The gods must be crazy

One difference between real-time CSCW systems and traditional distributed systems is that the former one needs to provide a natural, free and fast interface for multi-user interaction. However, typical multi-user interaction methods in 3D CAD systems apply strict consistency maintenance, such as lock mechanism and floor control which result in a stagnant and unnatural interface. This article proposes a semantic-based operational transformation (OT), which is similar to the traditional OT form, to support less constraint multi-user interaction and to achieve consistency in collaborative CAD editing (co-CAD) systems. Major technical contributions of this article include: a 3D semantic priority to select operations from waiting list, an OT strategy to decide OT direction, OT rules and a kernel OT function for co-CAD systems.

The team design becomes increasingly important to future manufacturing industry. This paper focus on the key issues of collaborative 3D design system through Internet or Intranet in CSCW(Computer Support for Cooperative Work). In the paper, we propose our solutions of concurrency control tactics, collaboration aware, multi-mode communications network management, synchronous real-time protection in a collaborative 3D design system. Based on open source projects-open CASCADE and Adaptive Communication Environment (ACE), we implement our collaborative 3D design system, and experiments show our system can meet the requirements of some 3D cooperative modeling design applications.

Multi-LLM collaborative systems have attracted significant attention as a promising solution for complex tasks, enabling multiple large language models (LLMs) with different domains to work together toward a common goal. Different collaborative structures (e.g., Centralized, Horizontal, and Joint Interaction) and communication methods (e.g., direct, summary, and vote) give the system with enhanced flexibility and reasoning capability. However, these same mechanisms also introduce potential security and privacy risks, such as the generation of incorrect responses and the leakage of sensitive information. Based on the above unique characteristics of collaborative systems, we propose three attack methods (named Decision Poisoning Attack, Indirect Echoleak Attack and Information Collision Attack) that exploit the interactions between LLMs to achieve different objectives like system manipulation and privacy leakage. Extensive experiments demonstrate the effectiveness of the proposed attack on three structures and three communication methods, highlighting the security vulnerabilities and potential risks in Multi-LLM collaborative systems. We further discuss possible defense methods that can mitigate the attack performance. Our work show that (1) the key factor for a successful attack on collaborative systems is ensuring the malicious instruction persists and propagates throughout the inter-LLMs communication. (2) both the system architecture and the communication method can affect attack effectiveness, offering valuable insights for the design of more secure Multi LLM collaborative systems in the future.

The recent advances in networking have determined an increasing use of information technology to support distributed cooperative applications. Several novel applications have emerged in this area, like computer supported collaborative work (CSCW), large scale distributed virtual worlds, collaborative recommender systems, collaborative learning systems. The definition of these applications requires to afford several challenges, like the definition of user interfaces, of coordination protocols, and of proper middle-ware and architectures supporting distributed cooperation. Collaborative applications may greatly benefits also from the support of P2P and cloud architectures. As a matter of fact, with the emergence of readily available P2P and cloud platforms, collaborative applications developers have the opportunity of deploying their collaborative application by exploiting a hybrid P2P/Cloud architectures with a support dynamically adapting . This brings possibilities to smaller developers that were reserved for the big companies until recently. The integration of mobile/Cloud platforms for Collaborative Applications is another challenge for the widespread of these applications.

This paper gives an overview of a collaborative design system (CDS) for electromechanical products. To reduce design costs and to manufacture high-quality products, it is well known that concurrent engineering (CE) is a very efficient approach. Three-dimensional (3D) CAD system and engineering database system are essential components of CE. The CDS is an environment to realize CE. By creating 3D models in a computer and performing some simulations such as mechanical, electronic, software simulation and integrated simulations, it is possible to estimate functions, assemblability, manufacturability and so on, before making prototype models. In this paper, we outline the CDS and mainly discuss the total information management system (TIMS) which makes an important role of the CDS. This paper describes the implementation experience of some functions of the TIMS.

Decision support systems have always had a goal of supporting decision-makers. Over time, DSS have taken many forms, or many forms of computer-based support have been considered in the context of DSS, depending on one’s particular perspective. Regardless, there have been decision support systems (DSS), expert systems, executive information systems, group DSS (GDSS), group support systems (GSS), collaborative systems (or computer-supported collaborative work (CSCW) environments), knowledge-based systems, and inquiring systems, all of which are described elsewhere in this encyclopedia. The progression of decision support system types that have emerged follows to some degree the increasing complexity of the problems being addressed. Some of the early DSS involved single decision-makers utilizing spreadsheet models to solve problems. Such an approach would be inadequate in addressing complex problems because one aspect of problem complexity is that multiple stakeholders typically exist. Baldwin (1993) examined the need for supporting multiple views and provides the only attempt found in the information systems literature to operationalize the concept of a perspective. In his work, a view is defined as a set of beliefs that partially describe a general subject of discourse. He identified three major components of a view: the belief or notion to convey, a language to represent the notion, and a subject of discourse. He further described notions as comprising aspects and a vantage point. Aspects are the characteristics or attributes of a subject or situation that a particular notion emphasizes. A vantage point is described by the level of detail (i.e., overview or detailed analysis). Assuming the subject of discourse can be identified with the notion, Baldwin described how differences in views may occur via differences in the notion, the language, or both.

After analyzing the requirement of large-scale equipment installation, both the functions and the faults of asynchronous collaborative design system and synchronous collaborative design system were discussed. And then, a combined collaborative design platform, which combined the product data management system with the synchronous collaborative design system, was proposed. A framework for the combined collaborative design platform was put forward. The product data management system and the synchronous collaborative design system were discussed in detail. And then, the strategies for sharing and exchanging of product data and information were presented. Operation steps of the combined collaborative platform were described in detail. Finally presented was a case study that using the combined collaborative design platform in electric dust collector installation.

A collaborative filtering system recommends to users products that similar users like. Collaborative filtering systems influence purchase decisions, and hence have become targets of manipulation by unscrupulous vendors. We provide theoretical and empirical results demonstrating that while common nearest neighbor algorithms, which are widely used in commercial systems, can be highly susceptible to manipulation, a class of collaborative filtering algorithms which we refer to as linear is relatively robust. These results provide guidance for the design of future collaborative filtering systems.

Security solution frames and security patterns for authorization in distributed, collaborative systems

This paper describes an approach for designing software agents to support collaborative business systems. It proposes that agent-supported collaborative systems can be economically built using reusable agents. The paper defines a way to identify such generic agents and integrate them into development methodologies. Such reusable agents must be based on concepts that can apply to a wide range of collaborative systems. To do this, the paper defines a collaborative metamodel to describe collaborative work and identifies generic agents based on the metamodel concepts. The paper then describes a methodology that defines systems as object models in terms of the metamodel concepts. It then supports each object with the corresponding agent.

This paper discusses how a group leader computer tutor may aid students in learning collaborative skills in a co-operative learning environment. However, students need to learn collaborative skills and practice using them. The group leader computer tutor discussed in this paper is designed on the principles of co-operative learning, intelligent tutoring systems and computer-supported collaborative work within an intelligent collaborative learning system (ICLS). The group leader aims to facilitate group work on the task level and to teach students how to use collaborative skills in the discussion level as students work on networked computers in the Jigsaw method of co-operative learning. The ICLS and its group leader were used by two classes at a liberal arts university. Qualitative research shows that the students' co-operative attitudes changed and academic achievement improved from pre- to post-treatment. Students, especially, used the communication skill of openness in comment type discussions. The students enjoyed working collaboratively through the ICLS and their teachers thought that the experience was valuable for them.

Virtual Reality (VR) appears a natural medium for three-dimensional computer supported collaborative work (CSCW). However the current trend in CSCW is to adapt the computer interface to work with the user's traditional tools, rather than separating the user from the real world as does immersive VR. One solution is through Augmented Reality, the overlaying of virtual objects on the real world. In this paper we describe the Shared Space concept--the application of Augmented Reality for three-dimensional CSCW. This combines the advantages of Virtual Reality with current CSCW approaches. We describe a collaborative experiment based on this concept and present preliminary results which show that this approach may be better for some applications.

The intention of this research is to propose a uniform architecture for control software design of collaborative manufacturing systems. It introduces software components known as Modular, Intelligent, and Real-time Agents (MIRAs) that represent both products (C-MIRA) and mechatronic components (O-MIRAs) in a production system. C-MIRAs are in constant interaction with customers and operators through human machine interfaces (HMIs), and are responsible for transforming products from concepts up to full realization of them. It is demonstrated that desired services of a number of machines and mechatronic components can be dynamically allocated to a C-MIRA using a fully decentralized scheduling and operation control. This architecture also envisages the machines’ control to be composed of a set of modular software components, with standardized interfaces. This makes them intuitive and easy to install, to create the desired behavior for collaborative manufacturing systems. A simplified food production case study, whose control is synthesized using the proposed approach, is chosen as an illustrative example for the proposed methodology.

Motivated learning agent model for distributed collaborative systems

Automated systems have been seamlessly integrated into several industries as part of their industrial automation processes. Employing automated systems, such as autonomous vehicles, allows industries to increase productivity, benefit from a wide range of technologies and capabilities, and improve workplace safety. So far, most of the existing systems consider utilizing one type of autonomous vehicle. In this work, we propose a collaboration of different types of unmanned vehicles in maritime offshore scenarios. Providing high capacity, extended coverage, and better quality of services, autonomous collaborative systems can enable emerging maritime use cases, such as remote monitoring and navigation assistance. Motivated by these potential benefits, we propose the deployment of an Unmanned Surface Vehicle (USV) and an Unmanned Aerial Vehicle (UAV) in an autonomous collaborative communication system. Specifically, we design high-speed, directional communication links between a terrestrial control station and the two unmanned vehicles. Using measurement and simulation results, we evaluate the performance of the designed links in different communication scenarios and we show the benefits of employing multiple autonomous vehicles in the proposed communication system.