Topology optimization for transient thermoelastic structures under time-dependent loads

Multiscale concurrent topology optimization of transient thermoelastic structures

This paper will give a short survey about topology optimization of structures. It is particularly focused on topological shape optimization of structures using level-set methods, including the level-set based standard methods and the level-set based alternative methods. The former often directly solve the Hamilton-Jacobi partial differential equation (H-J PDE) to obtain the boundary velocity field using Finite Differential Methods (FDM), and the later commonly employ parametric or equivalent methods to evaluate the velocity field without directly solving the H-J PDE. The unique characteristics of the level-set based topology optimization methods are discussed, and a future perspective and prospects in this research area is also included. A benchmark numerical example is used to showcase the effectiveness of the level-set based methods.

Structural topology optimization seeks to identify the most efficient way to allocate material within a given domain to achieve a specific design objective. This research area has broad applications in various fields, including mechanical design and other physical disciplines. Over the past two decades, a great variety of applications and diverse research papers on structural topology optimization have been undertaken and published in the last two decades to highlight its acceptance and advantages. This paper presents a scientometric analysis of 5713 papers published between 2000 and 2022 to provide an overview and visualization of the development of structural topology optimization. While there are numerous approaches to topology optimization, this study focuses on presenting a quantitative analysis of the most popular and influential methods. The method used in this paper involved data collection and analysis through CiteSpace, one of the most popular software tools in this field. This paper provides a comprehensive overview of the latest developments of research in structural topology optimization and identifies key directions for future research. The analysis of the top 10 co-cited articles revealed four main approaches that have been developed for structural topology optimization.

During the last 20 years, structural optimization has become one of the most important topics of engineering applications. Design optimization of structure has been an interesting area of research in the field of engineering design for its ability to short the design cycle and to enhance product quality. Significant research activity has occurred in the area of structural optimization in the last decade. Especially for topology optimization of structure, many new theoretical, algorithmic, and computational contributions have resulted by researchers and engineers. Topology optimization is a powerful tool for global and multi-scale design of macrostructures, microstructures, and the cell of prescribed composite materials. The population based evolutionary algorithms have emerged as powerful mechanism for finding optimum solutions of complex optimization problems in engineering during the last two decades. Evolutionary computation is the study of computational systems which use ideas and get inspiration from natural evolution and adaptation [1]. The thinking has wide application in various engineering fields, such as computer science, artificial intelligence, operations research. Genetic algorithm is another kind of bio-inspired optimization method and it is playing an increasingly important role in studies of complex adaptive systems. Its application ranges from adaptive agents in economic theory to the use of machine learning techniques in the design of complex devices and structures, such as aircraft turbines and integrated circuits [2]. Optimization of structures can be classified into three categories: sizing, shaping, and topology optimization. In the topology optimization, it is concerned with the structure members and connectivity between members. In general, it is easily represented by discrete variables rather than by those used for continuous optimization problems. Topology optimization is the most difficult and complex among three categories and it is special useful in developing innovative conceptual designs. Structural optimization, in particular the topology optimization, has been identified as one of the most challenging tasks in structural design. Various techniques and approaches have been established during the last two decades. Topology optimization usually referred to as layout optimization or general shape optimization [3]. It lets engineers get the optimal topology of structure or new configurations during product design phase, as they are implementing the design of the size

This article proposes an efficient parameterized level set method (PLSM) for structural topology optimization design with minimum compliance as the objective function and volume fraction as the constraint condition. In the stage of establishing the optimization model, the level set function (LSF) is interpolated using compactly-supported radial basis functions (CS-RBFs) to transform the Hamilton-Jacobi partial differential equation (PDE) into ordinary differential equations (ODEs), thereby making the evolution of the LSF more convenient and efficient, and ensuring the smoothness of the optimization result boundary. The method of moving asymptotes (MMA) is used for solving the established optimization model, and meanwhile the shape sensitivity constraint factor is added to improve computational efficiency. During the evolution of the LSF, an approximate re-initialization scheme is employed to prevent the gradient of the LSF boundary from being too large or too small, thereby improving the numerical stability and the convergence speed of structural topology optimization process. Furthermore, the proposed method is also extensible and applicable to topology optimization of multi-material structures. The feasibility and effectiveness of this method have been verified through several typical numerical examples involving topology optimization of single-material structures and multi-material structures within the framework of minimum compliance design. HIGHLIGHTS An efficient parameterized level set method using the approximate re-initialization scheme is proposed for structural topology optimization. The approximate re-initialization scheme is employed when solving the parameterized level set function via the MMA algorithm. This scheme can prevents the gradient of the level set function boundary from being too large or too small, making the level set function update more stable and accelerating the convergence speed of structural topology optimization. The effectiveness and feasibility of the proposed method are demonstrated through examples of single-material and multi-material structural topology optimization.

Isogeometric analysis (IGA) connects CAE with standard CAD design tools and has been utilized for a decade in structural optimization. FEA has a number of drawbacks, including a lack of linkage between analytic and geometric models, a shortage of continuity between components, and a lack of accuracy for high-order elements. Isogeometric analysis effectively overcomes these obstacles. This paper proposes the isogeometric topological optimization mathematical model depending on the asymmetric constitutive relationship of tension and compression microscopic materials. We provide a new density-based topology optimization formulation in which the design domain is limited to the B-spline space. A rectangular domain with a tensor-product is embedded in a design domain that is arbitrarily shaped. The density field is represented using B-splines. The intrinsic filter provided by the B-spline representation for topology optimization is governed by the degrees of B-spline and the knot spans. This B-spline effectively removes numerical artifacts and controls the minimum feature-length in; when the B-spline basis functions span many analysis elements. Benchmark problems in structural topology optimization are computed through Evolutionary Structural Optimization (ESO) algorithm. Comparisons of the optimal structure topologies using finite element analysis and isogeometric collocation methods are analyzed. The influence of different tension-compression stiffness ratios on the final structure topologies is listed and analyzed. The numerical results show the reliability and performance of the proposed mathematical formulation and asymmetry of natural structure.

Bi-directional evolutionary topology optimization of continuum structures subjected to inertial loads

Dimension reduction and surrogate based topology optimization of periodic structures

According to the requirements of the aerospace industry for high strength, high stiffness, and lightweight structural parts, topology optimization has been proved to be an effective product design method. As one of the most conceptual and prospective structural optimization design methods, topology optimization intends to seek the optimal layout of materials in an allowed design region under a given load and boundary conditions. Thus, the object of study in the article is the method of topological optimization of aircraft structures. The goal of this article is to analyze the existing approaches, algorithms, as well as application of the method of topological optimization in the aerospace field in applied problems. The tasks are to describe the existing various approaches methods, features, and research directions of topological optimization as well as to study the possibility of application in the manufacturing process of composite structures. The following results were obtained. The optimization methods are briefly explained and compared, and the advantages and limitations of each approach are discussed. The various ways of simultaneous optimization of fiber orientation and structural topology were described and analyzed. The features of different methods of continuous fiber orientation optimization method were reviewed. The discrete fiber orientation optimization methods were represented. The possibility of multi-scale concurrent topological optimization was described. The combination of topology optimization and additive manufacturing was considered. Finally, the topology optimization of FRC structures which have been resolved in literature are reviewed and the potential research fields requiring more investigation are pointed out. Conclusions. In the article, a comprehensive review of the topology optimization design of FRC structures was presented. The promising way is to combine topology optimization with additive manufacturing techniques. However, these proposed methods may not suitable for other more complex problems, such as bucking stability and natural frequency. Hence, the topology optimization design of complex FRC components under complicated conditions is the main challenge in the future. This can be a new trend in the topology design of FRC structures.

Structural topology optimization has gained widespread attention due to more possibilities of innovative structural design. The current research focus/hotspots, application areas, main research scholars, institutions and the countries involved in structural topology optimization are visually presented through clustering and visual analysis based on CiteSpace. The four metric dimensions of the literatures in this paper are as follows: annual quantity of papers and core countries, core authors and co-authors’ institutions, hotspots and burst terms, and the highly co-cited papers. The results show the research hotspots in this field are concentrated on keywords such as "level set method", "sensitivity analysis", "homogenization", "genetic algorithm", etc. Regarding the research frontier, “moving morphable component (MMC)”, “additive manufacturing (AM)” and “deep learning” are hot topics. In addition, Y. Sui, Z. Kang and O. Sigmund, etc. have high publications. M. Bendsøe and O. Sigmund have high citations. Dalian University of Technology, Technical University of Denmark, etc. are prominent institutions. Moreover, China accounts for more than 34% in the terms of original WOS literatures following by the USA and Australia. This paper could identify structural topology optimization development patterns for the scholars concerned with this field, especially novices, to quickly focus and track the research priorities.

This thesis aims at understanding and improving topology optimization techniques focusing on density-based level-set methods and geometrical nonlinearities. Central in this work are the numerical modeling of the mechanical response of a design and the consistency of the optimization process itself. Concerning the first topic, we investigate different means to improve the robustness of density-based numerical models including geometrical nonlinearities. The conventional approach (scaling the local material properties) can result in convergence problems due to excessive deformation in low-stiffness finite elements. To avoid excessive deformation, we combine the element connectivity parameterization method (adapting the connectivity between finite elements) with level-set-based topology optimization. Furthermore, we achieve greater robustness of analysis method using a second and improved approach called element deformation scaling. This approach eliminates the need for solving internal equilibrium equations (needed for the element connectivity parameterization method) via an explicit relation between the local internal and global external displacement field. The second focus of this thesis is on the optimization process of level-set-based topology optimization, and in particular its numerical consistency. We observe that signed-distance reinitialization of the level-set function affects the shape of a design in the optimization process. To minimize this effect, we propose a discrete level-set method that is based on an approximate Heaviside function and focusing on the implementation. Furthermore, we also propose a level-set-based topology optimization method using an exact Heaviside function and mathematical programming that effectively eliminates the need for reinitialization. We demonstrate that our density-based level-set method is closely related to conventional density-based topology optimization methods, while offering the advantage of more control over the geometrical complexity. On the other hand, we confirm that the dependence of the final result on the initial design which remains one of the big challenges for level-set-based topology optimization. The potential of the proposed level-set method is shown by applying it on problems with stress constraints and geometrical nonlinearities and performing manufacturing tolerant topology optimization. Finally, this thesis offers a review of level-set methods for structural topology optimization to identify and discuss the different approaches that are available in literature. We can distinguish between level-set methods by examination of their design parameterization, sensitivities, update procedures and regularization techniques. A level-set-based design parameterization offers the advantage of a crisp distinction between subdomains. For this reason, X-FEM approaches and conforming discretizations are an interesting option to retain the crisp nature of the level-set-based description of the design. Many level-set methods are combined with density-based numerical models and are, therefore, closely related to conventional density-based topology optimization methods. In particular, recently proposed projection methods have much in common with a level-set-based design description. The results of level-set-based TO methods often rely heavily on regularization techniques that introduce inconsistencies in the optimization process. Numerical consistency does not necessarily lead to the best search direction, but is essential to find a Karush-Kuhn-Tucker point of the discretized optimization problem.

Discrete ground structure topology optimization design methods have to date received considerable attention in structural engineering. An alternative class of structural topology optimization methods, which have not yet received much attention in structural engineering, but which have undergone considerable development in the past decade, are the so-called continuum formulations. In this work, a continuum structural topology optimization formulation is presented and applied to the concept design optimization of structural bracing systems that are needed to stiffen tall structures against sidesway under lateral-wind and seismic-type loading. Although demonstrated here in the context of these specific design examples, continuum structural topology optimization methods are believed to hold potential as a design tool for a wide range of civil engineering type structures. A variety of continuum topology design formulations, including static compliance minimization and eigenvalue optimization, are explored, and solution parameters are varied to show that a number of design possibilities can be realized as solutions.

The performance of composite structures can be dramatically improved through the synergy between different constituent materials. However, the topology optimization of multi-material structures poses a heavy computational burden, which becomes more significant when load uncertainty is considered. This article proposes an efficient method to address the problem of robust topology optimization of multi-material structures. Employing the property that the material-field series-expansion method can significantly reduce the number of design variables, the proposed method improves the computational efficiency of the robust optimization problem. Meanwhile, the modification of the original multi-material interpolation model improves the quality of the optimized designs. Monte Carlo simulation is used to treat the load uncertainty, but it is decoupled from the optimization process based on linear elasticity theory to reduce computation cost. The effectiveness of the proposed method is demonstrated by numerical examples, which show that robust design results can be efficiently generated by this method.

Stress-based topology optimization and nonlinear structural topology optimization is gaining increasing attention in order to make topology optimization more realistic. Thus, this paper extends current concepts of topology optimization to the design of structures made of nonlinear materials. An extended bi-directional evolutionary structural optimization (BESO) method for stress minimization topology optimization of material nonlinear structures is proposed in this work. BESO method based on discrete variables can effectively avoid the well-known singularity problem in density-based methods with low-density elements. The maximum von Mises stress is approximated by the p-norm global stress. The sensitivity information for designing variable updates is derived in detail by adjoint method. As for the highly nonlinear stress behavior, the updated scheme takes advantages from two filters respectively of the sensitivity and topological variables to improve convergence. Moreover, the filtered sensitivity numbers are combined with their historical sensitivity information to further stabilize the optimization process. The effectiveness of the proposed method is demonstrated by several 2D benchmark design problems.

Research on topology optimization mainly deals with the design of monoscale structures, which are usually made of homogeneous materials. Recent advances of multiscale structural modeling enables the consideration of microscale material heterogeneities and constituent nonlinearities when assessing the macroscale structural performance. However, due to the modeling complexity and the expensive computing requirement of multiscale modeling, there has been very limited research on topology optimization of multiscale nonlinear structures. This paper reviews firstly recent advances made by the authors on topology optimization of multiscale nonlinear structures, in particular techniques regarding to nonlinear topology optimization and computational homogenization (also known as FE2) are summarized. Then the conventional concurrent material and structure topology optimization design approaches are reviewed and compared with a recently proposed FE2-based design approach, which treats the microscale topology optimization process integrally as a generalized nonlinear constitutive behavior. In addition, discussions on the use of model reduction techniques is provided in regard to the prohibitive computational cost.