- Research Article
145
- 10.1016/j.powtec.2010.03.023
Particle clusters in and above fluidized beds
- Apr 02, 2010
- Powder Technology
- Ray Cocco + 4 more +4
Particle clusters in and above fluidized beds
We show that the unsteadiness of turbulence has a drastic effect on turbulence parameters and in particle cluster formation. To this end we use direct numerical simulations of particle laden flows with a steady forcing that generates an unsteady large-scale flow. Particle clustering correlates with the instantaneous Taylor-based flow Reynolds number, and anticorrelates with its instantaneous turbulent energy dissipation constant. A dimensional argument for these correlations is presented. In natural flows, unsteadiness can result in extreme particle clustering, which is stronger than the clustering expected from averaged inertial turbulence effects.
Particle clusters in and above fluidized beds
Particle clusters in and above fluidized beds
Numerical simulation of turbulent duct flows with constant power input
The numerical simulation of a flow through a duct requires an externally specified forcing that makes the fluid flow against viscous friction. To this end, it is customary to enforce a constant value for either the flow rate (CFR) or the pressure gradient (CPG). When comparing a laminar duct flow before and after a geometrical modification that induces a change of the viscous drag, both approaches lead to a change of the power input across the comparison. Similarly, when carrying out direct numerical simulation or large-eddy simulation of unsteady turbulent flows, the power input is not constant over time. Carrying out a simulation at constant power input (CPI) is thus a further physically sound option, that becomes particularly appealing in the context of flow control, where a comparison between control-on and control-off conditions has to be made. We describe how to carry out a CPI simulation, and start with defining a new power-related Reynolds number, whose velocity scale is the bulk flow that can be attained with a given pumping power in the laminar regime. Under the CPI condition, we derive a relation that is equivalent to the Fukagata–Iwamoto–Kasagi relation valid for CFR (and to its extension valid for CPG), that presents the additional advantage of naturally including the required control power. The implementation of the CPI approach is then exemplified in the standard case of a plane turbulent channel flow, and then further applied to a flow control case, where a spanwise-oscillating wall is used for skin-friction drag reduction. For this low-Reynolds-number flow, using 90 % of the available power for the pumping system and the remaining 10 % for the control system is found to be the optimum share that yields the largest increase of the flow rate above the reference case where 100 % of the power goes to the pump.
Read moreCoupling multibody dynamics and computational fluid dynamics on 8192 processor cores
Coupling multibody dynamics and computational fluid dynamics on 8192 processor cores
Cluster formation during aging of colloid-polymer dispersions
Cluster formation during aging of colloid-polymer dispersions
Particle-resolved direct numerical simulation of particle-laden turbulent channel flow
Particle-resolved direct numerical simulations for particle-laden turbulent channel flow are performed by lattice Boltzmann method coupled with discrete element method. The modulation effects of particles on turbulent flow and spatial particle dispersion are studied under wide particle-to-fluid density ratio (ρp/ρf) ranging from 1.5 to 10 and solid volume fraction (ϕv) ranging from 2% to 20%. Simulation results indicate that as ρp/ρf increases, the overall turbulent kinetic energy (TKE) decreases, and the peak of TKE shifts from wall to channel center. Correspondingly, the peak of particle cluster grows higher, and particle distribution becomes more uniform further away from cluster, which can be revealed through both Shannon entropy and local solid phase volume fraction. Additionally, at low ρp/ρf, a dense distribution with a concentration higher than average ϕv forms at a channel center. With increasing ϕv, TKE is enhanced near wall and diminishes at the channel center, due to the fact that the particle cluster obstructs the influx of wall vortices into the channel center. With further increases in ϕv, mainstream velocity first weakens to zero, then reverses and intensifies. Particle cluster at the channel center can occur under both high and low ϕv, which essentially related to mainstream velocity.
Read moreLift-off of multiple particles in a narrow channel
In this work, we perform simulations of particle laden flow in a wide and long narrow channel in a Newtonian fluid. Simulations are performed for mono-sized and equal density spheres with varying Archimedes and Reynolds number. In the simulations, different phases of particle transport - rolling, saltation and suspension are observed. During simulations the average bed height is monitored and its steady state value is used for proposing a correlation between solids volume fraction (ϕ), shear Reynolds number (Res) and Archimedes number (Ar). This correlation is used to predict the critical shear Reynolds number for particle lift-off and a condition at which particles would occupy the whole channel at a given Archimedes number. The value of this critical Reynolds number is compared with the critical Reynolds number for single particle lift-off.
Read moreLattice Boltzmann Simulation of Particle Laden Flows in Microfluidic Systems
Lattice Boltzmann Simulation of Particle Laden Flows in Microfluidic Systems
Numerical simulation of a two-component gas flow near a highway
Numerical simulation of the air flow near a highway was carried out taking into account injection of ethane through a system of low sources. Numerical model is based on full physical and mathematical models of continuum media and takes into account the phenomena of turbulent mixing of gas components in the surface boundary layer. Based on the calculation results, the fields of velocity distribution, turbulent parameters and impurity concentrations in characteristic sections near the road are obtained.
Read moreIMPROVEMENT OF ENERGY PERFORMANCE OF THE INLET FLOW PART OF A HIGH-HEAD HYDROTURBINE
Many hydroelectric power plants use a Francis turbine, known for its versatility and efficiency in converting hydraulic energy into mechanical energy.Two integral components of this hydroturbine are the spiral case and the guide vane, which play a key role in controlling the flow of water through the hydroturbine system, ensuring optimal performance and energy production. The process of developing new flow space of hydroturbines consists ofseveral consecutive stages, in particular: selection of design parameters of the hydroturbine for given conditions of the hydroelectric power plant anddesign of flow space elements (as a rule, several options are considered, differing in calculation methods, geometric, kinematic and other parameters); computational study of flow characteristics, power and torques, energy losses in flow space elements and determination of the best options; experimental study of model hydroturbine units on energy cavitation stands, and the dimensions of the model, test conditions and stand parameters must meet the requirements of the international IEC standard. Based on the results of experimental and computational studies of the model, the characteristics are calculated and guarantees for the operation of a full-scale hydroturbine are issued. The article presents some results of a computational study of the spatial turbulent flow of a viscous fluid in the flow space of a high-head turbine Fr500, performed using the CFXTASCflow application software package. To improve the energy characteristics at the stage of preliminary turbine design, numerical simulation of the flow should be carried out. Such a CFD approach reduces costs and time compared to the experimental approach and makes it possible to improve and analyze the characteristics of the hydroturbine and its design before manufacturing the model. The computational complex of programs provides an opportunity to see the pressure distribution pattern, the velocity vector field and the motion of fluid particles for substantiation and analysis of the results. Numerical simulation of the spatial flow in the flow section of the hydroturbine was carried out to determine changes in energy characteristics, therefore, the k-ε turbulence model was chosen. As a result of the calculation, the distribution of speeds and pressures in various elements of the hydroturbine was determined for different profiles of the guide vane. An analysis of energy losses in the flow part of the high-head hydroturbine was carried out: a spiral case, a stator with flat rings, a guide vane, an runner and a suction pipe for the optimal operation mode of the hydroturbine, and an analysis of the influence of opening the guide vane on the change in energy losses in various elements of the flow space was also carried out. The issue of increasing the energy efficiency of the flow space of the high-head hydroturbine was also considered.
Read moreNumerical Simulation of Backward Facing Step Flow Using Nonlinear Eddy Viscosity Model
Nonlinear eddy viscosity models have received significant interest because of the shortcomings of linear eddy viscosity models used in the numerical simulation of flow around building structures. There are many kinds of nonlinear eddy viscosity models. This paper adopts one of them to simulate backward facing step flow, which aims to evaluate the properties of this turbulence model. Compared with linear eddy viscosity model and experimental measurements, the simulation of nonlinear eddy viscosity model gives better results, especially for the reattachment length and pressure coefficient values. For this reason, this nonlinear eddy viscosity model is more suitable for numerical simulation of complex flow around building structures than linear eddy viscosity model.
Read moreOptimisation of Pelton turbine jet deflector using CFD analysis
The high head Pelton turbines operate with extreme conditions. In case to need a sudden stop of operation, one of the important parts is jet deflector, which can be in push-out, or cut-of options. The paper presents the optimisation procedure of Pelton Turbine push-out jet deflector shape using numerical simulation of three-dimensional turbulent flow in order to minimize the forces, stresses, deformations and torque of jet deflector servomotor. The calculations are performed using the CFD package Ansys CFX. The steps for flow modelling, 3-D geometry definition, mesh generation, pre-processing and post-processing, as well as the optimised results obtained from the numerical simulation of the flow in the jet-deflector are presented. The work corresponds with the actual approach of methods development for flow simulation and calculations of Pelton Turbines. The kinematic and dynamic flow parameters are calculated based on CFD simulations. The results of the calculations represents reliable tool in the procedure of development and construction of Pelton Turbines parts.
Read moreNumerical simulation of blood and plasma flow through the Petschek flow chambers.
The Stagnation Point Flow Experiment is a popular means for studying blood-surface interactions in a surface strain rate gradient. The strain rate distribution on the test surface of the flow chamber used in this experiment was originally assumed to be simply proportional to the radial distance from the stagnation point. A numerical simulation of the flows through the five most frequently used chambers shows that this is true only for one of the chambers, approximately so for another, and not true for the other three. An additional numerical simulation indicates the blood should purge the saline priming liquid within a few seconds at the beginning of the experiment.
Read moreNumerical Simulation of Flow and Heat Transfer in Rotating Cooling Passage With Turning Vane in Hub Region
Numerical simulation of three-dimensional turbulent flow and heat transfer was performed in a multipass rectangular (AR = 2:1) rotating cooling channel with and without turning vane in the hub region under various flow conditions, with two different Reynolds numbers of 10,000 and 25,000, two different channel orientations of 45-deg and 90-deg, and the rotation number varies from 0 to 0.2. This study shows that the addition of the turning vane in the hub turn region does not cause much impact to the flow before the hub. However, it significantly alters the flow reattachment and vortex distribution in the hub turn region and after the hub turn portion. The local heat transfer is deeply influenced by this complex flow field and this turning vane effect lasts from the hub turn region to the portion after it.
Read moreAn extendedk-ε model for numerical simulation of wind flow around buildings
An extendedk-ε model for numerical simulation of wind flow around buildings
Behavior of particles in turbulence over a wavy boundary
Behavior of particles in turbulence over a wavy boundary