Transitions for Increased Flexibility in Fog Computing: A Case Study on Complex Event Processing

Goal of Complex Event Processing (CEP) is to identify meaningful events (such as opportunities or threats) and respond to them as quickly as possible. Traditional CEP frameworks do not have built-in security features. Any intruder may enter into the system and may send incorrect data to CEP engine. It causes to miss some patterns or it may lead to wrong prediction of patterns. Traditional CEP systems can be exploited through one or the other way. CEP system malfunctions when it is exploited. There is no built in procedure to check the health status of traditional CEP systems. Traditional CEP systems do not have procedures to take appropriate actions when system is affected or going to affect. When CEP system identifies some patterns, it will alert corresponding personnel about the occurrence of the event. Sometimes alert message may be undelivered or unnoticed by the corresponding people. Traditional CEP systems will not provide delivery assurance of alert message. These are few security challenges to existing CEP systems. In this paper Secure Complex Event Processing Framework is proposed to address above security challenges. Proposed framework is generic and it is pluggable into any existing CEP systems.

A Review on Fog Computing: Architecture, Fog with IoT, Algorithms and Research Challenges

Elderly population in the Asian countries is increasing at a very fast rate. Lack of healthcare resources and infrastructure in many countries makes the task of provding proper healthcare difficult. Internet of things (IoT) in healthcare can address the problem effectively. Patient care is possible at home using IoT devices. IoT devices are used to collect different types of data. Various algorithms may be used to analyse data. IoT devices are connected to the internet and all the data of the patients with various health reports are available online and hence security issues arise. IoT sensors, IoT communication technologies, IoT gadgets, components of IoT, IoT layers, cloud and fog computing, benefits of IoT, IoT-based algorithms, IoT security issues, and IoT challenges are discussed in the chapter. Nowadays global epidemic COVID19 has demolished the economy and health services of all the countries worldwide. Usefulness of IoT in COVID19-related issues is explained here.

With the rapid growth of Internet of Things (IoT) applications, the classic centralized cloud computing paradigm faces several challenges such as high latency, low capacity and network failure. To address these challenges, fog computing brings the cloud closer to IoT devices. The fog provides IoT data processing and storage locally at IoT devices instead of sending them to the cloud. In contrast to the cloud, the fog provides services with faster response and greater quality. Therefore, fog computing may be considered the best choice to enable the IoT to provide efficient and secure services for many IoT users. This paper presents the state-of-the-art of fog computing and its integration with the IoT by highlighting the benefits and implementation challenges. This review will also focus on the architecture of the fog and emerging IoT applications that will be improved by using the fog model. Finally, open issues and future research directions regarding fog computing and the IoT are discussed.

The Internet of Things (IoT) is a network of interconnected computing devices having the ability to transfer data over a network, without needing human interaction. Software and communication technologies have seen a tremendous amount of growth in the past couple of decades, and this has resulted in a significant increase in IoT devices. Today, in 2017, IoT devices are ubiquitous and have pervaded almost every sphere of our lives ushering an era of 'smart things.' The explosive growth has resulted in much security and privacy concerns. The other concern is the scalability issue with the primary model of analyzing IoT data in the cloud. A cloud-only model leads to network congestion, data bottleneck and slower reaction times to security issues. By selectively moving computation and storage closer to the network edge, fog computing provides an effective solution for these issues. This paper presents a holistic picture of IoT, its growth, fog computing, and Machine Learning (ML) techniques for securing IoT devices and fog computing systems. It surveys ML techniques for detecting abnormalities and attacks, illustrates solutions to the data growth in IoT, and dives into the security issues concerning fog computing. It also discusses future research directions in this important topic.

With the broader dissemination of digital technologies, visionary concepts like the Internet of Things also affect an increasing number of use cases with interfaces to humans, e.g. manufacturing environments with technical operators monitoring the processes. This leads to additional challenges, as besides the technical issues also human aspects have to be considered for a successful implementation of strategic initiatives like Industrie 4.0. From a technical perspective, complex event processing has proven itself in practice to be capable of integrating and analyzing huge amounts of heterogeneous data and establishing a basic level of situation awareness by detecting situations of interests. Whereas this reactive nature of complex event processing systems may be sufficient for machine-to-machine use cases, the new characteristic of application fields with humans remaining in the control loop leads to an increasing action distance and delayed reactions. Taking human aspects into consideration leads to new requirements, with transparency and comprehensibility of the processing of events being the most important ones. Improving the comprehensibility of complex event processing and extending its capabilities towards an effective support of human operators allows tackling technical and non-technical challenges at the same time. The main contribution of this thesis answers the question of how to evolve state-of-the-art complex event processing from its reactive nature towards a transparent and holistic situation management system. The goal is to improve the interaction among systems and humans in use cases with interfaces between both worlds. Realizing a holistic situation management requires three missing capabilities to be introduced by the contributions of this thesis: First, based on the achieved transparency, the retrospective analysis of situations is enabled by collecting information related to a situation's occurrence and development. Therefore, CEP engine-specific situation descriptions are transformed into a common model, allowing the automatic decomposition of the underlying patterns to derive partial patterns describing the intermediate states of processing. Second, by introducing the psychological model of situation awareness into complex event processing, human aspects of information processing are taken into consideration and introduced into the complex event processing paradigm. Based on this model, an extended situation life-cycle and transition method are derived. The introduced concepts and methods allow the implementation of the controlling function of situation management and enable the effective acquisition and maintenance of situation awareness for human operators to purposefully direct their attention towards upcoming situations. Finally, completing the set of capabilities for situation management, an approach is presented to support the generation and integration of prediction models for predictive situation management. Therefore, methods are introduced to automatically label and extract relevant data for the generation of prediction models and to enable the embedding of the resulting models for an automatic evaluation and execution. The contributions are introduced, applied and evaluated along a scenario from the manufacturing domain.

The rapid development of technology has made the Internet of Things an integral element of modern society. Modern Internet of Things’ implementations often use Fog computing, an offshoot of the Cloud computing that offers localized processing power at the network’s periphery. The Internet of Things serves as the inspiration for the decentralized solution known as Fog computing. Features such as distributed computing, low latency, location awareness, on-premise installation, and support for heterogeneous hardware are all facilitated by Fog computing. End-to-end security in the Internet of Things is challenging due to the wide variety of use cases and the disparate resource availability of participating entities. Due to their limited resources, it is out of the question to use complex cryptographic algorithms for this class of devices. All Internet of Things devices, even those connected to servers online, have constrained resources such as power and processing speed, so they would rather not deal with strict security measures. This paper initially examines distributed Fog computing and creates a new authentication framework to support the Internet of Things environment. The following authentication architecture is recommended for various Internet of Things applications, such as healthcare systems, transportation systems, smart buildings, smart energy, etc. The total effectiveness of the method is measured by considering factors such as the cost of communication and the storage overhead incurred by the offered integrated authentication protocol. It has been proven that the proposed technique will reduce communication costs by at least 11%.

With the rapid growth of Internet of Things (IoT) applications, fog computing enables the IoT to provide efficient services by extending the cloud computing paradigm to the edge of the network. However, the existing attribute-based encryption schemes rarely focus on user and attribute revocation in fog computing and most of them still impose high computational and storage overhead on resource-limited IoT devices. In this article, we propose an efficient attribute-based encryption outsourcing scheme with user and attribute revocation for fog-enabled IoT. The proposed scheme improves the existing encryption scheme that uses the concept of attribute groups to achieve attribute revocation, making it suitable for fog computing and improving the efficiency of ciphertext update. In addition, it implements a novel method of user revocation in fog computing based on the characteristics of fog computing. In order to reduce the computing and storage burden of IoT devices, the heavy computation operations of encryption and decryption are outsourced to fog nodes and part of secret keys are stored in fog nodes. The security analysis shows that the proposed scheme is secure under the Decisional Bilinear Diffie–Hellman (DBDH) assumption. The performance analysis shows that the proposed scheme has high revocation efficiency and is efficient enough to be deployed in practical fog computing.

As location-aware IoT (Internet of Things) devices intend to spread across almost every application, IoT devices are going to require different GNSS (Global Navigation Satellite System) receiver design requirements. To deliver on IoT opportunities, system architects and designers need to look carefully at every aspect of system design and architecture to be able to enable the full potential of the IoT era. IoT devices are equipped with different connectivity sensors that can provide a reliable integrated location-awareness solution. IoT devices are mainly relying on GNSS chip to deliver a service when no other RF signal is available. Hence, GNSS chip is expected to maintain a robust and reliable performance even in harsh environment. The harsh environment includes multipath environment, NLOS (Non-Line of Sight) GNSS signal reception, weak GNSS signal power reception, superimposed motion (e.g., arm swing, floating platform fluctuation …etc.), operation under freezing temperature, and interference. The targeted low-cost system design along with the expected harsh operational environment derived us to face exceptional GNSS signal reception condition. This paper discusses lessons learned, and challenges faced signal acquisition, reacquisition, and tracking for several IoT applications. Different operational modes are also explored to accommodate various use cases scenarios for several IoT applications. These different power consumption operational modes allow the GNSS chip to achieve an Ultra-low power consumption which indeed required for IoT applications. This paper provides an overview about the addressed GNSS chip fabricated in a 28nm FD-SOI process. We demonstrate a system performance and power consumption comparison of this chip along with other state-of-the-art GNSS chip. We compare the positioning performance for this device alongside another state-of-the-art GNSS modules and Novatel’s tightly coupled GNSS/INS (Inertial Navigation System) reference solution at numerous scenarios ranging from walking, running, and driving at several sites under different environment.

Complex Event Processing (CEP) systems extract interest situations from event flows based on event detection patterns. However, local event processing for distributed Internet of Things (IoT) has not been discussed yet. Besides, it is complex or impossible to discover such patterns in some applications of IoT. In this article, we design a complex event service to process event flows based on IoT resource models, which does not depend on existing patterns, and deals with both discrete events and continuous variables. To improve the CEP performance, local IoT resources are used for local event processing, and a lazy exchange method is designed to realize the collaborated event processing between network edges and a data center. Our evaluation shows that our solution is feasible and effective.

This study presents a novel method to develop kleene operators on a Binary Tree-Based Directed Graph (BTDG) to improve expressibility and performance of our developed complex event processing system. Complex Event Processing (CEP) systems are widely employed to notify opportunities and threats, which many of these situations are discovered through detection of multiple occurrences of the similar set of events. Many of CEP systems proposed kleene operators to detect these situations. The high expressibility of our implemented CEP system achieved by developing algorithms on kleene operator. These algorithms are designed on a BTDG as a unified basis to arrange input data and joining this input according to a given query. The performance is improved through directing events instantly to join with other events, dynamically switching to an optimal plan and late applying combination for kleene with specified size. The experiments shows kleene operator on BTDG brings rather high degree of expressiblity and performance in compare to its counterparts.

Complex event processing (CEP) systems have gained significant importance in various domains, such as finance, logistics, and security, where the real-time analysis of event streams is crucial. However, as the volume and complexity of event data continue to grow, optimizing the performance of CEP systems becomes a critical challenge. This paper investigates the impact of indexing strategies on the performance of databases handling complex event processing. We propose a novel indexing technique, called Hierarchical Temporal Indexing (HTI), specifically designed for the efficient processing of complex event queries. HTI leverages the temporal nature of event data and employs a multi-level indexing approach to optimize query execution. By combining temporal indexing with spatial- and attribute-based indexing, HTI aims to accelerate the retrieval and processing of relevant events, thereby improving overall query performance. In this study, we evaluate the effectiveness of HTI by implementing complex event queries on various CEP systems with different indexing strategies. We conduct a comprehensive performance analysis, measuring the query execution times and resource utilization (CPU, memory, etc.), and analyzing the execution plans and query optimization techniques employed by each system. Our experimental results demonstrate that the proposed HTI indexing strategy outperforms traditional indexing approaches, particularly for complex event queries involving temporal constraints and multi-dimensional event attributes. We provide insights into the strengths and weaknesses of each indexing strategy, identifying the factors that influence performance, such as data volume, query complexity, and event characteristics. Furthermore, we discuss the implications of our findings for the design and optimization of CEP systems, offering recommendations for indexing strategy selection based on the specific requirements and workload characteristics. Finally, we outline the potential limitations of our study and suggest future research directions in this domain.

Usually, IoT devices are designed to perform specific tasks, while robots have to adapt to unpredictable situations. Artificial intelligence and machine learning help these robots cope with the emerging unexpected conditions. The Internet of Robotic Things is an evolving concept that brings together all-encompassing sensors and devices with robotic and autonomous systems. Both IoT devices and robots rely on sensors to understand the surrounding environment, to process data quickly, and to decide how to respond. Nevertheless, while most IoT systems can handle only well-defined tasks, robots can handle expected situations as well. The Internet of Robotic Things is a better Internet of Things (IoT) solution due to its ability to bridge the gap between IT and real operations. The IoRT may face several challenges in power consumption and network bandwidth limitation due to the growth in the information dissemination over the Robotic network. The main objective of this paper is to introduce an overview of the concepts and challenges in the Internet of Robotic Things based on Fog Computing technique. Further, a framework of Fog based IoRT is introduced.

The Internet of Things (IoT) has had a considerable influence on our daily lives by enabling enhanced connection of devices, systems, and services that extends beyond machine-to-machine interactions and encompasses a wide range of protocols, domains, and applications. However, despite privacy concerns shown by IoT users, little has been done to reduce and protect individual information exposure. It is extremely difficult to mitigate IoT devices from reidentification threats which is why it is still a major challenge for IoT users to securely protect their information. The trust controls how we regulate privacy in our IoT platforms in the same way that it governs personal relationships. As IoT devices become increasingly linked, more data is shared across individuals, businesses, governments, and ecosystems. Technologies, sensors, machines, data, and cloud connections all rely largely on trust relationships that have been formed. With the rapid growth of additional types of IoT devices that are being introduced, it, therefore, expands privacy concerns and is difficult to develop trust with an IoT system or device without the option to regulate information privacy settings. Privacy has always been a barrier for many devices as they race for the early adoption of IoT technologies. Several Internet of Things devices or systems will continue to pose privacy threats. As a result, the main objective of this study was to examine the individual understanding of privacy and to promote information privacy protection awareness not only to IoT users but also to organizations that use IoT devices or platforms to run their day-to-day business operations. Furthermore, the objective extends to compare user knowledge and concerns about IoT privacy, as well as to identify any common attitudes and variances. However, in terms of enhancing individuals’ knowledge, an artifact was developed to educate and enhance information privacy awareness among IoT users. A pre- and postquestionnaire was generated to test and validate user knowledge regarding information privacy protection in IoT. The study was conducted using a quantitative research method. Findings indicate that IoT users’ awareness of information privacy protection turned out to be average, suggesting a need for education and awareness. Several participants stated that information privacy protection awareness is required within the community to educate, raise awareness, eliminate human error, and enable individuals to be conscious of their privacy when surfing the Internet.

The Internet of Things (IoT) devices is able to communicate with another IoT devices in heterogeneous environments. They are also able to create a network by their own using wireless capabilities without a centralized approach. This network is called wireless mobile ad hoc network (MANET). The MANET facilitate IoT devices to communicate with each other in an infrastructure less network of the Internet of Things environment. The IoT devices can dynamically join, create connection and exchange information among them. The role of cloud in this framework is to store and process the data by IoT devices. The communication Security has been raised as one of the most critical issues of cloud computing where resolving such an issue would result in a constant growth in the use and popularity of cloud. Our purpose of this study is to create a framework for providing the communication in an integrated framework of Cloud and MANET among IoT devices. Our main contribution links a new study that integrates cloud computing to the MANET and provides communication to the internet of things. This study can be used in the framework of the Internet of Things in future.