The Coding Technology of Operation and Management Risk Characteristics Based on the In-Depth Learning

Feature extraction in electronic nose (E-nose) signals is the first signal processing step in machine olfactory systems. Traditional feature extraction methods are often cumbersome and depend greatly on the experience of the researcher. The failure of feature extraction seriously deteriorates the performance of subsequent pattern recognition algorithms. In addition, inherent sensor signal shifts among sensing systems with identical configurations affect E-nose performance. Therefore, due to the unfavorable performance of empirical feature extraction and poor reproducibility, the odor detection ability of E-nose systems has deteriorated. In this paper, a bionic olfactory signal processing (BOSP) network based on a spiking neural network (SNN) is proposed to address these issues. Inspired by the structure of the olfactory bulb in mammals, the system has two components: a virtual olfactory receptor (VOR) layer and a bionic olfactory bulb (BOB) layer. The VORs convert the sensor response signals into spike sequences through two spike coding strategies. The BOBs, consisting of mitral cells and granule cells, extract spatiotemporal features from the spike sequences. The proposed BOSP network is a feature-level model that automatically extracts useful features from the sensor array outputs without applying traditional and tedious feature extraction steps, which can subsequently cascade various classifiers. The results of extensive experiments demonstrate that the BOSP network not only shows better feature extraction capability than several state-of-the-art methods but also exhibits promising shift suppression ability.

Cardiovascular diseases represent a leading cause of mortality worldwide, necessitating accurate and early diagnosis for improved patient outcomes. Current diagnostic approaches for cardiac abnormalities often present challenges in clinical settings due to their complexity, cost, or limited accessibility. This study develops two deep learning architectures that offer fast, accurate, and cost-effective methods for automatic diagnosis of cardiac diseases, focusing specifically on addressing the critical challenge of limited labeled datasets in medical contexts. We propose two methodologies: first, a Multi-Branch Deep Convolutional Neural Network (MBDCN) that emulates human auditory processing by utilizing diverse convolutional filter sizes and power spectrum input for enhanced feature extraction; second, a Long Short-Term Memory-Convolutional Neural (LSCN) model that integrates LSTM blocks with MBDCN to improve time-domain feature extraction. The synergistic integration of multiple parallel convolutional branches with LSTM units enables superior performance in heart sound analysis. Experimental validation demonstrates that LSCN achieves multiclass classification accuracy of 89.65% and binary classification accuracy of 93.93%, significantly outperforming state-of-the-art techniques and traditional feature extraction methods such as Mel Frequency Cepstral Coefficients (MFCC) and wavelet transforms. A comprehensive fivefold cross-validation confirms robustness of our approach across varying data partitions. These findings establish the efficacy of our proposed architectures for automated heart sound analysis, offering clinically viable and computationally efficient solutions for early detection of cardiovascular diseases in diverse healthcare environments.

Electroencephalogram (EEG) signals are an essential tool for the detection of epilepsy. Because of the complex time series and frequency features of EEG signals, traditional feature extraction methods have difficulty meeting the requirements of recognition performance. The tunable Q-factor wavelet transform (TQWT), which is a constant-Q transform that is easily invertible and modestly oversampled, has been successfully used for feature extraction of EEG signals. Because the constant-Q is set in advance and cannot be optimized, further applications of the TQWT are restricted. To solve this problem, the revised tunable Q-factor wavelet transform (RTQWT) is proposed in this paper. RTQWT is based on the weighted normalized entropy and overcomes the problems of a nontunable Q-factor and the lack of an optimized tunable criterion. In contrast to the continuous wavelet transform and the raw tunable Q-factor wavelet transform, the wavelet transform corresponding to the revised Q-factor, i.e., RTQWT, is sufficiently better adapted to the nonstationary nature of EEG signals. Therefore, the precise and specific characteristic subspaces obtained can improve the classification accuracy of EEG signals. The classification of the extracted features was performed using the decision tree, linear discriminant, naive Bayes, SVM and KNN classifiers. The performance of the new approach was tested by evaluating the accuracies of five time-frequency distributions: FT, EMD, DWT, CWT and TQWT. The experiments showed that the RTQWT proposed in this paper can be used to extract detailed features more effectively and improve the classification accuracy of EEG signals.

The edge feature extraction of image is one of the research fields of image processing theory and application. The traditional methods of image feature extraction are simple and proficient, but the accurate performance of the feature extracted is not even higher. As such, a new method for extracting image edge feature was proposed by using the two-dimensional Empirical Mode Decomposition (2-D EMD) and Riesz Transform. Firstly, the image was decomposed to multi-level Intrinsic) Mode Function (IMF) by 2-D EMD, and then the Riesz Transform with stronger local preserving ability was used for analyzing their local properties instead of the Hilbert Transform, by which the edge feature extraction with higher resolution was carried on. Finally, simulation shows that the proposed method is feasible and valid.

Research on feature extraction algorithm of rolling bearing fatigue evolution stage based on acoustic emission

Point cloud boundary is an important part of the surface model. The traditional feature extraction method has slow speed and low efficiency and only achieves the boundary feature points. Hence, the point cloud feature regularization is proposed to obtain the boundary lines based on the fast extraction of feature points in this article. First, an improved k-d tree method is used to search the k neighbors of sampling point. Then, the sampling point and its k neighbors are used as the reference points set to fit a microcut plane and project to the plane. The local coordinate system is established on the microcut plane to convert 3-D into 2-D. The boundary feature points are identified by judging criterion of field force and then are sorted and connected according to the vector deflected angle and distance. Finally, the boundary lines are smoothed by the improved cubic B-spline fitting method. Experiments show that the proposed method can extract the boundary feature points quickly and efficiently, and the mean error of boundary lines is 0.0674 mm and the standard deviation is 0.0346 mm, which has high precision. This proposed method was also successfully applied to feature extraction and boundary fitting of Xinyi teaching building of the Wuhan University of Technology.

Detection of fabric defects with intertwined frame vector feature extraction

Application of Shearlet transform to classification of surface defects for metals

The traditional matrix-based feature extraction methods that have been widely used in face recognition essentially work on the facial image matrixes only in one or two directions. For example, 2DPCA can be seen as the row-based PCA and only reflects the information in each row, and some structure information cannot be uncovered by it. In this paper, we propose the directional 2DPCA that can extract features from the matrixes in any direction. To effectively use all the features extracted by the D2DPCA, we combine a bank of D2DPCA performed in different directions to develop a matching score level fusion method named multi-directional 2DPCA for face recognition. The results of experiments on AR and FERET datasets show that the proposed method can obtain a higher accuracy than the previous matrix-based feature extraction methods.

Due to the lack of expert experience and the shortcomings of high blindness, the traditional partial discharge feature extraction method of gas insulated switchgear (GIS) has an impact on the accuracy of pattern recognition; convolutional neural network emerged in recent years has the ability to adaptively extract features, but training a network with better performance needs to increase the network depth on the one hand, and more supportive data on the other. Therefore, this paper propose a GIS partial discharge pattern recognition method based on transfer learning of three pre-trained network models (VGG, InceptionV3, and Resnet50) under the small data set. And the feature extracted by the network are applied to SVM classifier which performs well on a small data set. Realizing the combination of deep learning and traditional machine learning. Experimental result shows that this method can effectively improve the accuracy of GIS partial discharge pattern recognition.

The increasing global population has escalated the demand for fish products. This calls for a stable supply which can only be met through improved aquaculture practices. The automatic recognition of fish diseases from diseased underwater images is one of such practices that aims to control disease, improve fish production and optimize profits. However, due to lack of public fish disease dataset, there has been limited research towards fish disease recognition. Moreover, due to low quality of underwater images and complex underwater environments, traditional hand-designed feature extraction methods or convolutional neural networks (CNNs)-based classifiers cannot adequately recognize fish diseases in real underwater scenes. Therefore, this paper proposes a novel hybrid approach based on multilayer fusion, attention mechanism and online sequential extreme learning machine (OSELM) to recognize fish diseases in aquaculture. We further compare the classification performance of the proposed model with baseline, attention-based, ConvNeXt and Swin transformer models. Feature extraction is enhanced by integrating same level features and focusing on salient features for fish disease recognition. The characteristic information of fish disease is refined by using strongly discriminative features of the infected fish regions and weakening regions of low interest using convolutional block attention module (CBAM). The module is added to the multilayer fusion network to sequentially infer attention maps along the channel and spatial dimensions for every intermediate feature map. Fish disease recognition is then done using OSELM for faster learning and improved classification performance. The models are trained, validated and tested on a custom dataset with image samples collected from various internet sources. The proposed method achieves 94.28% of accuracy, precision of 92.67%, recall of 92.17% and 92.42% of F1- score on dataset with background elimination. The proposed method can be used for fish disease identification in complex underwater environments in aquaculture.

Shock signal features must be extracted for use in pattern recognition or fault diagnosis. In this work, we proposed a method for the feature extraction of shock signals, which are vibration signals that change faster and have larger amplitude ranges than general signals. First, we proposed the concepts of amplitude density for monotonic functions and piecewise monotonic functions. On the basis of these concepts, we then proposed the concept of the upper limit of density integral (ULDI), which was adopted to obtain signal features. Then, we introduced two types of serious fault cracks to the latch sheet of an automatic gun mechanism that is used on warships. Next, we applied the proposed method to extract the features of shock signals from data acquired when the automatic gun mechanism fired with normal and two fault patterns. Finally, we verified the effectiveness of our proposed method by applying the features that it extracted to a support vector machine (SVM). Our proposed method provided good results and was superior to the traditional statistics-based feature extraction method when applied to a SVM for classification. In addition, the former method demonstrated better generalisation than the latter. Thus, our method is an efficient approach for extracting shock signal features in pattern recognition and fault diagnosis.

Traditional multi-view feature extraction methods based on manifold learning frequently overlook the similarity sequence between samples, failing to capture the intrinsic manifold structure of raw nonlinear samples and restricting the recognition performance of multi-view learning. In this paper, we propose a novel similarity-sequenced multi-view discriminant feature extraction method, called Similarity -sequenced Multi-view Discriminant Correlation Analysis (SMDCA), which explicitly considers the sample sequences based on similarity. The method constructs similarity-sequenced discriminant scatters for preserving the sequence structure of within-class samples and develops between-class correlations with the similarity-sequence structure information for further constraining intrinsic manifold structure of cross-view samples. SMDCA can also simultaneously extract low-dimensional sequence features with well-discriminative power from multiple views. Extensive experiments exhibit that SMDCA can provide higher recognition accuracy and stronger robustness in image recognition tasks.

Point cloud completion aims to reconstruct the complete 3D shape from incomplete point clouds, and it is crucial for tasks such as 3D object detection and segmentation. Despite the continuous advances in point cloud analysis techniques, feature extraction methods are still confronted with apparent limitations. The sparse sampling of point clouds, used as inputs in most methods, often results in a certain loss of global structure information. Meanwhile, traditional local feature extraction methods usually struggle to capture the intricate geometric details. To overcome these drawbacks, we introduce PointCFormer, a transformer framework optimized for robust global retention and precise local detail capture in point cloud completion. This framework embraces several key advantages. First, we propose a relation-based local feature extraction method to perceive local delicate geometry characteristics. This approach establishes a fine-grained relationship metric between the target point and its k-nearest neighbors, quantifying each neighboring point's contribution to the target point's local features. Secondly, we introduce a progressive feature extractor that integrates our local feature perception method with self-attention. Starting with a denser sampling of points as input, it iteratively queries long-distance global dependencies and local neighborhood relationships. This extractor maintains enhanced global structure and refined local details, without generating substantial computational overhead. Additionally, we develop a correction module after generating point proxies in the latent space to reintroduce denser information from the input points, enhancing the representation capability of the point proxies. PointCFormer demonstrates state-of-the-art performance on several widely used benchmarks.

We propose an efficient feature extraction architecture based on PCANet. Our method performs far better than many traditional artificial feature extraction methods with the help of standalone filter learning and multiscale local feature combination. Such structure cascaded by both linear layers with convolution filters and non-linear layers in binarization process shows better adaptability in different databases. With the help of parallel computing, training time is much shorter than PCANet and also more fixed compared to convolutional neural network. Experiment in LFW and FERET shows that such a data oriented structure shows good performance both on stability and accuracy in various environments.