• Home
  • Search
  • Technical Evolution of Ultrafine-grained Cemented Carbides: Mechanisms, Processes, and Limiting Strength
  • https://doi.org/10.2497/jjspm.25-00056Copy DOI Icon

Technical Evolution of Ultrafine-grained Cemented Carbides: Mechanisms, Processes, and Limiting Strength

  • Abstract
  • Literature Map
  • References
  • Similar Papers
Abstract

Ultrafine-grained cemented carbides (WC-Co) are critical materials for high-precision machining tools used in the electronics and automotive industries. This review systematically summarizes their technical evolution, focusing on the elucidation of grain growth inhibition mechanisms and the advancement of manufacturing processes. Historically, the fabrication of alloys with grain sizes below 0.2 µm was hindered by the difficulty of controlling abnormal grain growth during liquid-phase sintering. This barrier was overcome through two key breakthroughs: the development of direct carburization technology that produces uniform nano-sized WC powders, and the theoretical clarification that Vanadium Carbide (VC) inhibits grain growth via atomic adsorption rather than interface segregation. These advances enabled the realization of nano-grained hardmetals (<100 nm) that achieve a superior balance of hardness and fracture toughness. Furthermore, this review discusses emerging technologies, specifically microstructural control via the Zener pinning effect using fine Ti(C,N) particles, which addresses the issue of interface embrittlement associated with conventional inhibitors. Finally, the concept of “limiting strength” is verified through the analysis of the relationship between defect size and transverse rupture strength, suggesting that future high-strengthening strategies must shift from defect elimination to intrinsic matrix strengthening.

Similar Papers
  • Research Article
  • Citations10

Anisotropic grain growth based on the atomic adsorption model in WC-25 pct Co alloy

  • Aug 01, 2000
  • Metallurgical and Materials Transactions A
  • H S Ryoo +3
  • Research Article
  • Citations27

Influence of Cr and W addition on microstructure and mechanical properties of multi-step sintered Mo2FeB2-based cermets

  • Jan 13, 2020
  • Ceramics International
  • Hao Wu +6
  • Research Article
  • Citations7

Effect of Mo2C on the Microstructure and Mechanical Properties of (Ti, W)C–Ni Cermets

  • May 01, 2014
  • Powder Metallurgy and Metal Ceramics
  • Chengliang Han +1
  • PDF
  • Research Article
  • Citations13

Sintering Mechanism, Microstructure Evolution, and Mechanical Properties of Ti-Added Mo2FeB2-Based Cermets.

  • Apr 17, 2020
  • Materials
  • Yupeng Shen +6
  • Research Article
  • Citations41

Effect of molybdenum content on the microstructure and mechanical properties of ultra-fine Ti(C, N) based cermets

  • Mar 20, 2008
  • Materials Characterization
  • Xiaobo Zhang +2
  • Research Article
  • Citations18

Microstructural Development and Properties of New WC-Co Base Hardmetal Prepared From CoxWyCz + C Instead of WC.

  • Jan 01, 2001
  • Journal of the Japan Society of Powder and Powder Metallurgy
  • Kozo Kitamura +2
  • Conference Article
  • Citations2

Development of Ultra Fine Grain Steel for Carburizing

  • Feb 01, 1995
  • SAE technical papers on CD-ROM/SAE technical paper series
  • Yutaka Kurebayashi +1
  • Research Article
  • Citations9

Microstructure and properties of coarse WC-10CoCrFeMnNi cemented carbide by mechanical alloying and hot pressing sintering

  • Sep 16, 2023
  • Materials Today Communications
  • Zhendong Zhao +3
  • Research Article
  • Citations87

Mechanical properties of polycrystalline diamonds

  • Nov 01, 1988
  • Materials Science and Technology
  • A Lammer
  • Research Article
  • Citations8

Infiltration of Al 2O 3/Y 2O 3 mix into SiC ceramic preforms

  • Jan 31, 2007
  • Ceramics International
  • S.P Taguchi +2
  • Research Article
  • Citations2

Study on Fracture Behavior of Alumina Ceramics Toughened by Combining In Situ Growth Abnormal Grains, 3Y-TZP and Cu

  • Nov 01, 2006
  • Key Engineering Materials
  • Shou Fan Rong +2
  • Research Article
  • Citations1

WC/Ni-Si 초경합금의 기계적 성질에 미치는 B4C의 영향

  • Oct 28, 2013
  • Journal of Korean Powder Metallurgy Institute
  • Gil-Geun Lee +1
  • Research Article
  • Citations51

Effects of AGG on fracture toughness of tungsten carbide

  • Nov 03, 2006
  • Materials Science and Engineering: A
  • Tao Li +5
  • Research Article
  • Citations124

Microstructural evolution, mechanical properties and fracture toughness of near β titanium alloy during different solution plus aging heat treatments

  • Jul 15, 2019
  • Journal of Alloys and Compounds
  • Chuan Wu +1
  • Research Article
  • Citations2

Application of Different Dispersants in Fabricating Ti(C,N)-Based Cermet Tool Materials

  • May 01, 2016
  • Key Engineering Materials
  • Qing Zhong Xu +5
Cactus Communications logo

Copyright 2026 Cactus Communications. All rights reserved.