- Research Article
6
- 10.1016/0143-8174(87)90025-4
Dominant mechanisms in stochastic plastic frames
- Jan 01, 1987
- Reliability Engineering
- L.K Tang + 1 more +1
Dominant mechanisms in stochastic plastic frames
This paper outlines an improved simulation method for a time-dependent reliability analysis of structural systems subjected to stochastic loads. Strengths of structural elements are assumed to degrade with time proportionally during the life cycle of the structural system, and stochastic load events are modeled as Poisson processes. The structural failure probabilities are estimated through the life cycle simulation, in which the directional simulation method is applied just to sample random load variables to execute each life cycle simulation efficiently. Numerical examples are presented and results are compared with those obtained by the crude Monte Carlo simulation to show the effectiveness of the proposed method. It is shown that the proposed method is effective for the assessment of the time-dependent failure probability of structural systems.
Dominant mechanisms in stochastic plastic frames
Dominant mechanisms in stochastic plastic frames
Modified subset simulation method for reliability analysis of structural systems
Modified subset simulation method for reliability analysis of structural systems
Failure Probability and Security Risk Analysis of Gravity-Wharf Structures in Port Engineering
Xie, Y.; Li, P.; Xu, S.; Chen, J., and Feng, H., 2021. Failure probability and security risk analysis of gravity-wharf structures in port engineering. Journal of Coastal Research, 37(5), 1035–1041. Coconut Creek (Florida), ISSN 0749-0208. To assess the security risk of the gravity-wharf overall structure, the failure probability of the overall structure of the gravity wharf is analyzed based on the Rosenblueth method combined with the structural reliability theory. By constructing the serial system of a gravity wharf, a simplified failure model of the overall structure of a gravity wharf is established to obtain the failure probability of the whole wharf structural system. Thus, the security risk assessment of the gravity-wharf structure is realized. The calculation and analysis of the failure risk of a gravity caisson wharf indicates that the reliability index of the gravity-wharf structure at design low water level is much lower than that at design high water level. And at the design low water level, the overall structure has the largest failure probability. The reliability index of antisliding stability of a gravity caisson wharf at design low water level is about 20.6% lower than that at design high water level. And the reliability index of anti-overturning stability at design low water level is about 11.9% lower than that at design high water level. Meanwhile, the failure probability of anti-overturning of the caisson wharf structure is higher than that of antisliding at the same water level. The analysis method in this paper needn't consider the distribution characteristics of each parametric variable, the calculation efficiency of which is high. The analysis conclusions can provide reference for the failure probability and security risk assessment of the gravity-wharf overall structure.
Read more110 限界状態曲面上に初期値を定めるRF法に基づく設計点探索法の研究 : 設計点情報を用いたシミュレーションに基づく構造信頼性解析法(GS1,3 材料力学(1),研究討論セッション)
This study describes an efficient application of Rackwitz Fiessler algorithm to search out all of design points, utilized in the multimodal importance sampling simulation to estimate structural failure probabilities. The initial points to execute Rackwitz Fiessler algorithm are proposed to set in the respective quadrants of the basic random variable space and all of possible design points are determined. Numerical examples to estimate the failure probability of structural system with multiple and nonlinear limit state function by using multimodal importance sampling using all of design points determined are presented to illustrate that the proposed method gives accurate estimations effectively.
Read moreFailure Probability of Structural Systems in the Presence of Imprecise Uncertainties
Structural reliability evaluation is considered to be the solution for modern complex engineering systems possessing uncertain parameters. Reliability estimation involves probabilistic theory when the uncertainties are defined as random variables, whereas with limited resources, it is strenuous to estimate precise parameters in the structural model. Therefore, for such cases, imprecise parameters should be treated appropriately in the design and analysis stage for the improvement of serviceability of the system. On the other side, analyses involving multi-dimensional, computationally expensive, and highly nonlinear structures are formidable in simulation-based methods in the presence of uncertainties. An efficient uncertainty analysis procedure is presented in this paper for analysing the systems with imprecise uncertainties defined as probability-box variables. The estimated bounds of failure probability for the numerical examples from structural mechanics are compared with the traditional approaches to demonstrate the efficiency of the methodology.
Read moreApproximated Evaluation of Failure Probability for Structural System Using Conditional Safety Indices.
This paper deals with the approximated evaluation method for failure probability of structural systems using conditional safety indices. In general, it is difficult to compute an exact solution of the structural reliability problem with correlations of design variables and limit state functions. It is expected that the conditional safety index proposed will be a useful measure for the safety of complicated structural systems. The merit of this new measure is that the characteristics of statistics and geometry are identical on standardized space. Therefore the conditional safety index yields a practical effective interval of system reliability. When the high-order product sets of a failure event is obtained, the new assessment of the bounds for the estimation of failure probability is also significant. However, the evaluation process of conditional safety indices requires a sequential conditional correlation matrix so that it is the complicated process to calculate high-order simultaneous probability. This paper also proposes the method for transforming the vector of original safety indices into the vector of conditional safety indices using cholesky decomposition of the correlation matrix. In addition, it is suggested that the multi-integral can be approximated by the product of simple integrals using conditional safety indices.
Read moreHybrid probabilistic interval analysis of bar structures with uncertainty using a mixed perturbation Monte-Carlo method
Hybrid probabilistic interval analysis of bar structures with uncertainty using a mixed perturbation Monte-Carlo method
Efficient system reliability analysis illustrated for a retaining wall and a soil slope
Efficient system reliability analysis illustrated for a retaining wall and a soil slope
Saddlepoint approximation based structural reliability analysis with non-normal random variables
The saddlepoint approximation (SA) can directly estimate the probability distribution of linear performance function in non-normal variables space. Based on the property of SA, three SA based methods are developed for the structural system reliability analysis. The first method is SA based reliability bounds theory (RBT), in which SA is employed to estimate failure probability and equivalent normal reliability index for each failure mode firstly, and then RBT is employed to obtain the upper and the lower bounds of system failure probability. The second method is SA based Nataf approximation, in which SA is used to estimate the probability density function (PDF) and cumulative distribution function (CDF) for the approximately linearized performance function of each failure mode. After the PDF of each failure mode and the correlation coefficients among approximately linearized performance functions are estimated, Nataf distribution is employed to approximate the joint PDF of multiple structural system performance functions, and then the system failure probability can be estimated directly by numerical simulation using the joint PDF. The third method is SA based line sampling (LS). The standardization transformation is needed to eliminate the dimensions of variables firstly in this case. Then LS method can express the system failure probability as an arithmetic average of a set of failure probabilities of the linear performance functions, and the probabilities of the linear performance functions can be estimated by the SA in the non-normal variables space. By comparing basic concepts, implementations and results of illustrations, the following conclusions can be drawn: (1) The first method can only obtain the bounds of system failure probability and it is only acceptable for the linear limit state function; (2) the second method can give the estimation of system failure probability, and its error mostly results from the approximation of Nataf distribution for the joint PDF of the structural system performance functions and the linearization of the performance functions; (3) the SA based LS method can obtain the estimator of system failure probability, which converges to the actual value along with the increase of sample size. The SA based LS method considers the influence of nonlinearity of limit state function on the failure probability, and it is acceptable for the structural system both with a single failure mode and with multiple failure modes, therefore it has the widest applicability.
Read more물류보관 랙선반시설물의 시스템신뢰성 해석
This study proposes a system reliability analysis of rack storage facilities subjected to forklift colliding events. The proposed system reliability analysis consists of two steps: the first step is to identify dominant failure modes that most contribute to the failure of the whole rack facilities, and the second step is to evaluate the system failure probability. In the first step, dominant failure modes are identified by using a simulation-based selective searching technique where the contribution of a failure mode to the system failure is roughly estimated based on the distance from the origin in the space of the random variables. In the second step, the multi-scale system reliability method is used to compute the system reliability where the first-order reliability method (FORM) is initially used to evaluate the component failure probability (failure probability of one member), and then the probabilities of the identified failure modes and their statistical dependence are evaluated, which is called as the lower-scale reliability analysis. Since the system failure probability is comprised of the probabilities of the failure modes, a higher-scale reliability analysis is performed again based on the results of the lower-scale analyses, and the system failure probability is finally evaluated. The illustrative example demonstrates the results of the system reliability analysis of the rack storage facilities subjected to forklift impact loadings. The numerical efficiency and accuracy of the approach are compared with the Monte Carlo simulations. The results show that the proposed two-step approach is able to provide accurate reliability assessment as well as significant saving of computational time. The results of the identified failure modes additionally let us know the most-critical members and their failure sequence under the complicated configuration of the member connections.
Read moreDirect Statistical Simulation Method and Master Kinetic Equation
In this work the direct statistical simulation method for spatially uniform relaxation in rarefied gas is developed on the basis of a probabilistic interpretation for the integral representation of the master kinetic equation (Kats equation). It is shown that under certain conditions the conventional schemes for the relaxation simulation follow directly from this equation. A new accurate simulation scheme is proposed, the majorant frequency scheme, which requires a computing capacity that scales directly with the number of sampling particles. The relation between the solutions of the master kinetic equation of rarefied gas and the Boltzmann equation is studied for the uniform case. It is shown that the correlations occurring in the finite-number particle system affect significantly the statistical simulation results. The criterion for estimating the influence of such correlations during the computation process is suggested. Introduction At present, the direct statistical simulation method, based on splitting up the evolution of a gas system in two stages, is widely used in the dynamics of rarefied gas. The method is realized in the following way. The flowfield computed is divided into cells of a finite size Ax and, according to the initial distribution function, N sampling particles are placed into each cell. Then the spatially-uniform relaxation stage and the stage of a free-molecular transition are successively carried out in all the cells. The free-molecular transition simulation can be performed without difficulties. In this case, the realization of the spatially-uniform relaxation stage is of primary importance. Copyright © 1989 by the American Institute of Aeronautics and Astronautics, Inc. All rights reserved. * Institute of Theoretical and Applied Mechanics. t Computing Center, 171 172 M. S. IVANOV ET AL For the simulation of collisional relaxation, the numerical schemes suggested in Refs. 1-4 are used. All these schemes are derived from heuristic considerations on the basis of physical understanding of the relaxation process in an actual gas; as a result there is no direct relation with the Boltzmann kinetic equation. The heuristic character of these schemes allow comparative analysis only qualitatively, with the use of the Boltzmannian collision frequency as the main criterion. The stochastic process for an approximate solution of the Boltzmann equation is constructed in Ref. 8 using the Euler scheme for the Boltzmann spatiallyuniform equation with its further randomization. In such an approach, for colliding particles the conservation laws are not valid, and this is the basic difference from the schemes given in Refs. 1-4. It seems reasonable to consider the known numerical schemes for the statistical simulation of rarefied gas flows in light of a general theory of Monte Carlo techniques. Such a unified consideration enables one to carry out a comparative analysis to show the inner relation between these schemes and also justifies the use of various Monte Carlo weight techniques.^ Derivation of Simulation Technique from Master Kinetic Equation In the construction of the Monte Carlo numerical technique we shall directly proceed from the master kinetic equation for the N-particle distribution function, which in the spatially-uniform case has the following r°° {fN(t,cjj) fN(t,c)} | vi-vj | by dbij dey l C) K2(t'->t I c) cp (t,c) dc dt + cp0(t,c) /2) Jo J where 9 (t,c) = t) (c) f^ (t,c) is the collision density. DIRECT SIMULATION AND MASTER KINETIC EQUATION 173 9o(t,c)=fN(o,c)\)(c)exp{-\)(c)t} _ . _ • _ _ N _ _• '-* C) = -^Y D'^WCv^V;' I Vi,Vj) II 5(vm-Vm)
Read moreRandom Reliability Analysis of Gravity Retaining Wall Structural System
According to present deficiency of gravity retaining wall design method and considering the fuzzy uncertainties of the parameters of stochastic variables, first-order second-moment method (FOSM) is adopted to set up fuzzy random reliability analyzing model. By using decomposing theorem and by introducing cut set, fuzzy numbers were convened into a series of interval numbers and fuzzy random reliability computing technology was received. The major instability modes of gravity retaining walls are overturning and sliding. Two structural performance functions against overturning and sliding of gravity retaining walls were established and the fuzzy random variables were confirmed. Two kinds of invalid modes are calculated separately by the use of fuzzy random reliability computation method, which two fuzzy random reliability indexes and corresponding failure probabilities are obtained. Comparing the result of computation method with that of related literature, it is shows that obvious differences are between them. It is pointed out that structural performance function Z of the gravity retaining wall is assumed as normal distribution in related literature, which contributing to errors in the probability density function f(Z) in this treatment. The calculated results of fuzzy random reliability by adopting cut set way are conformed to reality better.
Read moreAdvances in System Reliability Analysis Under Uncertainty
In order to ensure high reliability of complex engineered systems against deterioration or natural and man-made hazards, it is essential to have an efficient and accurate method for estimating the probability of system failure regardless of different system configurations (series, parallel, and mixed systems). Since system reliability prediction is of great importance in civil, aerospace, mechanical, and electrical engineering fields, its technical development will have an immediate and major impact on engineered system designs. To this end, this chapter presents a comprehensive review of advanced numerical methods for system reliability analysis under uncertainty. Offering excellent in-depth knowledge for readers, the chapter provides insights on the application of system reliability analysis methods to engineered systems and gives guidance on how we can predict system reliability for series, parallel, and mixed systems. Written for the professionals and researchers, the chapter is designed to awaken readers to the need and usefulness of advanced numerical methods for system reliability analysis.
Read moreReliability-based Fire Protection of Structural Cables due to Deck Fires on Cable Supported Bridges
Cable supported bridges are typically part of community-critical infrastructure and therefore the consequences arising from extensive structural damage due to a fire and the subsequent operational discontinuity could be significant beyond the damage to the bridge itself and the cost of repairs. Bridge design standards generally do not provide guidance and hence fire resistance requirements are often informed by first principles assessments of the thermal and structural response of the structure to proposed fire scenarios. A deterministic assessment can provide a reasonable worst-case scenario but it does not allow bridge stakeholders to make informed decisions with regards to uncertainty and the low likelihood of fires occurring to identify the benefits of investments in structural fire protection. This is because the target reliability required for each bridge may be different depending on its characteristics, and the expected fire severity has a probabilistic nature. This research aims to fill this gap by undertaking a reliability-based analysis to assess the probability of structural failure by considering the probability of a fire of a given size occurring and the uncertainty in the incident location and wind. The methodology is demonstrated through the case study of an operational 450 m long cable supported bridge section and a fire scenario based on a liquid fuel tanker. Liquid tankers can result into two type of fire scenario: first, a fire being contained within the tanker; and secondly, a fire due to a pool on the deck. Both fire scenarios have been characterised and it was determined that the contained tanker scenario presents a more onerous design case owing to its more prolonged duration. A Monte Carlo analysis was undertaken for a total of 10,000 independent trials of the combination of the location of the fire and the wind direction. The frequency of the fire was also examined to establish the probability of structural failure of a cable. It was established that the inclusion of wind can sometimes reduce the estimated height at which cables may experience temperatures with the potential to cause cable failure. However, for a number of the cases, the estimated height can remain broadly similar (i.e. within a couple metres difference) to the worst-case calculated value. Based on this analysis, the influence of the required level of reliability as well the fire protection duration specification agreed with bridge stakeholders can be used to determine the height at which cable fire protection is necessary to reduce the probability of structural failure to a level acceptable to the stakeholders. This approach allows bridge designers and stakeholders to make informed decisions with regards to provision and extent of fire preventive/protective measures for cable supported bridges.
Read moreThe sensitivity of bridge safety to spatial correlation of load and resistance
The sensitivity of bridge safety to spatial correlation of load and resistance