Tropospheric effects on L‐band geosynchronous circular SAR imaging

Circular synthetic aperture radar (SAR) imaging on the geosynchronous orbit has many potential advantages, such as high-resolution three-dimensional (3D) imaging and continuous surveillance of broad area. The mission considered is an L-band geosynchronous circular SAR (GEOCSAR) with full aperture measurement. Since the integration time of GEOCSAR can be as long as 24 h, the orbit altitude is about 36 000 km and the coverage may reach 1/3 of the Earth's surface. The spatial and temporal variation of the ionosphere may impose significant effects on 3D imaging performance of GEOCSAR. The effects of ionospheric spatial variation including vertical and horizontal structure, the ionospheric turbulence and the ionospheric temporal variation are discussed. The analysis shows that the temporal variation of the ionospheric electron content during the synthetic aperture and the ionospheric turbulence may severely affect the GEOCSAR focusing performance on the XY plane. The vertical and horizontal structure of the ionosphere will cause image shift, and the dispersion effect is negligible.

Transient temperature response in semitransparent variable refractive index medium subjected to a pulse irradiation

As important man-made targets, bridges have been a major focus of Synthetic Aperture Radar (SAR) image interpretation, and many researchers have developed methods for bridge detection. The core frameworks of these methods are analogical, a river is first extracted, and a water bridge is detected based on the positional relationship between the river and bridge. However, existing bridge detection methods relying on river extraction; cannot be utilized detect land bridges. This is because the background environment under a bridge is land, not river, which has different scattering characteristics and shape layouts. As such, the traditional method for extracting rivers is not suitable for extracting land background, and it is impossible to locate a bridge based on prior knowledge of its location of. To resolve this problem, in this study, we propose a land bridge detection method based on polarized Circular SAR (CSAR) images. In our proposed method, the Circular Polarization Entropy (CPE) of an observed scene is introduced to separate possible bridge targets from a land background (In our experiment, the average CPE of the bridge is 0.4018, and that of the land background is 0.7819; thus there is a clear difference between the bridge and background). False targets are removed based on the difference in the polarization entropy variance features of the bridges and other ground objects; and the size characteristics of the bridges. Finally, accurate extractions of land bridges are obtained based on the geometric characteristics of the bridges. Experimental results based on real airborne L-band polarized CSAR data verify the correctness of the theoretical analysis and effectiveness of the proposed method.

Bulk scattering in polycrystalline laser materials (PLM), due to non-uniform refractive index across the bulk, is regarded as the primary loss mechanism leading to degradation of laser performance with higher threshold and lower output power. The need for characterization techniques towards identifying bulk scatter and assessing the quality. Assessment of optical quality and the identification of bulk scatter have been by simple visual inspection of thin samples of PLMs, thus making the measurements highly subjective and inaccurate. A modified white light Schlieren Imaging Setup utilizing variable focusing capability is demonstrated. The white light Schlieren Imaging Setup makes it possible to image the spatial variations in the refractive index in the PLMs regardless of dimensions, which are the cause of bulk scattering loss in a transparent material over the entire cross-sectional area of the sample. The high sensitivity of white light Schlieren provides the ability of directly imaging the local spatial variations in refractive index across the entire sample dimension and compare different samples.

The classification of high-resolution (HR) synthetic aperture radar (SAR) images is of great importance for SAR scene interpretation and application. However, the presence of intricate spatial structural patterns and complex statistical nature makes SAR image classification a challenging task, especially in the case of limited labeled SAR data. This paper proposes a novel HR SAR image classification method, using a multi-scale deep feature fusion network and covariance pooling manifold network (MFFN-CPMN). MFFN-CPMN combines the advantages of local spatial features and global statistical properties and considers the multi-feature information fusion of SAR images in representation learning. First, we propose a Gabor-filtering-based multi-scale feature fusion network (MFFN) to capture the spatial pattern and get the discriminative features of SAR images. The MFFN belongs to a deep convolutional neural network (CNN). To make full use of a large amount of unlabeled data, the weights of each layer of MFFN are optimized by unsupervised denoising dual-sparse encoder. Moreover, the feature fusion strategy in MFFN can effectively exploit the complementary information between different levels and different scales. Second, we utilize a covariance pooling manifold network to extract further the global second-order statistics of SAR images over the fusional feature maps. Finally, the obtained covariance descriptor is more distinct for various land covers. Experimental results on four HR SAR images demonstrate the effectiveness of the proposed method and achieve promising results over other related algorithms.

In high-resolution (HR) and very-high resolution (VHR) synthetic aperture radar (SAR) images, focus is now on the patch-oriented image categorization in contrast to the pixel-based classification in low-resolution SAR images. SAR image categorization requires the generation of a compact feature descriptor that accurately defines the content of the image patch under consideration. In this paper we propose a parametric feature descriptor generated on the complex-valued SAR image within a transformation space. The fractional Fourier transform (FrFT), has been considered to transform the image pixels of the single-look complex (SLC) SAR images in order to obtain a simpler statistical response. The real and imaginary components of the complex-valued FrFT coefficients have been modelled with generalized Gaussian distribution (GGD). The proposed feature descriptor is compared with a Wavelet-decomposition-based parametric feature descriptor; and with the FrFT-based and Gabor-filter-bank-based non-parametric feature descriptors. Categorization accuracy enhancement is demonstrated over several categories comprising of natural topologies. The experimental database consists of 2000 image patches (of size 200 × 200 pixels) extracted from SLC HR TerraSAR-X scenes.

The usage of a hypersonic platform for remote sensing application has promising prospects, especially for hypersonic platform-borne synthetic aperture radar (SAR) imaging. However, the high-speed of hypersonic platform will lead to extreme friction between the platform and air, which will cause the ionization of air. The ionized gas forms the plasma sheath wrapped around the hypersonic platform. The plasma sheath will severely affect the propagation of SAR signal and further affect the SAR imaging. Therefore, hypersonic platform-borne SAR imaging should be studied from a physical perspective. In this paper, hypersonic platform-borne SAR imaging under plasma sheath is analyzed. The SAR signal propagation in plasma sheath is computed using scatter matrix method. The proposed SAR signal model is verified by using a ground experiment system. Moreover, the effect of attenuation caused by plasma sheath on SAR imaging is studied under different SAR parameters and plasma sheath. The result shows that attenuation caused by plasma sheath will degrade the SAR imaging quality and even cause the point and area targets to be submerged into the noise. The real SAR images under plasma sheath also illustrate this phenomenon. Furthermore, by studying imaging results under different SAR and plasma parameters, it can be concluded that the severe degradation of SAR imaging quality appears at condition of high plasma sheath electron density and low SAR carrier frequency. The work in this paper will be beneficial for the study of hypersonic platform-borne SAR imaging and design of hypersonic SAR imaging systems in the future.

In general, synthetic aperture radar (SAR) imaging and image processing are two sequential steps in SAR image processing. Due to the large size of SAR images, most image processing algorithms require image segmentation before processing. However, the existence of speckle noise in SAR images, as well as poor contrast and the uneven distribution of gray values in the same target, make SAR images difficult to segment. In order to facilitate the subsequent processing of SAR images, this paper proposes a new method that combines the back-projection algorithm (BPA) and a first-order gradient operator to enhance the edges of SAR images to overcome image segmentation problems. For complex-valued signals, the gradient operator was applied directly to the imaging process. The experimental results of simulated images and real images validate our proposed method. For the simulated scene, the supervised image segmentation evaluation indexes of our method have more than 1.18%, 11.2% and 11.72% improvement on probabilistic Rand index (PRI), variability index (VI), and global consistency error (GCE). The proposed imaging method will make SAR image segmentation and related applications easier.

Accurate optical and synthetic aperture radar (SAR) image registration is crucial to multisensor remote sensing applications. Though several algorithms have been proposed, the practical implementation that directly matches large and high-resolution optical and SAR images remains underexplored by the community. Equipped with the satellite positioning parameters, optical and SAR images can be roughly registered based on geographic coordinates. However, the relative positioning accuracy is still dozens, even hundreds of pixels due to the inaccuracies of sensor parameters and elevation. Consequently, we propose a robust registration algorithm, which consists of two stages, where the horizontal positioning errors can be reduced in the first stage, and then, we fine-tune the correspondences in the second stage. Specifically, we propose a novel template matching method based on the dilated convolutional feature (DCF) and epipolar-oriented phase correlation. DCF is constructed by a depthwise-separable dilated convolution with multichannel gradients, which are generated by the Sobel operator for optical images and a ratio of exponentially weighted averages (ROEWA) operator for SAR images. Due to the large reception field of dilated convolution, DCF can retain invariance even for large relative positioning errors. The epipolar-oriented rectangle template, which stretches along the epipolar line, is then proposed to capture more overlapping areas compared to square templates. Furthermore, the outlier removal is implemented in the coordinate system of optical images to avoid the effect of range compression in SAR images. Inliers are finally used to refine the rational polynomial coefficients (RPCs) based on the bundle adjustment technique. Experimental results on high-resolution optical and SAR image products of various scenarios demonstrate the effectiveness of the proposed registration framework. The relative positioning errors of the refined RPCs can be reduced from hundreds of pixels to the subpixel level.

Due to its great application value in the military and civilian fields, ship detection in synthetic aperture radar (SAR) images has always attracted much attention. However, ship targets in High-Resolution (HR) SAR images show the significant characteristics of multi-scale, arbitrary directions and dense arrangement, posing enormous challenges to detect ships quickly and accurately. To address these issues above, a novel YOLO-based arbitrary-oriented SAR ship detector using bi-directional feature fusion and angular classification (BiFA-YOLO) is proposed in this article. First of all, a novel bi-directional feature fusion module (Bi-DFFM) tailored to SAR ship detection is applied to the YOLO framework. This module can efficiently aggregate multi-scale features through bi-directional (top-down and bottom-up) information interaction, which is helpful for detecting multi-scale ships. Secondly, to effectively detect arbitrary-oriented and densely arranged ships in HR SAR images, we add an angular classification structure to the head network. This structure is conducive to accurately obtaining ships’ angle information without the problem of boundary discontinuity and complicated parameter regression. Meanwhile, in BiFA-YOLO, a random rotation mosaic data augmentation method is employed to suppress the impact of angle imbalance. Compared with other conventional data augmentation methods, the proposed method can better improve detection performance of arbitrary-oriented ships. Finally, we conduct extensive experiments on the SAR ship detection dataset (SSDD) and large-scene HR SAR images from GF-3 satellite to verify our method. The proposed method can reach the detection performance with precision = 94.85%, recall = 93.97%, average precision = 93.90%, and F1-score = 0.9441 on SSDD. The detection speed of our method is approximately 13.3 ms per 512 × 512 image. In addition, comparison experiments with other deep learning-based methods and verification experiments on large-scene HR SAR images demonstrate that our method shows strong robustness and adaptability.

This paper proposes a novel method on Synthetic Aperture Radar (SAR) Image denoising, which is based on context modeling combined with multiscale orthogonal bandlet coefficients. For the main influence of SAR image is multiplicative speckle noise, the logarithm uniform transform is used to convert it to additive noise. In this paper, the multiscale orthogonal bandlet transform is applied to noisy SAR Image. The contextual model is used to compute contextual values of bandlet coefficients on each scale. Therefore, bandlet coefficients are reconstructed into some parts by contextual values. The spatially adaptive soft-threshold (T) is to denoise SAR image in each part. Experimental results demonstrate that this method outperforms the methods of Ehance-Lee (E-lee), contextual model based on wavelet domain (Wavelet-context), and Hidden Markov Tree model bases on wavelet domain (Wavelet-hmt) on there indexes: Floating index (FI), Standard deviation and Edge saving index of vertical direction, by using a real SAR image. However, the method can not only reduce the speckle noise but also preserve edges and high frequency information, and gets considerable visual effect on SAR Image denoising.

In this article, we propose a novel method of estimation of crack orientation on a metallic surface using linearly polarized circular synthetic aperture radar (SAR) imaging. We modeled a crack using a thin linear scatterer and considered the rotation of polarization basis vectors that were designed to match a predefined orientation vector corresponding to a temporary estimate of the orientation of the linear scatterer. The radar image intensity was expected to be a maximum when the specified orientation vector exactly matched the true scatterer orientation angle; therefore, to estimate the orientation of the scatterer, we aimed to obtain the maximum intensity of the image by varying the orientation vector. We validated the proposed scheme of estimation via a numerical electromagnetic simulation using the method of moments (MoM) and laboratory measurements carried out in an anechoic chamber. In this experiment, a metallic plate with slits was used as a simple surface crack model and the root mean square error and maximum error of the angular estimation were 1.9-degree and 5.1-degree, respectively.

A novel three-step method to reduce speckle in Synthetic Aperture Radar (SAR) images is presented. First, an edge detector is used to detect the edge orientations in SAR images. Second, using a data processing method named empirical mode decomposition, the SAR image is smoothed along four directions: horizontal, vertical, left diagonal and right diagonal, respectively. Third, the SAR image is reconstructed such that if the edge direction is horizontal, the pixel smoothed along the horizontal direction is used to reconstruct the image, and so on; if an edge is not detected, the mean of the four directionally smoothed images is used to reconstruct the image. Application of this method to SAR images has shown that it is well balanced in the quality of visual appearance, mean preservation, edge preservation, and reduction of the standard deviation.

ABSTRACTThe speckle noise of synthetic aperture radar (SAR) images limits its application in change detection. Compared with improved ratio (IR) and log-ratio (LR) operators, the neighborhood-based ratio (NR) technique can restrain the influence of speckle noise and is more suitable for change detection in SAR images. However, we find three drawbacks of NR by analyzing this method carefully. To overcome these defects, we propose an improved neighborhood-based ratio (INR) approach for change detection in SAR images. INR restructures the NR operator to exploit the neighborhood information more reasonably and is expected to reduce the impact of speckle noise better. IR, LR, mean ratio operator, NR, and INR are tested on two data sets to compare their performances in change detection of SAR images. Experimental results show that the proposed method can obtain better difference image than other state-of-art methods and improve the accuracy of change detection in SAR images effectively.

We address the application of model-supported exploitation techniques to synthetic aperture radar (SAR) imagery. The emphasis is on monitoring SAR imagery using wide area 2D and/or 3D site models along with contextual information. We consider here the following tasks useful in monitoring: (a) site model construction using segmentation and labeling techniques, (b) target detection, (c) target classification and indexing, and (d) SAR image-site model registration. The 2-D wide area site models used here for SAR image exploitation differ from typical site models developed for RADIUS applications, in that they do not model specific facilities, but constitute wide area site models of cultural features such as urban clutter areas, roads, clearings, fields, etc. These models may be derived directly from existing site models, possibly constructed from electro-optical (EO) observations. When such models are not available, a set of segmentation and labeling techniques described here can be used for the construction of 2D site models. The use of models can potentially yield critical information which can disambiguate target signatures in SAR images. We address registration of SAR and EO images to a common site model. Specific derivations are given for the case of registration within the RCDE platform. We suggest a constant false alarm rate (CFAR) detection scheme and a topographic primal sketch (TPS) based classification scheme for monitoring target occurrences in SAR images. The TPS of an observed target is matched against candidate targets TPSs synthesized for the preferred target orientation, inferred from context (e.g. road or parking lot targets). Experimental results on real and synthetic SAR images are provided.