• Home
  • Search
  • Transformational Solid Oxide Fuel Cell (SOFC) Technology
  • https://doi.org/10.2172/1854102Copy DOI Icon

Transformational Solid Oxide Fuel Cell (SOFC) Technology

  • Jan 30, 2022
  • Hossein Ghezel-Ayagh
Show More
  • Abstract
  • Literature Map
  • Similar Papers
Abstract

This project was conducted under the Co-operative Agreement No. DE-FE0027584 with the US Department Energy to developed advanced Solid Oxide Fuel Cell (SOFC) Technologies. The overall objective of this project was to advance SOFC technology at the cell and stack level to enhance cell robustness and durability, increase performance, and reduce balance-of-plant (BOP) requirements. By reducing system complexity combined with the increases in power density and efficiency, the ultimate goal of the project was to increased reliability and to reduce capital and operating costs of installed systems. The project was focused on pathways that will reduce the cost of the SOFC cell and stack, including the following areas: Robust, redox tolerant cell technology Lower cost cell manufacturing through advances in cell design, which will reduce the amount of material, energy and time used in the fabrication of SOFCs High performance, low temperature electrolyte based on improvement of established materials Innovative SOFC stack architecture which truly integrates Balance of Plant functionality into the stack level design Thermal management of the fuel cell stack for increased durability and expanded window of operation Novel stack design amenable for use in sub-MW to multi-MW-scale power plants and having low replacement cost The incorporation of balance-of-plant (BOP) equipment into the stack platform increased the economic viability of smaller scale systems. The project objectives were met by a multi-prong approach, including new cell design complemented with modifications to existing cell technology, as well as a new stack design incorporating components typically included in the BOP, such as heat exchangers, oxidizer, fuel reformers, and recycle systems. The project culminated with demonstration of a stack test validating the viability of the cell and stack improvements. A cost model was also developed to estimate costs for the advanced stack technology at high volume manufacturing levels. The net outcome of the project is SOFC cell and stack technology with costs significantly below current DOE targets without compromising and, in some cases, improving on the performance and degradation rate demonstrated with the current state-of-the-art stack design. The results of this project advanced the reliability, robustness, and endurance of low-cost SOFC technology that ultimately are ready to be deployed in coal power systems with greater than 60 percent efficiency (based on higher heating value of fuel) and the capability for ≥97% CO2 capture at a cost-of-electricity that is approximately 40 percent below presently available Integrated Gasification Combined Cycle systems.

Similar Papers
  • Research Article

Production and Reliability Oriented SOFC Cell and Stack Design

  • Jul 01, 2017
  • Electrochemical Society Meeting Abstracts
  • Martin Hauth +20
  • Research Article

Additive Manufacturing of Solid Oxide Fuel Cell (AM-SOFC) Stacks

  • Nov 23, 2020
  • Electrochemical Society Meeting Abstracts
  • Feng Zhao +2
  • Research Article
  • Citations14

Recent developments in control and integration of solid oxide fuel cells: From stack to system

  • Nov 01, 2025
  • Renewable and Sustainable Energy Reviews
  • Xinyu Lu +2
  • Conference Article
  • Citations65

Solid Oxide Fuel Cell Auxiliary Power Unit - A Development Update

  • Mar 04, 2002
  • SAE technical papers on CD-ROM/SAE technical paper series
  • James Zizelman +2
  • Conference Article
  • Citations3

Development of In-Situ Mechanical Testing Method for SOFC Components

  • Jan 01, 2010
  • Satoshi Watanabe +7
  • Research Article
  • Citations1

Thin film Si solar cell and solid oxide fuel cell technologies for a low cost, environmentally friendly and sustainable source of energy

  • Oct 24, 2023
  • Journal of Renewable Energies
  • Amine Boudghene Stambouli +1
  • Research Article
  • Citations10

Comparing the Expected Stack Cost of Next Generation Intermediate Temperature Protonic Ceramic Fuel Cells with Solid Oxide Fuel Cell Technology

  • May 30, 2017
  • Electrochemical Society Transactions
  • Alexis Dubois +2
  • Research Article
  • Citations9

Modelling and Simulation of a Biomass Gasification-solid Oxide Fuel Cell Combined Heat and Power Plant using Aspen Plus

  • Jul 01, 2009
  • ARROW@Dublin Institute of Technology (Dublin Institute of Technology)
  • Wayne Doherty +2
  • Research Article
  • Citations20

Exergoeconomic evaluation of an ethanol-fueled solid oxide fuel cell power plant

  • Nov 06, 2015
  • Energy
  • Yannay Casas Ledón +3
  • PDF
  • Research Article
  • Citations9

Multiphysics Field Distribution Characteristics within the One-Cell Solid Oxide Fuel Cell Stack with Typical Interdigitated Flow Channels

  • Mar 20, 2019
  • Applied Sciences
  • Yu Xu +3
  • Research Article
  • Citations20

Performance analysis of methanol-fueled solid oxide fuel cell system incorporated with palladium membrane reactor

  • Jun 29, 2007
  • Chemical Engineering Journal
  • W Sangtongkitcharoen +4
  • Research Article
  • Citations1427

Advances in solid oxide fuel cell technology

  • Nov 01, 2000
  • Solid State Ionics
  • S.C Singhal
  • Research Article
  • Citations1

Diffuser shaped fuel channel design study in solid oxide fuel cell stacks.

  • Apr 23, 2017
  • Institut International du Froid
  • S Lee +2
  • Research Article

ChemInform Abstract: Advances in Cathode Materials for Solid Oxide Fuel Cells: Complex Oxides Without Alkaline Earth Metal Elements

  • Jun 01, 2016
  • ChemInform
  • Yubo Chen +6
  • Research Article
  • Citations245

Thermodynamic model and parametric analysis of a tubular SOFC module

  • Oct 30, 2000
  • Journal of Power Sources
  • Stefano Campanari
Cactus Communications logo

Copyright 2026 Cactus Communications. All rights reserved.