The differences of COTS-based project stakeholders

To improve the navigation accuracy of AUV (autonomous underwater vehicle), SINS (strapdown inertial navigation system), GPS (global positioning system), DVL (Doppler velocity log) and TAN (terrain aided navigation) are adopted in the AUV integrated navigation system. The mathematic model of the AUV integrated navigation system and the observation model of the chosen navigation sensors are built according to the system simulation experiments data. An improved filter based on RBF neural network for adjusting the information sharing factors is designed and implemented in the AUV integrated navigation system. Simulation experiments are carried out according to the mathematic model. It can be concluded from the simulation experiments that the navigation accuracy is improved substantially with the multiple sensors and federated filter in case that colored noise is engaged. The novel integrated navigation system is effective in prohibiting the divergence of the filter and improving fault tolerance ability and it greatly raises the precision of the navigation accuracy for the AUV integrated navigation system.

The UK Natural Environment Research Council (NERC) is developing an autonomous underwater vehicle (AUV) capable of measuring, storing and transmitting full-depth oceanographic data over basin-wide tracks. An important feature of this AUV (known as Autosub) is that it will surface periodically for short periods in order to communicate with its base and to determine its position. The satellite-based global positioning system (GPS) has been chosen as the prime candidate for this latter requirement. However, GPS suffers from a number of significant disadvantages in the wet environment of an AUV. The one discussed is the difficulty of acquiring fresh satellite orbital parameters (the ephemeris) in the presence of periodic wave wash-over of the GPS antenna. A collaborative programme involving members of the Autosub team based at the NERC Dunstaffnage Marine Laboratory (DML) and GPS specialists at Navstar Systems Ltd is addressing this problem in two stages. Firstly, the dynamics of the AUV and the consequent antenna masking and interaction with the GPS carrier and code tracking loops have been simulated, leading to the development and validation of a new algorithm for reconstruction of the satellite message. A later stage, not discussed in detail in the present paper, will embed the algorithm in the firmware of a production GPS receiver and test it under practical conditions of signal disruption. The results of the simulation stage are discussed. Some initial work on the development of a simple GPS antenna capable of withstanding immersion to full ocean depth is also presented.

In this chapter, the receding horizon Kalman filter is applied to underwater navigation systems. The ocean covers about two-thirds of the earth and has a great effect on human beings. However, the ocean is overlooked while we focus our attention on land and atmospheric issues; we have not been able to explore the full depths of the ocean, its abundant livings and non-living resources. For example, only recently we have discovered, by using manned submersibles, that a large amount of methane and carbon dioxide comes from the seafloor and extraordinary groups of organisms live in hydrothermal vent areas. However, a number of complex issues due to the unstructured and hazardous undersea environment make it difficult to survey in the ocean even though today’s technologies have allowed humans to land on the moon and robots to travel to Mars. Unmanned underwater vehicles (UUVs) can help us better understand marine and other environmental issues, protect the ocean resources of the earth from pollution, and efficiently utilize them for human welfare. The UUV is a platform for a variety of sensors: acoustic, magnetic, gravimetric and chemical ones. Most commercial UUVs are tethered and remotely operated, referred to as remotely operated vehicles (ROVs). Extensive use of manned submersibles and ROVs are currently limited to a few applications because of very high operational costs, operator fatigue and safety issues. The demand for advanced underwater vehicle technologies is growing and will eventually lead to fully autonomous and reliable underwater vehicles. Autonomous underwater vehicles (AUVs) were initially developed to perform missions that were not easy for ROVs and manned underwater vehicles. Since the autonomy allows AUVs to be used for risky missions such as a mine countermeasure (MCM) or under-ice operations, AUVs are replacing ROVs towed vehicles as well as manned underwater vehicles (Whitcomb, 2000). For detailed ocean surveys, an AUV acts as a more stable platform for precision sensors than ROVs or towed vehicles because an AUV is not subject to physical disturbances transmitted along the cable to the surface vessel. This absence of physical attachment also allows AUVs to measure ocean characteristics at specific depths and perform bottom-following missions as owing to its autonomy. In short, An AUV provides marine researchers with a new form of access to deeper ocean. For an AUV to successfully complete a typical survey mission, it must follow a path specified by the operator as closely as possible and arrive at a precise location for collecting data. When an AUV is not able to follow the path accurately during the mission, critical Source: Kalman Filter, Book edited by: Vedran Kordic, ISBN 978-953-307-094-0, pp. 390, May 2010, INTECH, Croatia, downloaded from SCIYO.COM

Many possible autonomous underwater vehicle (AUV) missions require a high degree of navigational accuracy. The Global Positioning System (GPS) is capable of providing this accuracy. However, intermittent reception caused by either wave action or deliberate submergence will cause the loss of GPS position fix information for periods extending from several seconds to minutes. The SANS system is designed to demonstrate the feasibility of using a low-cost strapped-down inertial measurement unit to navigate between GPS fixes. It is anticipated that navigational accuracy comparable to GPS is possible between fixes.

A Fuzzy Kalman Filter Optimized Using a Genetic Algorithm for Accurate Navigation of an Autonomous Underwater Vehicle

The absence of global positioning system (GPS) signals and the influence of ocean currents are two of the main challenges facing the autonomy of autonomous underwater vehicles (AUVs). This paper proposes an acoustic localization-based tracking control method for AUVs. Particularly, three buoys that emit acoustic signals periodically are deployed over the surface. Times of arrivals of these acoustic signals at the AUV are then obtained and used to calculate an estimated position of the AUV. Moreover, the uncertainties involved in the localization and ocean currents are handled together in the framework of the extended Kalman filter. To deal with system physical constraints, model predictive control relying on online repetitive optimizations is applied in the tracking controller design. Furthermore, due to the different sampling times between localization and control, the dead-reckoning technique is utilized considering detailed AUV dynamics. To avoid using the highly nonlinear and complicated AUV dynamics in the online optimizations, successive linearizations are employed to achieve a trade-off between computational complexity and control performance. Simulation results show that the proposed algorithms are effective and can achieve the AUV tracking control goals.

As the exploration of marine resources continues to deepen, the utilization of Autonomous Underwater Vehicles (AUVs) for conducting marine resource surveys and underwater environmental mapping has become a common practice. In order to successfully accomplish exploration missions, AUVs require high-precision underwater navigation information as support. A Strapdown Inertial Navigation System (SINS) can provide AUVs with accurate attitude and heading information, while a Doppler Velocity Log (DVL) is capable of measuring the velocity vector of the AUVs. Therefore, the integrated SINS/DVL navigation system can furnish the necessary navigational information required by an AUV. In response to the issue of DVL being susceptible to external environmental interference, leading to reduced measurement accuracy, this paper proposes an end-to-end deep-learning approach to enhance the accuracy of DVL velocity vector measurements. The utilization of the raw measurement data from an Inertial Measurement Unit (IMU), which includes gyroscopes and accelerometers, to assist the DVL in velocity vector estimation and to refine it towards the Global Positioning System (GPS) velocity vector, compensates for the external environmental interference affecting the DVL, therefore enhancing the navigation accuracy. To evaluate the proposed method, we conducted lake experiments using SINS and DVL equipment, from which the collected data were organized into a dataset for training and assessing the model. The research results show that the DVL vector predicted by our model can achieve a maximum improvement of 69.26% in terms of root mean square error and a maximum improvement of 78.62% in terms of relative trajectory error.

In recent years, precious observations by autonomous underwater vehicle (AUV) have been performed. Tracking and navigation of AUV are important for precious observations. In Japan agency for Marine-earth Science and Technology (JAMSTEC) the observations with AUV ldquoURASHIMArdquo have been implemented in deep ocean area. AUV URASHIMA is navigated by an inertial navigation system (INS) mainly. The absolute position of AUV is tracked on the support vessel with super short base-line (SSBL) method of acoustic positioning. And sometime the own position in AUV is updated by the SSBL estimation result to correct the drift error of INS. However the SSBL is not so accurate. So the position correction includes the SSBL error and the position correction is performed drastically. In this paper, a method for accurate tracking of AUV and rapid correction of the INS status is proposed. The tracking is mainly achieved by SSBL on the support vessel. Additionally the INS data is transmitted from AUV including the acoustic positioning signal. The INS output of relative position to past own position is very accurate within short time. The INS data is used for tracking. Furthermore the position result estimated on the vessel is transmitted to AUV with next interrogation signal. And the own position in AUV is rapidly updated with accurate estimation. Some digital data including INS data is modulated with phase shift keying (PSK) method and direct sequence spread spectrum (DSSS) technique for transmission with acoustic positioning signal. The proposed method was considered by simulation. And good results were obtained.

How to achieve continuous, reliable and accurate positioning performance using low-cost sensors is one of the main challenges for aviation navigation system. Global Positioning System (GPS) can provide the primary means of navigation in a number of aviation navigation applications (e.g., manned and unmanned aircraft vehicle, airport ground vehicle). However, GPS signal deteriorations typically occur due to aircraft itself during maneuvering, ionospheric scintillation, Doppler shift, multipath and so on. Thus, there is a need to research GPS augmentation strategies which can be used in the Communication, Navigation, Surveillance/Air Traffic Management. GPS integration with Inertial Navigation system (INS) is one of the key strategies. But once GPS signal outages, the integrated navigation system works in pure INS, and positioning accuracy deteriorates with time. When using low cost GPS/INS integration, a primary problem is the rapid performance deteriorate during GPS outages. To provide continuous, accurate and reliable positioning information in aviation, discrete grey prediction model (DGPM) aided fusion methodology is proposed. The DGPM provides pseudo-GPS position information for INS during GPS outages. The mathematical model of integrated navigation system is established, including INS error equations, Kalman filter and DGPM. The model works in the update mode when there is no GPS failure, whereas it switches to the prediction mode in case of GPS outages. To verify the feasibility and effectiveness of the proposed methodology, real road test is performed. The comparison results show that accuracy of longitude and latitude are improved by more than 80% and 70%, respectively. The DGPM can effectively provide position corrections for standalone INS during GPS outages.

Autonomous underwater vehicle (AUV) navigation and localization in underwater environments is particularly challenging due to the rapid attenuation of Global Positioning System (GPS) and radio-frequency signals. Underwater communications are low bandwidth and unreliable, and there is no access to a global positioning system. Past approaches to solve the AUV localization problem have employed expensive inertial sensors, used installed beacons in the region of interest, or required periodic surfacing of the AUV. While these methods are useful, their performance is fundamentally limited. Advances in underwater communications and the application of simultaneous localization and mapping (SLAM) technology to the underwater realm have yielded new possibilities in the field. This paper presents a review of the state of the art of AUV navigation and localization, as well as a description of some of the more commonly used methods. In addition, we highlight areas of future research potential.

Underwater navigation methodology based on intelligent velocity model for standard AUV

Research on position correction method for AUV large depth navigation based on ranging positioning

Land vehicle positioning relies mostly on satellite navigation systems such as the Global Positioning System (GPS). However, GPS signals may be degraded or suffer from blockage in urban canyons and tunnels, and the positioning information provided is interrupted. One solution for such a problem is to integrate GPS with an inertial measurement unit (IMU) and the navigation solution is achieved using an estimation technique which is traditionally based on a Kalman filter (KF). In order to have a low cost navigation solution for land vehicles, MEMS-based inertial sensors are used. To further reduce the cost a reduced inertial sensor system (RISS) which consists of only one gyroscope and a speed sensor is integrated with GPS. The position and velocity errors can be estimated by a KF relying on RISS dynamic error model and GPS position and velocity updates. However, low-cost MEMS sensors suffer from complex error characteristics, which are difficult to model by the linearized KF models. The positional accuracy of the integrated system can be improved using Parallel Cascade Identification (PCI) that is cascaded with the KF. The proposed augmented KF-PCI method can handle both linear and nonlinear system errors as the linear parts of the errors are modeled inside the KF and the nonlinear residual RISS errors are modeled by PCI. The performance of this method is examined by road test trajectories in a land vehicle and compared to KF.

Integration of Global Positioning System (GPS) and Inertial Navigation System (INS) are very practical method to get high precision navigation. GPS/INS data Fusion in navigation has been a research topic for decades. Usually the update time of GPS an INS is different. The update time of GPS is 20HZ, and the time of INS is 100HZ or higher. Since GPS and INS are mainly methods in navigation system. Techniques of fusing GPS and INS data are in high demand in navigation industry. Usually the Karman filter is used to fuse the data from GPS and INS. But the Kalman filter is model-dependent and a priori the model parameters need to be known. In this work, a generic and intelligent approach of GPS and INS data fuse using fuzzy interpolation before Kalman algorithm is proposed. First a simplified interpolation model is introduced in a ordinary GPS and INS data fusion. Second a fuzzy rule-based system is established to fuzzy interpolation with objective fuzzy method. Then the parameters of objective fuzzy system are identified, the best n-rule is determinate and the optimal rule base system is found. Finally this approach is applied on an example for a car GPS and INS data fusion, and the results are calculated with computer system to demonstrate the advantages of this approach.

With the development of the intelligent vehicle navigation systems and vehicle networking systems, vehicle positioning and state estimation become very important. This paper investigates the integration of Global Positioning System (GPS), Inertial Navigation System (INS) and Dead Reckoning based on Anti-lock Braking System (ABSDR) positioning based on Kalman filter, and aims at achieving full-time vehicle positioning. In this paper, we use Kalman Filter to estimate INS positioning error based on GPS or ABSDR solution, take the INS solution compensated with estimated error as system output. This paper introduces INS positioning algorithm, dead reckoning method based on the ABS wheel speed and Kalman filtering method. After that, simulation analysis and experimental verification of the positioning algorithm are carried out. The results show that the system output high-precision high-frequency positioning information when GPS is available, and when GPS is unavailable, INS positioning errors can be compensated well with ABSDR introduced, achieving the full-time positioning of the vehicle.