Timing jitter dependence on data format for ideal dispersion compensated 10 Gbps optical communication systems

Optical fiber communication has characteristics that really need attention. The characteristics of fiber optic transmission are very important in designing optical fiber networks, one of which is widening pulses called dispersions. Dispersion is the widening of light pulses in optical fibers which reduces data speed, signal to noise ratio and system quality. In addition to dispersion compensation, which is the most important feature needed in fiber-optic communication systems; transmission power needs to be considered to produce optimal signal output. In this paper, we will simulate the optimization effect of power and fiber dispersion compensation on Non Return to Zero (NRZ) and Return to Zero (RZ) modulation on optical transmission systems, with 5 dBm power parameters, 10 dBm 15 dBm and 0 dBm and DCF 5 km, 10 km, 15 km, 20 km and 25 km. Simulation results show that dispersion compensation is very influential on the transmission system. From these two modulations, there are differences in the results between NRZ and RZ. The results of dispersion compensation also affect the input power and DCF length.

The efficient and accurate evaluation of the transmission performance of high-capacity optical communication systems has always attracted significant research attentions. The enhanced Gaussian noise (EGN) model is considered as an excellent solution to predict the system performance taking into account linear and nonlinear transmission impairments. Since the conventional form of the EGN model is complicated and intractable for a fast computation, the closed-form simplification has been regarded as a direction to significantly reduce the computational complexity. However, the accuracy of such a closed-form EGN model becomes a main concern in the application of ultra-wideband optical communication systems. In this work, we have investigated the accuracy of the closed-form EGN model for ultra-wideband optical fiber communication systems, where the performance of the system using electronic dispersion compensation, multi-channel nonlinearity compensation and full-field nonlinearity compensation has been evaluated in terms of symbol rate, number of channels and signal power. Our work will provide an insight on the application of the EGN model in next-generation ultra-wideband long-haul optical fiber communication networks.

Bit error rate (BER) performances of DPSK are researched for space uplink optical communication system. Considering further phase fluctuation effect based on the traditional atmospheric turbulence model, BER performance versus transmission power, zenith angle, frequency deviation, divergence angle and transmission diameter are discussed for different wavelengths. Simulations, especially, indicate that considering the phase fluctuation effect, BER performance is sensitive for low frequency deviation. It also confirms that wavelength of 1550nm on communication system is still a good choice for the better BER performance. This work is helpful for enhancing transmission quality and the design of space optical communication system.

Performance of optical chaotic communication systems using multimode vertical cavity surface emitting lasers

Optical communication systems provide high data rates to fulfil users’ demands. In addition, the modulation format is essential to the system’s transmission quality and spectral efficiency. Furthermore, the effects of chromatic dispersion, which impair the performance and quality of transmitted signals, are mitigated using dispersion compensation techniques. In optical communication systems, dispersion compensation techniques are essential for preserving signal quality, increasing transmission distances, improving system performance, and offering network designers flexibility. These methods seek to improve signal quality and enable transmission at longer distances by reducing or eliminating the distortion brought on by dispersion. This paper uses a symmetrical compensation technique to analyze the performance of the CSRZ modulation format-based optical communication system. The research is conducted within a communication range of 150–350 km. The system is evaluated in terms of input power, filter order, and filter depth. The results indicate that the proposed system performed better at an input power of 4 dBm using a third-order filter and 60 dB filter depth.

Design and comparative performance evaluation of chirped FBG dispersion compensation with DCF technique for DWDM optical transmission systems

Optical fiber communication is favored by many communication manufacturers because of its low interference, large capacity, long distance and low consumption. Extending the transmission distance of optical fiber communication system will result in attenuation loss. Therefore, it is necessary to improve the incident power of the initial optical fiber, but it will be affected by Raman scattering effect, thus reducing the performance of the overall optical fiber communication system. In order to overcome the above problems, Raman amplifier is used to pump high-power short-wavelength light wave and amplify long-wavelength and low-power signals, but the flattening of signal gain needs to be considered. In this study, the working principle of Raman amplifier is introduced, the Raman pump module is optimized, the system architecture of the module is studied, and the module circuit is designed. It mainly covers the structure design, driving circuit design and auxiliary circuit design of the module. In the experimental process, based on the transmission coupling equation of the fiber Raman amplifier, the distribution of pump and signal power on the fiber is calculated by numerical analysis. By optimizing the pump module, the gain flatness of the amplification system is optimized, and the signal gain of the whole fiber communication system is reduced by more than 80%. It proves that the optimal design of fiber Raman amplifier proposed in this study is effective and can achieve the overall stability of signal reception in the application of optical fiber communication system.

Space-division multiplexing (SDM) has emerged as a promising technology for both classical and quantum communications. Twisted light, particularly in the form of orthogonal optical vortex beams, offers significant potential for SDM by enhancing the capacity and performance of optical communication systems. A critical component in such systems is a twisted light (de)multiplexer, which enables scalable and efficient (de)multiplexing of twisted light to meet the demands of high-capacity optical communications. In this work, we propose and experimentally demonstrate quasi-wavelet conformal mapping microstructures for efficient twisted light demultiplexing. These microstructures, specifically designed and fabricated for this experiment, successfully demultiplex 11 optical vortex beams with a low crosstalk below −20.9 dB at the target wavelength. Moreover, the microstructures exhibit a broad operational bandwidth (1525–1570 nm), maintaining crosstalk levels under −13 dB. To further validate their performance, the microstructures are also tested in the demultiplexing of various configurations of multiplexed two-channel optical vortex beams. The presented quasi-wavelet conformal mapping microstructures with compact size and exceptional demultiplexing performance hold great promise for applications in high-capacity optical communication systems using twisted light.

Free-space optical communication has emerged as a pivotal technology for space-to-ground downlinks; however, signal degradation caused by atmospheric turbulence continues to pose a significant challenge. In this study, a model for the polarization transmission characteristics of a Gaussian-Schell model (GSM) beam in downlink was established, and conditions sufficient for maintaining the polarization transmission characteristics were derived. The impact of the source spatial coherence on the performance of optical communication systems using circular polarization shift keying (CPolSK) modulation was investigated. Additionally, models for the probability density distribution and scintillation index of the optical intensity under atmospheric turbulence were developed along with a bit error rate model for the optical communication system. The effects of the laser spatial coherence on these models were also analyzed. The results indicate that the optimal performance in the turbulent downlink is achieved with fully coherent light, where the GSM-beam-based CPolSK-modulated system demonstrates a reduction of 1.51 dB in the required power compared to that of an on–off keying system. The implications of this study suggest that optimizing spatial coherence could significantly enhance the reliability of space-to-ground communication systems under atmospheric disturbances.

At present, optical fiber communication systems are developing in the direction of large capacity, high speed, long distance, etc., making nonlinear effects and polarization mode dispersion (PMD) and other optical fiber performance defects that were negligible for low-rate systems become the main factors limiting system upgrades and transmission distances. Polarization mode dispersion is an important factor affecting the performance of optical fiber communication systems, and it has become one of the main obstacles to the development of high-speed and long-distance optical fiber communication systems. It can cause pulse widening in the digital transmission system, thereby limiting the transmission rate of the system. Therefore, the influence of polarization mode dispersion on the transmission system and the compensation method are analyzed in this paper.

A numerical investigation of the performance of an open-loop optical chaotic communication system for the isochronous synchronization solution has been carried out, under strong optical injection conditions achieved using antireflective coating at the input facet of the receiver laser in combination with an optical erbium-doped fiber amplifier (EDFA). Different message encoding techniques have been considered and tested at multigigabit rates and for different levels of optical injection to the receiver. The effects induced by the amplified spontaneous emission (ASE) noise of the EDFA to the performance of the chaotic communication system have also been studied. The performance of all the examined encryption methods for the 1 Gb/s bit-rate messages was quite satisfactory and was characterized by Q-factor values that exceeded 10, after synchronizing in the strong injection regime. For higher message bit rates, the Q-factor values for all methods decrease considerably due to the residual frequency components of the chaotic carrier that are now more significant in the message spectral region. The effect of the amplifier's ASE noise to the system's performance was deteriorated as long as the EDFA chaotic input was kept in relatively high power levels.

Under an optical nonreturn-to-zero (NRZ) data injection at 10 Gbit/s, the 10-GHz mode-locking and pulsed return-to-zero (RZ) clock extraction from a semiconductor optical amplifier (SOA) based fiber ring is investigated in this paper. The diagnoses on gain and intracavity-power-controlled anomalous blueshifted spectrum and subpicosecond timing jitter are demonstrated. By increasing the injecting power of the optical NRZ data from -3 to 8 dBm into the SOA bias at different currents, the mode locking is completed with a dc level greatly decreasing from 480 to 50 ¿W (only 1.5% of the mode-locked pulse power at 3 mW), corresponding to a pulse/dc amplitude contrast ratio up to 18 dB. Increasing the SOA bias current up to 350 mA significantly suppresses the timing jitter from 1.8 ps to 345 fs, and the extracted RZ clock pulse is shortened from 55 to 27 ps. The pulsewidth of the amplified SOAFL is compressed from 11 ps to 836 fs after dispersion compensation. At constant data injection level, the increasing SOA bias or gain oppositely redshifts the mode-locked SOA fiber ring laser (SOAFL) spectrum by 5 nm. The amplifier spontaneous emission of SOA at short wavelength region ( ~ 1520 nm) is eliminated with increasing NRZ data power, whereas the mode-locking gain peak arises and blueshifts from 1558 to 1552 nm due to the band-filling effect. Such a blueshift in mode-locking spectrum becomes more significant in SOA at lower bias (or gain) condition. A theoretical model interprets the correlation between the nonlinear gain suppression-induced variation of electron-hole plasma in SOA and the blueshifted mode-locking SOAFL spectrum, which is occurred when the gain saturation condition for the SOA becomes more pronounced.

This paper describes the demonstration of a simple all-optical data format conversion scheme between return-to-zero (RZ) and nonreturn-to-zero (NRZ) that employs a semiconductor optical amplifier (SOA) in a nonlinear optical loop mirror. The format conversion has been performed between the most widely used data formats-NRZ and RZ formats. The format conversion scheme is based on gain variation by an intensity-dependent phase change in an SOA-loop mirror. The input data stream acts as a control signal that induces the phase differences between clockwise- and counterclockwise-propagating data inside an SOA-loop mirror. It is possible to change the data format of the output data stream by controlling the phase differences of the clockwise and counterclockwise pulse in an SOA-loop mirror appropriately. For the converted NRZ data from RZ data, 10-Gb/s error-free transmission up to 78 km over standard single-mode fiber has been obtained. By comparing the conventional NRZ transmission with the Mach-Zehnder modulation scheme, the proposed RZ-to-NRZ conversion shows an improved transmission performance. The NRZ-to-RZ conversion has clear eye openings up to 78 km. On the contrary, the conventional RZ binary data from a mode-locked laser has a nearly closed eye even at 52 km. The converted RZ data has a 2-dB conversion power margin to the injected NRZ data, which indicates an increase in the receiver sensitivity due to the signal format conversion. The improved transmission distance of the converted RZ signal is due to the duobinary coding effect of the SOA-loop mirror. The SOA has the possibility of high-speed operation over 40 Gb/s, and the SOA-loop mirror has the capabilities of format and wavelength conversions. Therefore, the SOA-loop mirror can be a universal building block in future all-optical networks. In addition, the proposed format conversion scheme can serve as an important format converter between the ultrafast optical-time-division-multiplexed networks and the lower line-rate wavelength-division-multiplexed networks.

With the volumes of transmitted information growth, the task of increasing the noise immunity and reliability of data transmission networks arises. The presence of interference such as nonlinear loss, chromatic dispersion, polarization mode dispersion, and inter-channel interference decreases the performance of fiber optical communication systems. Forward Error Correction (FEC) codes are vital in optical communication systems to achieve highly efficient and highly reliable communication. The paper presents research on a simulation model where FEC channel-coding schemes based on the Bose-Chaudhuri-Hocquenghem (BCH) cycling block code are integrated with non-return-to-zero on-off-keying (NRZ-OOK) modulated wavelength division multiplexed (WDM) fiber optical communication systems. The results highlight the selection of coding parameters in the adopted FEC approach. In our paper, the BCH (255, 231), BCH (255, 223), and BCH (255,191) FEC channel-coding schemes are chosen for integration in the NRZ-OOK modulated WDM optical transmission system. The paper shows the main advantages and drawbacks of the selected FEC coding scheme and provides a comparison of the proposed schemes based on their main features, such as bit error ratio (BER), which were obtained through the simulations of 25 Gbit/s NRZ-OOK WDM fiber optical system. The dynamics of changes in BER was investigated using the Monte Carlo (MC) method for precise results. The paper shows that integration of FEC channel-coding schemes based on the BCH codes improves the noise immunity and reliability of the WDM Fiber Optical Communication Systems.

We investigated the performance of wireless optical communication systems with polarization shift keying modulation when the atmospheric turbulence is anisotropic. Based on the unified theory of polarization and coherence, the characteristic of polarization crosstalk on propagation was shown. Moreover, we explored the effects of propagation distances and turbulent parameters on the signal-to-noise ratio loss of communication system. The results illustrated that polarization crosstalk of horizontal direction on the vertical direction is the main factor affecting communication performance. And it is more conducive to transmit information when the turbulence is anisotropic and the difference between two anisotropic factors is small.