Toward Deep Learning Software Repositories

PurposeTo conduct a head-to-head comparison between deep learning (DL) and radiomics models across institutions for predicting microvascular invasion (MVI) in hepatocellular carcinoma (HCC) and to investigate the model robustness and generalizability through rigorous internal and external validation.MethodsThis retrospective study included 2304 preoperative images of 576 HCC lesions from two centers, with MVI status determined by postoperative histopathology. We developed DL and radiomics models for predicting the presence of MVI using B-mode ultrasound, contrast-enhanced ultrasound (CEUS) at the arterial, portal, and delayed phases, and a combined modality (B + CEUS). For radiomics, we constructed models with enlarged vs. original regions of interest (ROIs). A cross-validation approach was performed by training models on one center’s dataset and validating the other, and vice versa. This allowed assessment of the validity of different ultrasound modalities and the cross-center robustness of the models. The optimal model combined with alpha-fetoprotein (AFP) was also validated. The head-to-head comparison was based on the area under the receiver operating characteristic curve (AUC).ResultsThirteen DL models and 25 radiomics models using different ultrasound modalities were constructed and compared. B + CEUS was the optimal modality for both DL and radiomics models. The DL model achieved AUCs of 0.802–0.818 internally and 0.667–0.688 externally across the two centers, whereas radiomics achieved AUCs of 0.749–0.869 internally and 0.646–0.697 externally. The radiomics models showed overall improvement with enlarged ROIs (P < 0.05 for both CEUS and B + CEUS modalities). The DL models showed good cross-institutional robustness (P > 0.05 for all modalities, 1.6–2.1% differences in AUC for the optimal modality), whereas the radiomics models had relatively limited robustness across the two centers (12% drop-off in AUC for the optimal modality). Adding AFP improved the DL models (P < 0.05 externally) and well maintained the robustness, but did not benefit the radiomics model (P > 0.05).ConclusionCross-institutional validation indicated that DL demonstrated better robustness than radiomics for preoperative MVI prediction in patients with HCC, representing a promising solution to non-standardized ultrasound examination procedures.

COVID-19 is highly infectious and causes acute respiratory disease. Machine learning (ML) and deep learning (DL) models are vital in detecting disease from computerized chest tomography (CT) scans. The DL models outperformed the ML models. For COVID-19 detection from CT scan images, DL models are used as end-to-end models. Thus, the performance of the model is evaluated for the quality of the extracted feature and classification accuracy. There are four contributions included in this work. First, this research is motivated by studying the quality of the extracted feature from the DL by feeding these extracted to an ML model. In other words, we proposed comparing the end-to-end DL model performance against the approach of using DL for feature extraction and ML for the classification of COVID-19 CT scan images. Second, we proposed studying the effect of fusing extracted features from image descriptors, e.g., Scale-Invariant Feature Transform (SIFT), with extracted features from DL models. Third, we proposed a new Convolutional Neural Network (CNN) to be trained from scratch and then compared to the deep transfer learning on the same classification problem. Finally, we studied the performance gap between classic ML models against ensemble learning models. The proposed framework is evaluated using a CT dataset, where the obtained results are evaluated using five different metrics The obtained results revealed that using the proposed CNN model is better than using the well-known DL model for the purpose of feature extraction. Moreover, using a DL model for feature extraction and an ML model for the classification task achieved better results in comparison to using an end-to-end DL model for detecting COVID-19 CT scan images. Of note, the accuracy rate of the former method improved by using ensemble learning models instead of the classic ML models. The proposed method achieved the best accuracy rate of 99.39%.

Abstract. To Electronic health records (EHRs) are a treasure trove of patient information, including clinical notes. However, extracting meaningful insights from these unstructured narratives remains a challenge. This paper explores the potential of natural language processing (NLP) and deep learning to unlock the rich clinical narrative data and revolutionize healthcare. Clinical notes capture a wealth of information beyond structured data points. They document patient history, symptoms, treatment progress, and physician observations. Analyzing this narrative unlocks a deeper understanding of a patient's health journey, aiding in NLP can identify subtle patterns in language usage that might be indicative of specific diseases. This can assist clinicians in arriving at more accurate diagnoses, particularly for complex cases. Deep learning models can analyze narratives to identify patients at higher risk of developing certain conditions. This allows for proactive interventions and preventative measures. Extracting details about a patient's lifestyle, social context, and emotional well-being from narratives can facilitate the development of personalized treatment plans that cater to individual needs. NLP techniques like named entity recognition, sentiment analysis, and topic modeling enable the extraction of key clinical entities, emotions, and themes from narratives. Deep learning, with its ability to learn complex relationships in text data, empowers NLP tasks. Deep learning models can be trained on massive datasets of clinical notes, achieving superior performance in tasks like information extraction compared to traditional NLP methods. Deep learning models can handle the vast amount of text data generated in healthcare settings, enabling large- scale analysis of clinical narratives. By learning from diverse patient populations, deep learning models can improve their generalizability and adapt to variations in language usage within clinical documentation. Integrating NLP and deep learning into clinical workflows promises a future where the patient narrative is not just documented but actively analyzed to inform better healthcare decisions. This can lead to earlier diagnoses, more effective treatments, and ultimately, improved patient outcomes. By addressing the challenges and fostering responsible development, we can unlock the true potential of clinical narratives and empower a new era of data-driven healthcare.

Context:Deep learning (DL) techniques have gained significant popularity among software engineering (SE) researchers in recent years. This is because they can often solve many SE challenges without enormous manual feature engineering effort and complex domain knowledge.Objective:Although many DL studies have reported substantial advantages over other state-of-the-art models on effectiveness, they often ignore two factors:(1) reproducibility—whether the reported experimental results can be obtained by other researchers using authors’ artifacts (i.e., source code and datasets) with the same experimental setup; and(2) replicability—whether the reported experimental result can be obtained by other researchers using their re-implemented artifacts with a different experimental setup. We observed that DL studies commonly overlook these two factors and declare them as minor threats or leave them for future work. This is mainly due to high model complexity with many manually set parameters and the time-consuming optimization process, unlike classical supervised machine learning (ML) methods (e.g., random forest). This study aims to investigate the urgency and importance of reproducibility and replicability for DL studies on SE tasks.Method:In this study, we conducted a literature review on 147 DL studies recently published in 20 SE venues and 20 AI (Artificial Intelligence) venues to investigate these issues. We also re-ran four representative DL models in SE to investigate important factors that may strongly affect the reproducibility and replicability of a study.Results:Our statistics show the urgency of investigating these two factors in SE, where only 10.2% of the studies investigate any research question to show that their models can address at least one issue of replicability and/or reproducibility. More than 62.6% of the studies do not even share high-quality source code or complete data to support the reproducibility of their complex models. Meanwhile, our experimental results show the importance of reproducibility and replicability, where the reported performance of a DL model could not be reproduced for an unstable optimization process. Replicability could be substantially compromised if the model training is not convergent, or if performance is sensitive to the size of vocabulary and testing data.Conclusion:It is urgent for the SE community to provide a long-lasting link to a high-quality reproduction package, enhance DL-based solution stability and convergence, and avoid performance sensitivity on different sampled data.

Electricity load forecasting is a crucial undertaking within all the deregulated markets globally. Among the research challenges on a global scale, the investigation of deep transfer learning (DTL) in the field of electricity load forecasting represents a fundamental effort that can inform artificial intelligence applications in general. In this paper, a comprehensive study is reported regarding day-ahead electricity load forecasting. For this purpose, three sequence-to-sequence (Seq2seq) deep learning (DL) models are used, namely the multilayer perceptron (MLP), the convolutional neural network (CNN) and the ensemble learning model (ELM), which consists of the weighted combination of the outputs of MLP and CNN models. Also, the study focuses on the development of different forecasting strategies based on DTL, emphasizing the way the datasets are trained and fine-tuned for higher forecasting accuracy. In order to implement the forecasting strategies using deep learning models, load datasets from three Greek islands, Rhodes, Lesvos, and Chios, are used. The main purpose is to apply DTL for day-ahead predictions (1–24 h) for each month of the year for the Chios dataset after training and fine-tuning the models using the datasets of the three islands in various combinations. Four DTL strategies are illustrated. In the first strategy (DTL Case 1), each of the three DL models is trained using only the Lesvos dataset, while fine-tuning is performed on the dataset of Chios island, in order to create day-ahead predictions for the Chios load. In the second strategy (DTL Case 2), data from both Lesvos and Rhodes concurrently are used for the DL model training period, and fine-tuning is performed on the data from Chios. The third DTL strategy (DTL Case 3) involves the training of the DL models using the Lesvos dataset, and the testing period is performed directly on the Chios dataset without fine-tuning. The fourth strategy is a multi-task deep learning (MTDL) approach, which has been extensively studied in recent years. In MTDL, the three DL models are trained simultaneously on all three datasets and the final predictions are made on the unknown part of the dataset of Chios. The results obtained demonstrate that DTL can be applied with high efficiency for day-ahead load forecasting. Specifically, DTL Case 1 and 2 outperformed MTDL in terms of load prediction accuracy. Regarding the DL models, all three exhibit very high prediction accuracy, especially in the two cases with fine-tuning. The ELM excels compared to the single models. More specifically, for conducting day-ahead predictions, it is concluded that the MLP model presents the best monthly forecasts with MAPE values of 6.24% and 6.01% for the first two cases, the CNN model presents the best monthly forecasts with MAPE values of 5.57% and 5.60%, respectively, and the ELM model achieves the best monthly forecasts with MAPE values of 5.29% and 5.31%, respectively, indicating the very high accuracy it can achieve.

We developed a multimodal ultrasound (US) deep learning (DL) fusion model to automatically classify early fibrosis in patients with chronic kidney disease (CKD). This prospective study included patients with CKD who underwent continuous gray-scale US, superb microvascular imaging, and strain elastography from May to November 2022. According to the pathological tubular atrophy and interstitial fibrosis score, patients were divided into minimal and mild groups (affected area ≤10% and 11 − 25% of the total cortical volume, respectively). The dataset was divided into training (70%) and test (30%) sets. A DL model combining the features of the three US modes was developed to predict early fibrosis in patients with CKD. We compared these findings with the area under the receiver operating characteristic curve (AUC) of the clinical model by analyzing the receiver operating characteristic curve in the test set. The AUC of single-mode DL based on gray-scale US, superb microvascular imaging, and strain elastography was 0.682, 0.745, and 0.648, respectively, while that of the multimodal US DL model was 0.86. The accuracy, specificity, and sensitivity of the multimodal US DL model were 0.779, 0.767, and 0.796, respectively, and the negative and positive predictive values were 0.842 and 0.706, respectively. The AUC of the multimodal US DL model was significantly better than that of the single-mode DL and clinical models. The DL algorithm developed using multimodal US images can effectively predict early fibrosis in patients with CKD with significantly greater accuracy than single-mode DL or clinical models.

We aimed at comparing intratumoral and peritumoral deep learning, radiomics, and fusion models in predicting KRAS mutations in rectal cancer using endorectal ultrasound imaging. This study included 304 patients with rectal cancer from Fujian Medical University Union Hospital. The patients were randomly divided into a training group (213 patients) and a test group (91 patients) at a 7:3 ratio. Radiomics and deep learning models were established using primary tumor and peritumoral images. In the optimally performing regions-of-interest, two fusion strategies, a feature-based and a decision-based model, were employed to build the fusion models. The Shapley additive explanation (SHAP) method was used to evaluate the significance of features in the optimal radiomics, deep learning, and fusion models. The performance of each model was assessed using the area under the receiver operating characteristic curve (AUC) and decision curve analysis (DCA). In the test cohort, both the radiomics and deep learning models exhibited optimal performance with a 10-pixel patch extension, yielding AUC values of 0.824 and 0.856, respectively. The feature-based DLRexpand10_FB model attained the highest AUC (0.896) across all study sets. In addition, the DLRexpand10_FB model demonstrated excellent sensitivity, specificity, and DCA. SHAP analysis underscored the deep learning feature (DL_1) as the most significant factor in the hybrid model. The feature-based fusion model DLRexpand10_FB can be employed to predict KRAS gene mutations based on pretreatment endorectal ultrasound images of rectal cancer. The integration of peritumoral regions enhanced the predictive performance of both the radiomics and deep learning models.

Deep learning breast cancer risk models demonstrate improved accuracy compared with traditional risk models but have not been prospectively tested. We compared the accuracy of a deep learning risk score derived from the patient's prior mammogram to traditional risk scores to prospectively identify patients with cancer in a cohort due for screening. We collected data on 119 139 bilateral screening mammograms in 57 617 consecutive patients screened at 5 facilities between September 18, 2017, and February 1, 2021. Patient demographics were retrieved from electronic medical records, cancer outcomes determined through regional tumor registry linkage, and comparisons made across risk models using Wilcoxon and Pearson χ2 2-sided tests. Deep learning, Tyrer-Cuzick, and National Cancer Institute Breast Cancer Risk Assessment Tool (NCI BCRAT) risk models were compared with respect to performance metrics and area under the receiver operating characteristic curves. Cancers detected per thousand patients screened were higher in patients at increased risk by the deep learning model (8.6, 95% confidence interval [CI] = 7.9 to 9.4) compared with Tyrer-Cuzick (4.4, 95% CI = 3.9 to 4.9) and NCI BCRAT (3.8, 95% CI = 3.3 to 4.3) models (P &lt; .001). Area under the receiver operating characteristic curves of the deep learning model (0.68, 95% CI = 0.66 to 0.70) was higher compared with Tyrer-Cuzick (0.57, 95% CI = 0.54 to 0.60) and NCI BCRAT (0.57, 95% CI = 0.54 to 0.60) models. Simulated screening of the top 50th percentile risk by the deep learning model captured statistically significantly more patients with cancer compared with Tyrer-Cuzick and NCI BCRAT models (P &lt; .001). A deep learning model to assess breast cancer risk can support feasible and effective risk-based screening and is superior to traditional models to identify patients destined to develop cancer in large screening cohorts.

The past few years have seen a surge of applying Deep Learning (DL) models for a wide array of tasks such as image classification, object detection, machine translation, etc. While DL models provide an opportunity to solve otherwise intractable tasks, their adoption relies on them being optimized to meet latency and resource requirements. Benchmarking is a key step in this process but has been hampered in part due to the lack of representative and up-to-date benchmarking suites. This is exacerbated by the fast-evolving pace of DL models. This paper proposes DLBricks, a composable benchmark generation design that reduces the effort of developing, maintaining, and running DL benchmarks on CPUs. DLBricks decomposes DL models into a set of unique runnable networks and constructs the original model's performance using the performance of the generated benchmarks. DLBricks leverages two key observations: DL layers are the performance building blocks of DL models and layers are extensively repeated within and across DL models. Since benchmarks are generated automatically and the benchmarking time is minimized, DLBricks can keep up-to-date with the latest proposed models, relieving the pressure of selecting representative DL models. Moreover, DLBricks allows users to represent proprietary models within benchmark suites. We evaluate DLBricks using $50$ MXNet models spanning $5$ DL tasks on $4$ representative CPU systems. We show that DLBricks provides an accurate performance estimate for the DL models and reduces the benchmarking time across systems (e.g. within $95\%$ accuracy and up to $4.4\times$ benchmarking time speedup on Amazon EC2 c5.xlarge).

Sentiment analysis is a subfield of Natural Language Processing (NLP) which tries to process a text to extract opinions or attitudes towards topics or entities. Recently, the use of deep learning methods for sentiment analysis has received noticeable attention from researchers. Generally, different deep learning methods have shown superb performance in sentiment analysis problem. However, deep learning models are different in nature and have different strengths and limitations. For example, convolutional neural networks are useful for extracting local structures from data, while recurrent models are able to learn order dependence in sequential data. In order to combine the advantages of different deep models, in this paper we have proposed a novel approach for aspect-based sentiment analysis which utilizes deep ensemble learning. In the proposed method, we first build four deep learning models, namely CNN, LSTM, BiLSTM and GRU. Then the outputs of these models are combined using stacking ensemble approach where we have used logistic regression as meta-learner. The results of applying the proposed method on the real datasets show that our method has increased the accuracy of aspect-based prediction by 5% to 20% compared to the basic deep learning methods.

To develop and evaluate static ultrasound images of ovaries-based radiomics and deep learning models for predicting antral follicle count (AFC) and anti-Müllerian hormone (AMH). A retrospective analysis was performed on 395 infertility patients who completed AFC through transvaginal ultrasonography and AMH test in two branches of the hospital. The data set was divided into training cohort (n = 210, Branch A), internal test cohort (n = 91, Branch A), and external test cohort (n = 94, Branch B). The AFC results of static ultrasound images (AFCstatic) and dynamic scan (AFCdynamic) were analysed for correlation and consistency. The radiomics, deep learning and combined models (Rad-DL model) were developed to quantitatively predict AFC and AMH respectively, and the ordered 3-class classification (AFCdynamic≤5,6≤AFCdynamic≤19 and 20≤AFCdynamic) prediction was further carried out. There was a high degree of correlation and consistency between AFCstatic and AFCdynamic in both branches. In the quantitative prediction of AFCdynamic, the R2 of the radiomics, deep learning and Rad-DL models in the external test cohort were 0.572, 0.541, 0.583, respectively. In the quantitative prediction of AMH, the R2 of the radiomics, deep learning and Rad-DL models in the external test cohort were 0.420, 0.352, 0.509, respectively. For the ordered 3-class classification prediction, the radiomics, deep learning and Rad-DL models demonstrated a good discrimination performance with overall AUCs of 0.816 (95%CI, 0.747–0.887), 0.843 (95%CI, 0.772–0.901), and 0.881 (95%CI, 0.816–0.931) in the external test cohort, respectively. Radiomics and deep learning models developed by using static ultrasound images of ovaries may quantitatively predict AFCdynamic to a certain extent, and accurately screen infertility patients with different ovarian reserve levels. This study lays the foundation for further break through the rigid antral follicle count and explore an intelligent non-invasive ovarian reserve evaluation method.

This study aims to develop and validate an interpretable deep learning (DL) model and a nomogram based on endoscopic ultrasound (EUS) images for the prediction of pathological grading in pancreatic neuroendocrine tumors (PNETs). This multicenter retrospective study included 108 patients with PNETs, who were divided into train (n = 81, internal center) and test cohorts (n = 27, external centers). Univariate and multivariate logistic regression were used for screening demographic characteristics and EUS semantic features. Deep transfer learning was employed using a pre-trained ResNet18 model to extract features from EUS images. Feature selection was conducted using the least absolute shrinkage and selection operator (LASSO), and various machine learning algorithms were utilized to construct DL models. The optimal model was then integrated with clinical features to develop a nomogram. The performance of the model was assessed using the area under the curve (AUC), calibration curves, decision curve analysis (DCA), and clinical impact curves (CIC). The nomogram, which integrates the optimal DL model (Naive Bayes) with clinical features, achieved AUC values of 0.928 (95% CI 0.849–0.981) in the train cohort and 0.882 (95% CI 0.778–0.954) in the test cohort. Calibration curves revealed minimal discrepancies between predicted and actual probabilities, with mean absolute errors of 4.5% and 6.6% in the train and test cohorts, respectively. DCA and CIC demonstrated substantial net benefit and clinical utility. The SHapley Additive exPlanations (SHAP) method provided insights into the contribution of each DL feature to the model’s predictions. This study developed and validated a novel interpretable DL model and nomogram using EUS images and machine learning, which holds promise for enhancing the clinical application of EUS in identifying PNETs’ pathological grading.

Research in many fields has shown that transfer learning (TL) is well-suited to improve the performance of deep learning (DL) models in datasets with small numbers of samples. This empirical success has triggered interest in the application of TL to cognitive decoding analyses with functional neuroimaging data. Here, we systematically evaluate TL for the application of DL models to the decoding of cognitive states (e.g., viewing images of faces or houses) from whole-brain functional Magnetic Resonance Imaging (fMRI) data. We first pre-train two DL architectures on a large, public fMRI dataset and subsequently evaluate their performance in an independent experimental task and a fully independent dataset. The pre-trained DL models consistently achieve higher decoding accuracies and generally require less training time and data than model variants that were not pre-trained, while also outperforming linear baseline models trained from scratch, clearly underlining the benefits of pre-training. We demonstrate that these benefits arise from the ability of the pre-trained models to reuse many of their learned features when training with new data, providing deeper insights into the mechanisms giving rise to the benefits of pre-training. Yet, we also surface nuanced challenges for whole-brain cognitive decoding with DL models when interpreting the decoding decisions of the pre-trained models, as these have learned to utilize the fMRI data in unforeseen and counterintuitive ways to identify individual cognitive states.

Artificial intelligence and recent advances in deep learning architectures, including transformer networks and large language models, change the way people think and act to solve problems. Software engineering, as an increasingly complex process to design, develop, test, deploy, and maintain large-scale software systems for solving real-world challenges, is profoundly affected by many revolutionary artificial intelligence tools in general and machine learning in particular. In this roadmap for artificial intelligence in software engineering, we highlight the recent deep impact of artificial intelligence on software engineering by discussing successful stories of applications of artificial intelligence to classic and new software development challenges. We identify the new challenges that the software engineering community has to address in the coming years to successfully apply artificial intelligence in software engineering, and we share our research roadmap toward the effective use of artificial intelligence in the software engineering profession, while still protecting fundamental human values. We spotlight three main areas that challenge the research in software engineering: the use of generative artificial intelligence and large language models for engineering large software systems, the need of large and unbiased datasets and benchmarks for training and evaluating deep learning and large language models for software engineering, and the need of a new code of digital ethics to apply artificial intelligence in software engineering.

Fake news is a growing problem on social media and can have significant negative consequences for individuals and society owing to its accessibility, low cost, and quick distribution. It is difficult to automatically identify bogus news that defies the current content-based analysis techniques. One of the key reasons is that current NLP algorithms still lack common sense, which is frequently necessary for understanding how to read the news. Recent research has demonstrated that the propagation patterns of true and fake news differ on social media. With the potential for automatic fake news detection, this study investigates the use of Deep Learning (DL) models to detect fake news on social media. A Neural Network (NN) model was developed using Natural Language Toolkit (NLTK), TensorFlow, and Natural Language Processing (NLP) for textual analysis. The model was trained on a dataset of fake and real news articles, and was able to achieve high accuracy in identifying fake news. The results of this study suggest that DL models can be valuable tools for detecting fake news on social media.