Time synchronisation in wireless sensor networks under energy-efficient spanning tree protocol

QoSNET: An integrated QoS network for routing protocols in large scale wireless sensor networks

The efficient use of energy in wireless sensor networks is critical issue as the battery of a sensor node, in most cases, cannot be recharged or replaced after deployment. In order to detect an event, a sensor node spends most of the time in monitoring its environment, during which a significant amount of energy can be saved by placing the radio in the low power sleep mode when no reception and/or transmission of data is involved. In this paper, we discuss the design of a new MAC protocol for wireless sensor networks whose goal is to extend the lifetime of the network by avoiding major energy waste causes, such as collisions, overhearing and idle listening, without compromising other network performance measures such as network throughput. The performance of the protocol is studied by simulation and is compared to that of the well known S-MAC protocol which is designed to save energy and to the IEEE 802.11 protocol which is designed to maximize throughput.

Wireless sensor networks(WSN) are a kind of communication networks with in-dependent sensor nodes which could construct multi-hop ad hoc network to trans-fer data. The transport protocols for Wireless Sensor Network play an important role to promote the performance of the whole systems. This paper proposes a modified transport layer protocol for heterogeneous Wireless Sensor Networks(HWSN). As TCP is not suitable to use in HWSN directly, we design a modified transport protocol(named mTCP) based on TCP by a six-state finite state machine. Experimental results illustrate that our design can improve the communication capability of the transmission layer in heterogeneous wireless sensor networks significantly.

Wireless sensor networks are a promising application of the Internet of Things in the sustainable development of smart cities, and have been afforded significant attention since first being proposed. Authentication protocols aim to protect the security and confidentiality of legitimate users when accessing and transmitting data. However, existing protocols may suffer from one or more security flaws. Recently, Butt et al. proposed an energy-efficient three-factor authentication protocol for wireless sensor networks. However, their protocol is vulnerable to several attacks, and lacks certain security properties. In this paper, the causes of these design flaws are analyzed. Furthermore, we propose a novel three-factor authentication protocol (password, smart card, and biometric information) for wireless sensor networks in Internet of Things contexts. A dynamic anonymous strategy is designed to prevent privacy disclosure and to resist sensor node capture attacks, tracking attacks, and desynchronization attacks. The Find–Guess model and random oracle model are combined to prove the security of the proposed protocol. A comparative analysis with related schemes shows that the proposed protocol has higher security and is able to maintain a low computational overhead.

Wireless sensor networks congestion occurs easily due to its centralized traffic pattern. Normally, mono-sync wireless sensor network experiences multiple traffic flow congestion in the dense environment of the network, which leads to excess energy consumption and severe packet loss. To overcome these issues, a congestion detection and alleviation mechanism using cluster based heuristic optimized hierarchical routing protocol is proposed in this paper. Here, congestion detection and alleviation utilize the features of sensor nodes. The congestion is categorized into two types: (i) node level congestion and (ii) link level congestion. The node level congestion is detected by assessing the buffer utilization and the interval amid the consecutive data packets. The link level congestion is considered with computing link usage utilizing back-off step of round robin carrier sense multi-access with collision avoidance. Congestion detection and alleviation reactively affected node/link through cuckoo hosted rider search multi-hop routing algorithm. It has two phases: the cluster head selection and multi-path routing. Cluster head selection is performed through Taylor multiple random forest kernel fuzzy C-means clustering algorithm and multi-path routing is performed through cuckoo hosted rider search multi-hop routing algorithm. The simulation of the proposed method is done in network simulator tool. Here, the performance metrics, like packet delivery ratio, delay, energy consumption, packet drop, overhead, network lifetime and throughput are calculated. The experimental outcomes of the proposed technique shows 11.6%, 18.4% and 28.1% lower delay, 78.2%, 65.4% and 52.6% higher packet delivery ratio, and 29.2%, 37.4% and 40.8% lower packet drop compared with the existing methods, like congestion detection and alleviation using multi-attribute decision-making in optimization-based hybrid congestion alleviation routing protocol in wireless sensor networks, congestion detection and alleviation using hybrid K-means with greedy best first search algorithms in packet rate reduction utilizing adaptive weight firefly algorithm ant colony optimization based routing protocol in wireless sensor networks and congestion detection and alleviation using multi-input time on task optimization algorithm for altered gravitational search algorithm routing protocol in wireless sensor networks.

Wireless sensor networks are a new emerging area where swarm intelligence can be applied with interesting implications. In fact, a strong analogy between unicellular organism colonies and wireless sensor networks can be emphasized: a sensor network can be viewed as a “colony” of simple, scarce resource nodes that, autonomously, are able only to perform simple tasks, but all together can accomplish very complex problems. In this paper we propose a routing protocol for multisink Wireless Sensor Networks with interesting properties: self organization, fault tolerance and environmental adaptation. The proposed protocol was inspired by the well known behavior (in artificial life studies) of “Slime Mold”. Such colony of unicellular organisms organizes itself in clusters by pheromone generation and evaporation mechanisms. In a similar manner our protocol manages the data traffic towards multiple sink nodes using the gradient concept and reaching high levels of autonomy and fault tolerance. We analyze the proposed protocol to examine the performances, the signalling overhead and the adaptation properties to environmental changes or nodes faults using simulation techniques.

In wireless sensor networks, MAC protocol is used to achieve efficient, fair and balanced allocation of wireless channel resources and access control of nodes in the network, and to control the communication process of nodes in the network. The energy consumption of wireless sensor nodes is mainly concentrated in the communication unit, including: data transceiver, idle listening, protocol control overhead, etc. A good MAC protocol is beneficial to reduce unnecessary energy consumption and enhance node life time. At the same time, MAC protocol, as the bottom protocol of wireless sensor network, provides a stable and reliable communication foundation for the realization of the upper protocol. Therefore, a large number of scholars at home and abroad have carried out extensive and in-depth research on MAC layer protocol of network. In this paper, the research process and progress of MAC layer protocol in wireless sensor networks are analyzed, and the research progress of MAC layer protocol in multi-radio frequency and multi-channel wireless sensor networks is analyzed.

While multi-hop broadcast protocols, such as Trickle, Deluge and MNP, have gained tremendous popularity as a means for fast and convenient propagation of data/code in large scale wireless sensor networks, they can, unfortunately, serve as potential platforms for virus spreading if the security is breached. To understand the vulnerability of such protocols and design defense mechanisms against piggy-backed virus attacks, it is critical to investigate the propagation process of these protocols in terms of their speed and reachability. In this paper, we propose a general framework based on the principles of epidemic theory, for vulnerability analysis of current broadcast protocols in wireless sensor networks. In particular, we develop a common mathematical model for the propagation that incorporates important parameters derived from the communication patterns of the protocol under test. Based on this model, we analyze the propagation rate and the extent of spread of a malware over typical broadcast protocols proposed in the literature. The overall result is an approximate but convenient tool to characterize a broadcast protocol in terms of its vulnerability to malware propagation. We have also performed extensive simulations which have validated our model.

The appearance of wireless sensor networks has attracted worldwide attention. Wireless Sensor Networks (WSNs) and Wireless Multimedia Sensor Networks (WMSNs) consist of wirelessly interconnected sensor nodes organised arbitrarily or deterministically in an environmental area which can gather, distribute and route information in different application areas. Power consumption in these networks is the foremost problem. WSNs are a recent generation of sensor networks, have an ample range of applications, their expansion and application will convey about extensive impact in human life and construction of all areas. Some of the applications include disaster management, landslide detection, glacial monitoring, wildlife tracking, healthcare, military applications, environmental monitoring, security surveillance, industrial process control and a large number of applications to robotics and Internet of Things (IOT) projects. This paper will demonstrate the elementary description of WSN followed by different energy-efficient power consumption protocols. Here we have performed the comparative performance analysis of different energy-efficient protocols. In our work we have compared MODLEACH with TSEP followed by TSEP with RELSEP.

The existing routing protocols for wireless sensor networks were not reasonable in design, which limited their application. Most of the existing studies did not take into account the energy consumption of the network and the balanced use of the energy of sensor nodes, which led to the unsatisfactory application effect of wireless sensor networks in some fields. Therefore, from the perspective of energy balance in wireless sensor networks, this paper proposed a construction method of an energy balance routing protocol in wireless sensor networks based on a fuzzy control strategy. Firstly, based on the analysis of the basic composition of wireless sensor networks and the structure of sensor nodes, this paper expounded the basic process of wireless data transmission and summarized the classification and characteristics of routing protocols in wireless sensor networks from different angles. Secondly, according to the node data transmission characteristics of wireless sensor networks, the energy balance use model of sensor nodes was established, and the design method of the energy balance routing protocol based on fuzzy control strategy was proposed, and the data transmission link was optimized. Finally, through experimental comparative analysis, the results showed that the energy balanced routing protocol proposed in this paper can effectively realize the energy balanced use of the network data transmission process. Compared with other common routing protocols, the wireless sensor network routing protocol proposed in this paper can not only improve the data transmission efficiency and reduce the data redundancy but also save energy consumption and prolong the network running time. The design method of routing protocol proposed in this paper will be conducive to the optimization and application of routing protocol in wireless sensor networks and provide a theoretical basis for the related research of wireless sensor networks.

Cluster based routing protocols for Wireless Sensor Networks (WSNs) have been widely used for better performance in terms of energy efficiency. Efficient use of energy is challenging task of designing these protocols. Energy holes are created due to quickly drain the energy of a few nodes due to nonuniform node distribution in the network. Normally, energy holes make the data routing failure when nodes transmit data back to the sink. We propose Energy-efficient HOle Removing Mechanism (E-HORM) technique to remove energy holes. In this technique, we use sleep and awake mechanism for sensor nodes to save energy. This approach finds the maximum distance nodes to calculate the maximum energy for data transmission. We consider it as a threshold energy E <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">th</sub> . Every node first checks its energy level for data transmission. If the energy level of node is less than E <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">th</sub> , it cannot transmit data.

Wireless sensor networks (WSNs) have gained much attention in today’s research domain for supporting a wide variety of applications including the multimedia applications. Multimedia applications that are regarded as the quality-of-service (QoS)-aware, delay sensitive, and bandwidth hungry applications require enough energy and communication resources. WSNs being the energy-scarce network have now been designed in such a way that they can support these delay-sensitive and time-critical applications. In this paper, we propose an energy-efficient routing protocol for heterogeneous WSNs to support the delay sensitive, bandwidth hungry, time-critical, and QoS-aware applications. The proposed QoS-aware and heterogeneously clustered routing (QHCR) protocol not only conserves the energy in the network, but also provides the dedicated paths for the real-time and delay sensitive applications. The inclusion of different energy-levels for the heterogeneous WSNs also provides the stability in the networks while minimizing the delay for the delay-sensitive applications. Extensive simulations have been performed to validate the effectiveness of our proposed scheme. Our proposed routing scheme outperforms other state-of-the-art schemes in terms of the delay performances.

Using wireless sensor networks (WSNs) in delay and reliability critical environments is highly desired due to their unique advantages such as low cost, ease of deployment, and redundancy. However, successful deployment of resource-limited WSNs in such applications requires strict quality-of-service (QoS) provisioning techniques to meet the desired latency and reliability targets of those applications. Implementation of QoS techniques in WSNs is significantly challenging since WSNs have been initially devised for low-data-rate non-real-time applications. Therefore, WSN designers and developers resort to different cross-layer interaction and optimization techniques to provision QoS in WSNs. In this paper, we present a survey on the state of the art of cross-layer QoS approaches in wireless terrestrial sensor networks to achieve delay and reliability bounds in critical applications. Our paper provides a unique classification of cross-layer QoS approaches in WSNs that allows surveying a large amount of studies with utmost clarity. Furthermore, we highlight the main challenges of implementing QoS protocols in WSNs and present an overview of QoS-aware WSN applications.

Wireless Sensor Networks (WSNs) play a necessary position in todays actual world applications. WSNs are a team of autonomous sensor nodes that are geographically distributed to accumulate information and monitor events. WSNs are similarly sense that they rely on wireless connectivity and spontaneous formation of networks so that sensor information can be transported via wireless. Sometimes called dust network, minute sensors as small as dust referring to smart dust. WSNs are spatially distributed two to screen or bodily temperature, sound, pressure, etc. and to cooperatively ignore their data via the network to different locations. Each such sensor network node has typically various parts. Routing in WSNs in one of the important technique, because all node executes its battery power, if may be one node failure it collapse entire networks. Routing in WSNs is in reality difficult due to the intrinsic characteristics that differentiate these networks from different networks. The plan of routing protocols in WSN is affected via number of exigent factors. In this paper, a review on routing protocols for Wireless Sensor Networks (WSNs) and performance of its execution.

Classical clustering protocols in wireless sensor networks (WSNs) assume that all nodes are equipped with the same amount of energy. As a result, they cannot take full advantage of the presence of node heterogeneity. In this study, a stable and energy‐efficient clustering (SEEC) protocol for heterogeneous WSNs is proposed. In addition, the extension to multi‐level of SEEC is presented. It depends on the network structure that is divided into clusters. Each cluster has a powerful advanced node and some normal nodes deployed randomly in this cluster. In the multi‐level architectures, more powerful supper nodes are assigned to cover distant sensing areas. Each type of nodes has its role in the sensing, aggregation or transmission to the base station. At each level of heterogeneity, the optimum number of powerful nodes that achieves the minimum energy consumption of the network is obtained. The proposed protocol is a heterogeneous awareness to prolong the stability period, which is crucial for many applications. The performance of the proposed protocol is compared by existing homogeneous and heterogeneous protocols. Simulation results show that the proposed protocol provides a longer stability period, more energy efficiency and higher average throughput than the existing protocols.