- Supplementary Content
16
- 10.1016/j.matt.2021.05.020
1D topological systems for next-generation electronics
- Aug 01, 2021
- Matter
- Hyeuk Jin Han + 2 more +2
1D topological systems for next-generation electronics
Three-dimensional topological semimetals are a class of electronic materials in which their bulk and surface states contain linear band touching nodes near the Fermi level. Like semiconductors, their properties will be affected by point and extended defects in their crystal structures, although the extent to which defects and disorders influence topological semimetals may differ in key ways due to their unique electronic structures. In this Tutorial, we provide an overview of the defects in topological semimetals, covering both computational and experimental methods for exploring defect-property relationships. We also include a discussion on open questions that still need to be explored further.
1D topological systems for next-generation electronics
1D topological systems for next-generation electronics
Magnetic Topological Dirac Semimetal Transition Driven by SOC in EuMg2Bi2
Magnetic topological semimetals have been at the forefront of condensed matter physics due to their ability to exhibit exotic transport phenomena. Investigating the interplay between magnetic and topological orders in systems with broken time-reversal symmetry is crucial for realizing non-trivial quantum effects. We delve into the electronic structure of the rare-earth-based antiferromagnetic Dirac semimetal EuMg2Bi2 using first-principles calculations and angle-resolved photoemission spectroscopy. Our calculations reveal that the spin–orbit coupling (SOC) in EuMg2Bi2 prompts an insulator to topological semimetal transition, with the Dirac bands protected by crystal symmetries. The linearly dispersive states near the Fermi level, primarily originating from Bi 6p orbitals, are observed on both the (001) and (100) surfaces, confirming that EuMg2Bi2 is a three-dimensional topological Dirac semimetal. This research offers pivotal insights into the interplay between magnetism, SOC and topological phase transitions in spintronics applications.
Read moreResearch progress of single crystal growth for topological semimetals
Topological semimetals have attracted much attention and become a hot subject in condensed matter physics, and single crystal growth is the basis of the physical investigation on these materials. At present, the research of topological materials has formed a cooperation circle:presenting materials by theoretical calculation; single crystal growth; verification by experiments on single crystals. Single crystal growth has become a bridge between theory and experiment. Here in this paper, we introduce the single crystal growth of the topological semimetals presented in recent years, including topological Dirac semimetals, Weyl semimetals, Node-Line semimetals and other new classes of topological materials. The detailed growth methods are summarized in this paper for each material.
Read moreTwo-dimensional topological semimetals: an emerging candidate for terahertz detectors and on-chip integration.
The importance of terahertz (THz) detection lies in its ability to provide detailed information in a non-destructive manner, making it a valuable tool across various domains including spectroscopy, communication, and security. The ongoing development of THz detectors aims to enhance their sensitivity, resolution and integration into compact and portable devices such as handheld scanners or integrated communication chips. Generally, two-dimensional (2D) materials are considered potential candidates for device miniaturization but detecting THz radiation using 2D semiconductors is generally difficult due to the ultra-small photon energy. However, this challenge is being addressed by the advent of topological semimetals (TSM) with zero-bandgap characteristics. These semimetals offer low-energy excitations in proximity to the Dirac point, which is particularly important for applications requiring a broad detection range. Their distinctive band structures with linear energy-momentum dispersion near the Fermi level also lead to high electron mobility and low effective mass. The presence of topologically protected dissipationless conducting channels and self-powered response provides a basis for low-energy integration. In order to establish paradigms for semimetal-based THz detectors, this review initially offers an analytical summary of THz detection principles. Then, the review demonstrates the distinct design of devices, the excellent performance derived from the topological surface state and unique band structures in TSM. Finally, we outline the prospective avenues for on-chip integration of TSM-based THz detectors. We believe this review can promote further research on the new generation of THz detectors and facilitate advancements in THz imaging, spectroscopy, and communication systems.
Read moreTopological semimetal interface resistivity scaling for vertical interconnect applications
In this work, we explore the electron scattering characteristics at interfaces between normal metals and topological semimetals in bulk as well as in thin film structures. We consider Cu/Ta and CoSi/Ta as representative metal/metal and topological semimetal/metal interface structures, respectively. For bulk interface structures, we find that metal/topological semimetal interfaces have roughly 20× higher interfacial resistivity than normal metal/metal interfaces primarily due to the low electronic density of states, the Fermi level in bulk topological semimetals. For thin films, we find that normal metal/metal interfacial resistivity shows a weak dependence on film thickness and is generally close to the corresponding bulk value. Interfaces between surface-conduction dominated topological semimetals, such as CoSi and normal metals in thin films, however, show decreasing interfacial resistivity with decreasing film thickness. This apparent reduction in interface resistivity originates from the surface-dominated transport, where the total transmission across the interface varies little with reduced film thickness, yielding an effective increase in interface conductivity at smaller dimensions. These results suggest that topological semimetals may be attractive candidates for next-generation interconnect materials with critically small dimensions where interfaces with other metals are ubiquitous.
Read moreThe study of magnetic topological semimetals by first principles calculations
Magnetic topological semimetals (TSMs) are topological quantum materials with broken time-reversal symmetry (TRS) and isolated nodal points or lines near the Fermi level. Their topological properties would typically reveal from the bulk-edge correspondence principle as nontrivial surface states such as Fermi arcs or drumhead states, etc. Depending on the degeneracies and distribution of the nodes in the crystal momentum space, TSMs are usually classified into Weyl semimetals (WSMs), Dirac semimetals (DSMs), nodal-line semimetals (NLSMs), triple-point semimetals (TPSMs), etc. In this review article, we present the recent advances of magnetic TSMs from a computational perspective. We first review the early predicted magnetic WSMs such as pyrochlore iridates and HgCr2Se4, as well as the recently proposed Heusler, Kagome layers, and honeycomb lattice WSMs. Then we discuss the recent developments of magnetic DSMs, especially CuMnAs in Type-III and EuCd2As2 in Type-IV magnetic space groups (MSGs). Then we introduce some magnetic NLSMs that are robust against spin–orbit coupling (SOC), namely Fe3GeTe2 and LaCl (LaBr). Finally, we discuss the prospects of magnetic TSMs and the interesting directions for future research.
Read moreThermoelectric performance of classical topological insulator nanowires
There is currently substantial effort being invested into creating efficient thermoelectric (TE) nanowires based on topological insulator (TI) chalcogenide-type materials. A key premise of these efforts is the assumption that the generally good TE properties that these materials exhibit in bulk form will translate into similarly good or even better TE performance of the same materials in nanowire form. Here, we calculate TE performance of TI nanowires based on Bi2Te3, Sb2Te3 and Bi2Se3 as a function of diameter and Fermi level. We show that the TE performance of TI nanowires does not derive from the properties of the bulk material in a straightforward way. For all investigated systems the competition between surface states and bulk channel causes a significant modification of the TE transport coefficients if the diameter is reduced into the sub 10 μm range. Key aspects are that the surface and bulk states are optimized at different Fermi levels or have different polarity as well as the high surface to volume ratio of the nanowires. This limits the maximum TE performance of TI nanowires and thus their application in efficient TE devices.
Read moreHighly Occupied Surface States at Deuterium-Grown Boron-Doped Diamond Interfaces for Efficient Photoelectrochemistry.
Polycrystalline boron-doped diamond is a promising material for high-power aqueous electrochemical applications in bioanalytics, catalysis, and energy storage. The chemical vapor deposition (CVD) process of diamond formation and doping is totally diversified by using high kinetic energies of deuterium substituting habitually applied hydrogen. The high concentration of deuterium in plasma induces atomic arrangements and steric hindrance during synthesis reactions, which in consequence leads to a preferential (111) texture and more effective boron incorporation into the lattice, reaching a one order of magnitude higher density of charge carriers. This provides the surface reconstruction impacting surficial populations of CC dimers, CH, CO groups, and COOH termination along with enhanced kinetics of their abstraction, as revealed by high-resolution core-level spectroscopies. A series of local densities of stateswerecomputed, showing a rich set of highly occupied and localized surface states for samples deposited in deuterium, negating the connotations of band bending. The introduction of enhanced incorporation of boron into (111) facet of diamond leads to the manifestation of surface electronic states below the Fermi level and above the bulk valence band edge. This unique electronic band structure affects the charge transfer kinetics, electron affinity, and diffusion field geometry critical for efficient electrolysis, electrocatalysis, and photoelectrochemistry.
Read moreHigher-Order Weyl-Exceptional-Ring Semimetals.
For first-order topological semimetals, non-Hermitian perturbations can drive the Weyl nodes into Weyl exceptional rings having multiple topological structures and no Hermitian counterparts. Recently, it was discovered that higher-order Weyl semimetals, as a novel class of higher-order topological phases, can uniquely exhibit coexisting surface and hinge Fermi arcs. However, non-Hermitian higher-order topological semimetals have not yet been explored. Here, we identify a new type of topological semimetal, i.e., a higher-order topological semimetal with Weyl exceptional rings. In such a semimetal, these rings are characterized by both a spectral winding number and a Chern number. Moreover, the higher-order Weyl-exceptional-ring semimetal supports both surface and hinge Fermi-arc states, which are bounded by the projection of the Weyl exceptional rings onto the surface and hinge, respectively. Noticeably, the dissipative terms can cause the coupling of two exceptional rings with opposite topological charges, so as to induce topological phase transitions. Our studies open new avenues for exploring novel higher-order topological semimetals in non-Hermitian systems.
Read moreThree-dimensional borophene: A light-element topological nodal-line semimetal with direction-dependent type-II Weyl fermions
Since spin can be regarded as a dummy degree of freedom, light-element topological semimetals (TSMs) are expected to be a promising alternative for spin-orbit-coupling based TSMs, which usually contain costly and toxic heavy elements. Using first-principles calculations combined with a bottom-up assembly strategy, herein we identify an intriguing light-element TSM, termed 3D borophene, which can be obtained by stacking synthesized 2D triangular borophene along the perpendicular direction. Under the protection of mirror symmetry, the linear band crossings between $\mathrm{B}\ensuremath{-}{p}_{xz}$ and ${p}_{y}$ states in the vicinity of the Fermi energy form two Weyl nodal lines running across the Brillouin zone in the ${k}_{y}=0$ plane. When the nodal lines are projected on the (010) surface, drumheadlike surface states and open Fermi arcs are observed, which provide vital evidence for experimental identification. Remarkably, by examining the defined slope index of the crossing bands in all possible $\mathbit{k}$ paths, we find that the nodal lines of 3D borophene are composed of type-II Weyl points due to the emergence of tilted Weyl cones. Our findings not only establish a lightweight Weyl-nodal-line semimetal, but also highlight a bottom-up assembly strategy for designing desirable TSMs from synthetic 2D materials.
Read moreTopological Semimetals from First Principles
We review recent theoretical progress in the understanding and prediction of novel topological semimetals. Topological semimetals define a class of gapless electronic phases exhibiting topologically stable crossings of energy bands. Different types of topological semimetals can be distinguished on the basis of the degeneracy of the band crossings, their codimension (e.g., point or line nodes), and the crystal space group symmetries on which the protection of stable band crossings relies. The dispersion near the band crossing is a further discriminating characteristic. These properties give rise to a wide range of distinct semimetal phases such as Dirac or Weyl semimetals, point or line node semimetals, and type I or type II semimetals. In this review we give a general description of various families of topological semimetals, with an emphasis on proposed material realizations from first-principles calculations. The conceptual framework for studying topological gapless electronic phases is reviewed, with a particular focus on the symmetry requirements of energy band crossings, and the relation between the different families of topological semimetals is elucidated. In addition to the paradigmatic Dirac and Weyl semimetals, we pay particular attention to more recent examples of topological semimetals, which include nodal line semimetals, multifold fermion semimetals, and triple-point semimetals. Less emphasis is placed on their surface state properties, their responses to external probes, and recent experimental developments.
Read moreA 4,4′,4″-nitrilotriphenoxyl radical derived from Yang's biradical
Phenoxyl radicals have attracted considerable attention due to their unique electronic structures and wide-ranging applications in physics, chemistry, biology, and materials science. Herein, we report the synthesis and in-depth characterization of a previously unreported 4,4′,4″-nitrilotriphenoxyl radical 3, structurally derived from Yang's biradical scaffold. Interestingly, electronic structure analyses reveal that 3 is a monoradical with an open-shell doublet ground state, wherein the unpaired electron is delocalized over the three peripheral 2,6-di-tert-butylphenoxyl units. Notably, radical 3 is metastable in solution, reverting to closed-shell hydroxyl precursor 2 with a half-life of ∼116 minutes. The hydroxyl 2 can be deprotonated to form anionic 4, which exhibits a closed-shell singlet ground state. Their unique electronic structures are further elucidated by single-crystal X-ray diffraction and assisted by computational methods, in which 3 is fully conjugated and adopts a C3-symmetric geometry, while both 2 and 4 exhibit distinct quinoidal character with apparent C2-symmetry. These findings offer fundamental insights into the electronic structures of nitrogen-bridged polyphenoxyl radicals and establish a new design platform for stable organic open-shell systems.
Read moreBoosting the discovery of 3D topological materials: mixing chemistry with physics via a two-step computational screening strategy
Topological materials in crystal solids, including topological insulators (TIs), topological crystalline insulators (TCIs), topological Dirac semimetals (DSMs), topological Weyl semimetals (WSMs), topological Dirac or Weyl nodal line semimetals (NLSMs) and beyond, are mainly featured with topological, protected non-trivial surface states, and their bulk phases are insulators or semimetals with the proper presence of Dirac cones, Weyl nodes or Dirac nodal lines around the Fermi level. The author suggests a two-step computational screening strategy of 3D topological materials by mixing chemistry with physics with the considerations of fully filled bands and band inversion.
Read moreObservation of multiple surface states in naturally cleavable chiral crystal PdSbSe
Chiral multifold fermions in topological semimetals host exotic quantum states, but their intuitive spectroscopic studies are often constrained by challenges in achieving high-quality surfaces. In this study, the authors employ high-resolution angle-resolved photoemission spectroscopy (ARPES) in combination with first-principles calculations to uncover multiple chiral Fermi arc surface states in the naturally cleavable topological semimetal PdSbSe. They provide direct spectroscopic evidence of multifold fermions and spin-split bulk bands, firmly establishing PdSbSe as a promising material platform for exploring topological chirality. Furthermore, the identification of high-order Chern numbers and robust surface states provides new insights into chiral electronic structures and paves the way for potential applications in topological quantum devices.
Read moreBulk and surface spin conductivity in topological insulators with hexagonal warping
We investigate the spin conductivity of topological insulators taking into account both the surface and quasi-two-dimensional bulk states. We apply a low-energy expansion of the Hamiltonian up to the third order in momentum and take into account the vertex corrections arising due to the short range disorder. Hexagonal warping gives rise to the additional anisotropic components in the spin conductivity tensor. Typically, isotropic part of the spin conductivity is larger than anisotropic one. The helical regime for the bulk states, in which the electrons in the Fermi level have the same projection of the spin on the direction of momentum, have been studied in a more detail. In this regime, a substantial increase of the spin conductivity contribution from the bulk states at the Fermi level is observed. We find that the bulk spin conductivity is insensitive to disorder if Rashba spin-orbit coupling is larger than disorder strength, otherwise, it is strongly suppressed. The contribution to the spin conductivity from the surface states is almost independent of the chemical potential, robust to disorder and its value is comparable to the spin conductivity contribution from the bulk states per layer. The obtained results are in agreement with experimental data.
Read more