicles (|UAVs), especially in the domain of water landing, rescue and search. However, even the most advanced models require large amounts of data for model training and testing. Therefore, sufficient labeled images with different imaging conditions are needed. Inspired by computer graphics, we present a cloning method to simulate inland-water scene and collect an auto-labeled simulated dataset. The simulated dataset consists of six challenges to test the effects of dynamic background, weather, and noise on change detection models. Then, we propose an image translation framework that translates simulated images to synthetic images. This framework uses shared parameters (encoder and generator) and 22 × 22 receptive fields (discriminator) to generate realistic synthetic images as model training sets. The experimental results indicate that: 1) different imaging challenges affect the performance of change detection models; 2) compared with simulated images, synthetic images can effectively improve the accuracy of supervised models.