Uniform decoupling by restricted static state feedback for linear time-varying analytic systems

Properties of double (or two-dimensional) Laplace transform (2DLT) for analysis of linear time-varying (LTV) systems are explored. The one-dimensional to two-dimensional expansion formulas, as well as the two-dimensional to one-dimensional reduction formulas, are outlined. The merit of the proposed technique for frequency analysis of LTV systems is demonstrated.

Chang transformation was introduced for decoupling the slow and fast dynamics of a singularly perturbed Linear Time Invariant (LTI) system, and it was subsequently extended to Linear Time-Varying (LTV) systems under the slowly-varying assumption by way of frozen-time eigenvalues. This paper extends Chang transformation from slowly-varying LTV systems to LTV systems, when the singularly perturbed system has a semi-proper coefficient matrix A <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">22</sub> (t) and LTV system ẇ(t) = A <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">22</sub> (t)w(t) is exponentially stable. Instead of using frozen-time eigenvalues based on slowly time-varying conditions, PD-eigenvalues for LTV systems are employed to characterize the exponential stability, thereby circumventing the slowly-varying constraint. Our results provide a larger bound on epsilon, which is a gauge on the validity of the Chang transformation, in some situations than using previous techniques. We have also recast the original Chang transformation so as to provide more insight into the decoupled subsystems. The insight will be useful in subsequent investigation on estimate of the Singular Perturbation Margin (SPM) for LTV systems. An equivalence relationship has recently been established for LTI system between the SPM and the Phase Margin (PM). The new results in this paper will facilitate the development of a PM-type stability margin metric for LTV systems, and for nonlinear, time-varying systems in the future.

This technical note is concerned with exponential stability analysis of linear time-varying systems represented by the second-order vector differential equations with the singular leading coefficient matrix. Using bounding techniques on the trajectories of the linear time-varying systems, the stability problem of the time-varying systems is transformed to that of the time-invariant systems and a new sufficient condition for exponential stability is derived. The obtained condition can be applied to the nonsingular case and it is proven that the condition for the nonsingular case is superior to a test presented in the recent literature. Analogously, the proposed method is also extended to the stability analysis for a class of linear time-varying systems with delay. By illustrative examples, better results are obtained by the proposed criteria as compared with some results in the literature.

In this paper, we discuss the disturbance decoupling problem by regular feedback for linear time-varying singular systems. First, we provide a new algorithm. Then, by such an algorithm, sufficient and necessary conditions for the solvability of the disturbance decoupling problem for linear time-varying singular systems are derived.

ABSTRACTIn this paper, we describe a constructive test to decide whether a given linear time-varying (LTV) differential system admits a stabilising compensator for the control tasks of tracking, disturbance rejection or model matching and construct and parametrise all of them if at least one exists. In analogy to the linear time-invariant (LTI) case, the ring of stable rational functions, noncommutative in the LTV situation, and the Kučera–Youla parametrisation play prominent parts in the theory. We transfer Blumthaler's thesis from the LTI to the LTV case and sharpen, complete and simplify the corresponding results in the book ‘Linear Time-Varying Systems’ by Bourlès and Marinescu.

A physical parameter identification method for the linear time-varying system is presented in this paper. For an arbitrarily time-varying system, a series of Hankel matrices are established directly from the combined measurements of displacement, velocity, and acceleration together with the input excitations from a single experiment with the system. The time-varying equivalent state-space system matrices of the structure at each time instance are then identified by singular value decomposition using the free or random responses. A time-varying transformation matrix for transforming the identified equivalent system matrices into the physical system matrices is developed to determine the mass, stiffness, and damping matrices. Details of the proposed approach are investigated with a two degrees-of-freedom spring-mass-damper system with three kinds of time-varying parameters. Numerical results show that the proposed method is accurate and effective in identifying time-varying physical parameters.

: This report considers a feedback control law for linear time-varying and time invariant discrete systems based on a receding horizon concept applied to a minimum energy problem with fixed terminal constraints. The control law is shown to be asymptotically stable and to result in a new method for stabilizing linear time-varying systems as well as extending some well known methods for stabilizing time invariant systems. In particular, the stabilizing gains of the feedback control law are obtained from the solution to a discrete Riccati equation over an arbitrary finite time interval, which is relatively easy to compute. The gain matrix reduces to a constant matrix for linear time invariant systems. Some stability results will turn out to be special cases of these results. The results parallel those for linear continuous time systems, although the technical details are tedious and more involved.

An identification approach for linear and nonlinear time-variant structural systems via harmonic wavelets

Introduction. 1.1 Linear Time-Invariant Systems. 1.2 Nonlinear Systems. 1.3 Equilibrium Points. 1.4 First-Order Autonomous Nonlinear Systems. 1.5 Second-Order Systems: Phase-Plane Analysis. 1.6 Phase-Plane Analysis of Linear Time-Invariant Systems. 1.7 Phase-Plane Analysis of Nonlinear Systems. 1.8 Higher-Order Systems. 1.9 Examples of Nonlinear Systems. 1.10 Exercises. Mathematical Preliminaries. 2.1 Sets. 2.2 Metric Spaces. 2.3 Vector Spaces. 2.4 Matrices. 2.5 Basic Topology. 2.6 Sequences. 2.7 Functions. 2.8 Differentiability. 2.9 Lipschitz Continuity. 2.10 Contraction Mapping. 2.11 Solution of Differential Equations. 2.12 Exercises. Lyapunov Stability I: Autonomous Systems. 3.1 Definitions. 3.2 Positive Definite Functions. 3.3 Stability Theorems. 3.4 Examples. 3.5 Asymptotic Stability in the Large. 3.6 Positive Definite Functions Revisited. 3.7 Construction of Lyapunov Functions. 3.8 The Invariance Principle. 3.9 Region of Attraction. 3.10 Analysis of Linear Time-Invariant Systems. 3.11 Instability. 3.12 Exercises. Lyapunov Stability II: Nonautonomous Systems. 4.1 Definitions. 4.2 Positive Definite Functions. 4.3 Stability Theorems. 4.4 Proof of the Stability Theorems. 4.5 Analysis of Linear Time-Varying Systems. 4.6 Perturbation Analysis. 4.7 Converse Theorems. 4.8 Discrete-Time Systems. 4.9 Discretization. 4.10 Stability of Discrete-Time Systems. 4.11 Exercises. Feedback Systems. 5.1 Basic Feedback Stabilization. 5.2 Integrator Backstepping. 5.3 Backstepping: More General Cases. 5.4 Examples. 5.5 Exercises. Input-Output Stability. 6.1 Function Spaces. 6.2 Input-Output Stability. 6.3 Linear Time-Invariant Systems. 6.4 Lp Gains for LTI Systems. 6.5 Closed Loop Input-Output Stability. 6.6 The Small Gain Theorem. 6.7 Loop Transformations. 6.8 The Circle Criterion. 6.9 Exercises. Input-to-State Stability. 7.1 Motivation. 7.2 Definitions. 7.3 Input-to-State Stability (ISS) Theorems. 7.4 Input-to-State Stability Revisited. 7.5 Cascade Connected Systems. 7.6 Exercises. Passivity. 8.1 Power and Energy: Passive Systems. 8.2 Definitions. 8.3 Interconnections of Passivity Systems. 8.4 Stability of Feedback Interconnections. 8.5 Passivity of Linear Time-Invariant Systems. 8.6 Strictly Positive Real Rational Functions. Exercises. Dissipativity. 9.1 Dissipative Systems. 9.2 Differentiable Storage Functions. 9.3 QSR Dissipativity. 9.4 Examples. 9.5 Available Storage. 9.6 Algebraic Condition for Dissipativity. 9.7 Stability of Dissipative Systems. 9.8 Feedback Interconnections. 9.9 Nonlinear L2 Gain. 9.10 Some Remarks about Control Design. 9.11 Nonlinear L2-Gain Control. 9.12 Exercises. Feedback Linearization. 10.1 Mathematical Tools. 10.2 Input-State Linearization. 10.3 Examples. 10.4 Conditions for Input-State Linearization. 10.5 Input-Output Linearization. 10.6 The Zero Dynamics. 10.7 Conditions for Input-Output Linearization. 10.8 Exercises. Nonlinear Observers. 11.1 Observers for Linear Time-Invariant Systems. 11.2 Nonlinear Observability. 11.3 Observers with Linear Error Dynamics. 11.4 Lipschitz Systems. 11.5 Nonlinear Separation Principle. Proofs. Bibliography. List of Figures. Index.

Global stabilization of linear time-varying delay systems with bounded controls

In the case of multiple nonstationary independent source signals and linear instantaneous time-varying mixing systems, it is difficult to adaptively separate the multiple source signals. Therefore, the adaptive blind source separation (BSS) problem is firstly formally expressed and compared with tradition BSS problem. Then, we propose an adaptive blind identification and separation method based on the variable learning rate equivariant adaptive source separation via independence (EASI) algorithm. Furthermore, we analyze the scope and conditions of variable-learning rate EASI algorithm. The adaptive BSS simulation results also show that the variable learning rate EASI algorithm provides better separation effect than the fixed learning rate EASI and recursive least-squares algorithms.

For linear time-varying single-input single-output systems, the paper treats the problem of designing an output feedback controller resulting in an (internally) stable closed-loop system that tracks a given reference signal. The design is accomplished by augmenting the given system to include an internal model of the reference signal. The internal model reduces to the usual form when the given plant is time invariant. An explicit construction for the internal model is given in the case of a step reference.

Global stabilization for linear continuous time-varying systems

In this paper, adaptive optimal control is proposed for linear discrete time-varying (LDTV) systems subject to unknown system dynamics. The idea of the method is a direct application of the Q-learning adaptive dynamic programming for time-varying systems. In order to derive the optimal control policy, an actor-critic structure is constructed and the time-varying least square method is adopted for parameter adaptation. The derived control policy robustly stabilizes the time-varying system and guarantees an optimal control performance. As no particular system information is required throughout the process, the proposed method provides a feasible solution to a large variety of applications. The validity of the proposed method is verified through simulation studies.

In this paper a new systematic switching control approach to adaptive stabilization of linear time-varying (LTV) discrete-time systems is presented.A feature of the localization-based method is its high model falsification capability, which in the case of LTI systems is manifested as the rapid convergence of the switching controller.We believe that the proposed method may help pave the way for design of practical adaptive switching controllers applicable to a wide range of linear time-invariant and timevarying systems.