Tissue engineering vascular grafts a fortiori: looking back and going forward

Successful construction of a small-diameter bioartificial vascular graft remains a great challenge. This study reports on novel tissue engineering vascular grafts (TEVGs) constructed by endothelial progenitor cells and heparin-coated decellularized vessels (DV). The DVs were fabricated from canine carotid arteries with observable depletion of cellular components. After heparin coating, the scaffolds possessed excellent antithrombogeneity. Canine endothelial progenitor cells harvested from peripheral blood were expanded and seeded onto heparin-coated DVs and cocultured in a custom-made bioreactor to construct TEVGs. Thereafter, the TEVGs were implanted into the carotid arteries of cell-donor dogs. After 3 months of implantation, the luminal surfaces of TEVGs exhibited complete endothelium regeneration, however, only a few disorderly cells and thrombosis overlaid the luminal surfaces of control DVs grafts, and immunofluorescent staining showed that the seeded cells existed in the luminal sides and the medial parts of the explanted TEVGs and partially contributed to the endothelium formation. Specifically, TEVGs exhibited significantly smaller hyperplastic neointima area compared with the DVs, not only at midportion (0.64 ± 0.08 vs. 2.13 ± 0.12 mm(2) , p < 0.001), but also at anastomotic sites (proximal sites, 1.03 ± 0.09 vs. 3.02 ± 0.16 mm(2), p < 0.001; distal sites, 1.84 ± 0.15 vs. 3.35 ± 0.21 mm(2), p < 0.001). Moreover, TEVGs had a significantly higher patency rate than the DVs after 3 months of implantation (19/20 vs. 12/20, p < 0.01). Overall, this study provided a new strategy to develop small-diameter TEVGs with excellent biocompatibility and high patency rate.

An exploratory study on the preparation and evaluation of a “same-day” adipose stem cell–based tissue-engineered vascular graft

Autologous endothelialized small-caliber vascular grafts engineered from blood-derived induced pluripotent stem cells

Cardiovascular diseases (CVD) remain the leading cause of morbidity and mortality in the world, among which coronary artery diseases (CAD) are the most common type of CVD. Coronary artery bypass grafting (CABG) using autologous vein and artery grafts is the typical surgical intervention for CAD patients. However, for patients whose autologous grafts are not available, there are no appropriate substitutes for vascular grafts. Investigation of tissue-engineered vascular graft (TEVG) has persisted over decades with significant advancement, utilizing different types of biomaterials. In the past two decades, a great number of studies based on cell-seeding strategies were reported. However, limitations of cell-based strategies made clinical application difficult. With the understanding of stem cells and tissue remodeling process, strategies without cell-seeding emerged as potential methods to achieve in situ regeneration. A cell-free graft may recruit host cells and guide their participation in vascular remodeling. The grafts modified by bio-active molecules showed good results in promoting in situ regeneration and exhibited potential to make the vascular grafts off-the-shelf. In this review, the strategies for cell-free TEVG manufacturing were discussed, including the materials for fabricating TEVGs, the methods of functionalization to promote in situ regeneration, the challenges researchers faced in TEVG investigation, and finally the prospects in TEVG design.

Tissue-engineered vascular grafts (TEVGs) require adequate extracellular matrix (ECM) to withstand arterial pressure. Tissue transglutaminase (TG2) and lysyl oxidase (LOX) are enzymes that cross-link ECM proteins and play a pivotal role in the development of vascular stiffness associated with aging. The purpose of this study is to investigate the expression of ECM cross-linking enzymes and mechanisms of scaffold degeneration leading to vascular stiffness in TEVG remodeling. Fast- and slow-degrading electrospun TEVGs were fabricated using polydioxanone (PDO) and poly(L-lactide-co-caprolactone) (PLCL) copolymer, with a PDO/PLCL ratio of 9:1 for fast-degrading and 1:1 for slow-degrading graft. These grafts were implanted in rats (n = 5/group) as abdominal aortic interposition conduits. The grafts were harvested at 1 month to evaluate patency, mechanical properties, vascular neotissue formation, and the expression of ECM cross-linking enzymes. All TEVGs were patent without any aneurysmal formation at 1 month. ECM area, TG2-positive area, and LOX-positive area were significantly greater in fast-degrading TEVGs compared to slow-degrading TEVGs, with significantly less remaining scaffold. The mechanical properties of fast-degrading TEVGs were similar to that of native aorta, as demonstrated by strain-stress curve. In conclusion, at 1 month, fast-degrading TEVGs had rapid and well-organized ECM with greater TG2 and LOX expression and native-like mechanical properties, compared to slow-degrading TEVGs. Impact statement Around 1.4 million patients in the United States require arterial prostheses each year due to cardiovascular diseases. Current synthetic vascular grafts suffer from increased risk of infection, thrombosis, a lack of endothelialization, and compliance mismatch to the native vasculature. Tissue-engineered vascular graft (TEVGs) presented in this study exhibited tunable biodegradation profiles by controlling the polymer ratio of polydioxanone/poly(L-lactide-co-caprolactone). One month after implantation, the fast-degrading TEVGs exhibited mechanical properties similar to that of native aorta, formation of endothelium, and well-organized extracellular matrix (ECM) with increased expression of tissue transglutaminase and lysyl oxidases, which are critical to the ECM remodeling process.

First long-term preclinical evaluation of woven vascular grafts made from human cell-assembled extracellular matrix.

Nondegradable synthetic polymer vascular grafts used in cardiovascular surgery have shown serious shortcomings, including thrombosis, calcification, infection, and lack of growth potential. Tissue engineering of vascular grafts with autologous stem cells and biodegradable polymeric materials could solve these problems. The present study is aimed to develop a tissue-engineered vascular graft (TEVG) with functional endothelium using autologous bone marrow-derived cells (BMCs) and a hybrid biodegradable polymer scaffold. Hybrid biodegradable polymer scaffolds were fabricated from poly(lactide-co-epsilon-caprolactone) (PLCL) copolymer reinforced with poly(glycolic acid) (PGA) fibers. Canine bone marrow mononuclear cells were induced in vitro to differentiate into vascular smooth muscle cells and endothelial cells. TEVGs (internal diameter: 10 mm, length: 40 mm) were fabricated by seeding vascular cells differentiated from BMCs onto PGA/PLCL scaffolds and implanted into the abdominal aorta of bone marrow donor dogs (n = 7). Eight weeks after implantation of the TEVGs, the vascular grafts remained patent. Histological and immunohistochemical analyses of the vascular grafts retrieved at 8 weeks revealed the regeneration of endothelium and smooth muscle and the presence of collagen. Western blot analysis showed that endothelial nitric oxide synthase (eNOS) was expressed in TEVGs comparable to native abdominal aortas. This study demonstrates that vascular grafts with significant eNOS activity can be tissue-engineered with autologous BMCs and hybrid biodegradable polymer scaffolds.

Construction of vascular grafts based on tissue-engineered scaffolds

A bilayered elastomeric scaffold for tissue engineering of small diameter vascular grafts

Pathologies related to the cardiovascular system are the leading causes of death worldwide. One of the main treatments is conventional surgery with autologous transplants. Although donor grafts are often unavailable, tissue-engineered vascular grafts (TEVGs) show promise for clinical treatments. A systematic review of the recent scientific literature was performed using PubMed (Medline) and Web of Science databases to provide an overview of the state-of-the-art in TEVG development. The use of TEVG in human patients remains quite restricted owing to the presence of vascular stenosis, existence of thrombi, and poor graft patency. A total of 92 original articles involving human patients and animal models were analyzed. A meta-analysis of the influence of the vascular graft diameter on the occurrence of thrombosis and graft patency was performed for the different models analyzed. Although there is no ideal animal model for TEVG research, the murine model is the most extensively used. Hybrid grafting, electrospinning, and cell seeding are currently the most promising technologies. The results showed that there is a tendency for thrombosis and non-patency in small-diameter grafts. TEVGs are under constant development, and research is oriented towards the search for safe devices.

The development of a living, autologous vascular graft with the ability to grow holds great promise for advancing the field of pediatric cardiothoracic surgery. To evaluate the growth potential of a tissue-engineered vascular graft (TEVG) in a juvenile animal model. Polyglycolic acid nonwoven mesh tubes (3-cm length, 1.3-cm id; Concordia Fibers) coated with a 10% copolymer solution of 50:50 L-lactide and epsilon-caprolactone were statically seeded with 1 x 10 cells/cm autologous bone marrow derived mononuclear cells. Eight TEVGs (7 seeded, 1 unseeded control) were implanted as inferior vena cava (IVC) interposition grafts in juvenile lambs. Subjects underwent bimonthly magnetic resonance angiography (Siemens 1.5 T) with vascular image analysis (www.BioimageSuite.org). One of 7-seeded grafts was explanted after 1 month and all others were explanted 6 months after implantation. Neotissue was characterized using qualitative histologic and immunohistochemical staining and quantitative biochemical analysis. All grafts explanted at 6 months were patent and increased in volume as measured by difference in pixel summation in magnetic resonance angiography at 1 month and 6 months. The volume of seeded TEVGs at explant averaged 126.9% +/- 9.9% of their volume at 1 month. Magnetic resonance imaging demonstrated no evidence of aneurysmal dilation. TEVG resembled the native IVC histologically and had comparable collagen (157.9 +/- 26.4 microg/mg), elastin (186.9 +/- 16.7 microg/mg), and glycosaminoglycan (9.7 +/- 0.8 microg/mg) contents. Immunohistochemical staining and Western blot analysis showed that Ephrin-B4, a determinant of normal venous development, was acquired in the seeded grafts 6 months after implantation. TEVGs demonstrate evidence of growth and venous development when implanted in the IVC of a juvenile lamb model.

To accelerate the fabrication of thick-walled autologous tissue-engineered vascular grafts (TEVGs), a novel biotube inserting technique was developed. After 2 weeks of subcutaneous embedding in rabbits, silicone rods (diameter, 3 mm; length, 35 mm) became encapsulated in connective tissues. Single-layered biotubes were obtained after removing the silicone rods. One silicone rod encapsulated in tissues was inserted into a single-layered biotube to form two layers of autologous tubular tissues. Three layers of autologous tubular tissues were also obtained by applying the same technique. Following a 2-week re-embedding procedure, two layers or three layers of autologous tubular tissues were integrated to form two-layered or three-layered TEVGs. Both wall thickness and burst pressure of three-layered TEVGs were significantly higher than those of two-layered and single-layered TEVGs (P < 0.05). The two-layered TEVGs could be applied as small-caliber vascular grafts, and three-layered TEVGs could be applied as medium- or large-caliber vascular grafts.

Cardiovascular disease is anticipated to remain the leading cause of death globally. Due to the current problems connected with using autologous arteries for bypass surgery, researchers are developing tissue-engineered vascular grafts (TEVGs). The major goal of vascular tissue engineering is to construct prostheses that closely resemble native blood vessels in terms of morphological, mechanical, and biological features so that these scaffolds can satisfy the functional requirements of the native tissue. In this setting, morphology and cellular investigation are usually prioritized, while mechanical qualities are generally addressed superficially. However, producing grafts with good mechanical properties similar to native vessels is crucial for enhancing the clinical performance of vascular grafts, exposing physiological forces, and preventing graft failure caused by intimal hyperplasia, thrombosis, aneurysm, blood leakage, and occlusion. The scaffold’s design and composition play a significant role in determining its mechanical characteristics, including suturability, compliance, tensile strength, burst pressure, and blood permeability. Electrospun prostheses offer various models that can be customized to resemble the extracellular matrix. This review aims to provide a comprehensive and comparative review of recent studies on the mechanical properties of fibrous vascular grafts, emphasizing the influence of structural parameters on mechanical behavior. Additionally, this review provides an overview of permeability and cell growth in electrospun membranes for vascular grafts. This work intends to shed light on the design parameters required to maintain the mechanical stability of vascular grafts placed in the body to produce a temporary backbone and to be biodegraded when necessary, allowing an autologous vessel to take its place.

In-vivo assessment of a tissue engineered vascular graft computationally optimized for target vessel compliance

An off-the-shelf, small diameter tissue engineered vascular graft (TEVG) would be transformative to surgeons in multiple subspecialties. Herein, the results of a small diameter (ID ≈ 1 mm) vascular graft constructed from resorbable, amino acid-based poly(ester urea) (PEU) are reported. Electrospun PEU grafts of two different wall thicknesses (type A: 250 μm; type B: 350 μm) are implanted as abdominal infra-renal aortic grafts in a severe combined immune deficient/beige mouse model and evaluated for vessel remodeling over one year. Significantly, the small diameter TEVG does not rupture or lead to acute thrombogenic events during the intervals tested. The pilot TEVG in vivo shows long-term patency and extensive tissue remodeling with type A grafts. Extensive tissue remodeling in type A grafts leads to the development of well-circumscribed neovessels with an endothelial inner lining, a neointima containing smooth muscle cells. However, due to slow degradation of the PEU scaffold materials in vivo, the grafts remain after one year. The type B grafts, which have 350 μm thick walls, experience occlusion over the one year interval due to intimal hyperplasia. This study affords significant findings that will guide the design of future generations of small diameter vascular grafts.