Variational data generative model for intrusion detection

This paper presents an overview of the technologies and the methodologies used in Network Intrusion Detection and Prevention Systems (NIDPS). Intrusion Detection and Prevention System (IDPS) technologies are differentiated by types of events that IDPSs can recognize, by types of devices that IDPSs monitor and by activity. NIDPSs monitor and analyze the streams of network packets in order to detect security incidents. The main methodology used by NIDPSs is protocol analysis. Protocol analysis requires good knowledge of the theory of the main protocols, their definition, how each protocol works.Keywords: Intrusion Detection and Prevention System, Protocol Analysis, Sensor, Signature, State(ProQuest: ... denotes formulae omitted.)1 IntroductionIncreasing size and complexity of the Internet and Intranet networks have led to increasing number of vulnerabilities that could be exploited. Thus, the internal and external attacks on the information systems are increasing at an alarming rate. Also, these are becoming more severe and sophisticated. The attackers find ingenious ways to bypass the security controls and to compromise the security and the well functioning of the information systems. They are motivated by financial, political, and military objectives. In this context, defending wide area networks from malicious traffic, unauthorized access to systems involves many problems.In security information systems Network Intrusion Detection and Prevention Systems (NIDPS) are important tools to detect possible incidents and also, to attempt to stop them in real time. Due to changing attacks, intrusion detection methodologies and technologies continuously evolve, adding new detection capabilities, to avoid detection. They must adapt to new forms of malware, to the public networks, increased traffic.2 Concepts of Intrusion DetectionAn intrusion is a successful action to gain access to an information system, to compromise it or to make it unavailable. This is possible due to the presence of vulnerability in the target system that can be exploited by a motivated intruder.Intrusion Detection and Prevention is the process of monitoring the information systems by sensors or agents and analyzing the collected information to detect and to attempt to stop the attacks in real time, identifying vulnerabilities, the violation of security policies or standard security practices.An Intrusion Detection and Prevention System (IDPS) is a tool that monitors information systems, collects, analyzes information, and initiates responses when an intrusion is detected.Intrusion Detection Systems (IDSs) mainly work as defensive mechanisms. They only alert the system administrators that an incident has occurred. Intrusion Prevention Systems (IPSs) can take some actions to attempt to stop the attack, such as breaking the connection or modifying the firewall rules to deny access to the intruder. The response of the classic IDS can be slow if the system administrator is busy while the response of the IPS is automatic. An architecture that uses together IPS and IDS technologies is the best solution for defense in depth.Conceptually, a generic IDPS consists of modular components. It mainly has the following components: monitoring system, storage, analyzer, and responder.* Monitoring system - monitors and logs the events in a computer system or network;* Storage - stores information, called audit record, about suspicious activities or intrusions; also, the security policies used in analysis are stored;* Analyzer - uses different analysis methodologies to detect the incidents;* Responder - the response mechanism of incidents.The IDPSs could be classified as:* By detection methodology [12], [18]:- misuse-based detection- anomaly-based detection- stateful protocol analysis* By activity [12]:- network-based- wireless-based- network behavior analysis- host-based* By behavior on detection:- passive- active* By collection and analysis frequency:- continuous- periodicThe detection methodologies describe the characteristics of the analyzer. …

This paper describes the ESIDE-Depian intrusion detection and prevention system, which uses Bayesian structural and parametric learning and also evidence propagation and adaptation, in order to improve the accuracy and manageability of network intrusion detection systems (NIDS). Current NIDS do not consider the two main detection paradigms, i.e. misuse detection and anomaly detection, in an unified style, so the analysis is not inherently complete. Besides, historical data are not generally used, neither for analysis nor for sequential adaptation of the knowledge representation models used for detection; hence this wealthy information about the essence and the potential trends of the target system is not commonly considered. Thus, by the generalized use of Bayesian belief networks, ESIDE-Depian achieves the main goal of detecting and preventing both well-known and also zero-day attacks with excellent results, by means of unified real-time analysis of network traffic.

Intrusion Detection System (IDS) is a device or software application that monitors and inspects all inbound and outbound network activities, identifies suspicious patterns that may be a network attack from someone attempting to break into or compromise a system. IDS categorize in two ways, namely misuse detection and anomaly detection. In this research, intrusion detection was done by anomaly detection. The data used is KDDCUP dataset 1999, which has 4 types of attacks, namely DoS, U2R, R2L, and Prob. Anomaly detection was built using Backpropagation algorithm optimized by Conjugate Gradient algorithm. In this paper, it was implemented and analyzed the use of CG optimization (Fletcher Reeves, Polak Ribiere, Powell Beale) in the process of backpropagation learning for IDS. Moreover, to minimize the performance of learning rate parameter, four types of line search techniques used, i.e. Brent Search, Golden Section Search, Charalambous Search and Hybrid Bisection-cubic Search. Based on the experiment results, the proposed scheme gives the best accuracy when the data is divided into two classes with a proportion of normal and intrusion data was balanced, with an average accuracy of 93.2%. Meanwhile, the multi class classification model has an average f-measure of 54.13%. The best performance was obtained by using Conjugate Gradient-Fletcher Reeves optimization method and line search method Hybrid Bisection-Cubic Search.

Many network security applications such as Intrusion Detection System (IDS), Firewall and Data Loss Prevention System (DLPS) are based on deep packet inspection, in this packets header as well as payload of the packets are checked with predefined attack signature to identify whether it contains malicious traffic or not. To perform this checking different pattern matching methods are used by NIDS. The most popular method to implement pattern matching is to use of Finite Automata (FA). Generally, regular expressions are used to represent most of the attack signatures defined by NIDS. They are implemented using finite automata, which takes the payload of packet as input string. However, existing approaches of Finite Automata (FA), both deterministic finite automata (DFA) and non-deterministic finite automata (NFA) for pattern matching are having their own advantages and some drawbacks. The DFA based pattern matching methods are fast enough but require more memory. However, NFA based pattern matching methods are comparatively takes less memory but the speed of matching is very slow, to overcome these drawbacks of finite automata there are many approaches have been proposed. This paper discuses comparative study of some Finite Automata (FA) based techniques for pattern matching in network intrusion detection system (NIDS).

As the reliance on digital networks grows, the need for robust security measures becomes paramount. It offers a thorough analysis of creating and assessing a Network Intrusion Detection System (NIDS) incorporating various machine learning algorithms. The selected algorithms consist of K Nearest Neighbour, Naïve Bayes, Decision Tree, Support Vector Machine, and Logistic Regression. Moreover, widely recognised ensemble learning models like CatBoost, AdaBoost, Gradient Boost, Random Forest, and Extreme Gradient Boost. The core objective is to improve the efficiency of intrusion detection by evaluating various machine-learning models. Utilizes feature selection techniques based on chi-square to enhance the relevance and effectiveness of the selected features. The evaluation metrics, particularly Matthews’ Correlation Coefficient (MCC) and ROC Curves, are used in assessing the models’ efficacy. They offer valuable insights into the models’ capability to differentiate between normal and malicious network activities. This study aims to advance cybersecurity by comparing classical machine learning and ensemble models for network intrusion detection. Significantly, our results underscore XGBoost’s effectiveness with 0.996 accuracy and 0.993 MCC, in enhancing digital network security.

The purpose of a Network Intrusion Detection System is to detect intrusive, malicious activities or policy violations in a host or host’s network. In current networks, such systems are becoming more important as the number and variety of attacks increase along with the volume and sensitiveness of the information exchanged. This is of particular interest to Internet of Things networks, where an intrusion detection system will be critical as its economic importance continues to grow, making it the focus of future intrusion attacks. In this work, we propose a new network intrusion detection method that is appropriate for an Internet of Things network. The proposed method is based on a conditional variational autoencoder with a specific architecture that integrates the intrusion labels inside the decoder layers. The proposed method is less complex than other unsupervised methods based on a variational autoencoder and it provides better classification results than other familiar classifiers. More important, the method can perform feature reconstruction, that is, it is able to recover missing features from incomplete training datasets. We demonstrate that the reconstruction accuracy is very high, even for categorical features with a high number of distinct values. This work is unique in the network intrusion detection field, presenting the first application of a conditional variational autoencoder and providing the first algorithm to perform feature recovery.

Deep learning-based feature extraction and optimizing pattern matching for intrusion detection using finite state machine

Network intrusion detection system (NIDS) is a tool that can detect various network attacks by analyzing network traffic. In recent years, traditional machine learning and deep learning methods have been widely used in NIDS. And these works achieved high detection rate and low false positive rate when identifying common attacks (such as DoS). However, the existing models performed poor in detecting rare or unseen network attacks. In this paper, we design a novel network intrusion detection model based on two-phase detection and manually labeling. This two-phase detection model (TPDM) is a multi-classification system, and it can classify network traffic into benign or specific attack type. TPDM gains the overall accuracy 98.35%, and average F1-score 99.23% on UNSW-NB15 dataset. The experiment shows that TPDM performs better than state of the art in detecting rare attacks with few training samples. Besides, it can detect unknown network attacks and then label these attacks.

The rapid expansion of internet-based services has significantly increased global connectivity while simultaneously exposing network systems to advanced cyber threats. To address these challenges, NetworkIntrusion Detection Systems (NIDS) have emerged as intelligent, machine learning–based solutions for real-time monitoring and protection of network traffic. Thesesystems are trained on large datasets containing both normal and malicious activity patterns to build predictive models capable of identifying potential attacks. However,the effectiveness of such systems depends on the accuracy and efficiency of the underlying algorithms. This study focuses on comparing two widely used supervised learning techniques, Support Vector Machines (SVM) and Artificial Neural Networks (ANN), to enhance intrusion detection performance. By evaluating their classification capabilities, the study demonstrates that ANN provides superior accuracy and more robust threat detection, thereby improving the reliability and effectiveness of modern cybersecurity systems. Keywords:Network Intrusion Detection System (NIDS),cybersecurity, machine learning, Support Vector Machine (SVM), Artificial Neural Network (ANN), anomaly detection, network security, real-time monitoring, attack detection, predictive modeling, data-driven security.

Network intrusion detection system is a significant guarantee means for network security. However, the current network intrusion detection system generally suffers from less prior knowledge which then leads to poor generalizing ability. Network intrusion detection system based on support vector machine is endowed with favorable generalizing ability even with small sample size (less prior knowledge). The paper first gives an introduction to the basic concept of intrusion detection and the basic principle of the classifier based on support vector machine, then discusses algorithm of support vector machine, and finally forms network intrusion detection system combining anomaly intrusion detection and misuse intrusion detection, based on support vector machine.

Network intrusion detection systems (NIDS) are essential for protecting computer networks against cyberattacks. The selection of a nominal set of essential features that may adequately discriminate malicious traffic from normal traffic is indispensable while developing a NIDS. As such, a more reliable and accurate detection result may be realized when intrusion detection is carried out on a dataset based on an inclusive feature representation. This work presents the pre-processing and feature selection workflow as well as its results in the case of the CIC-IDS-2017 dataset, with a focus on two cyber-attacks, namely Denial-of-Service (DoS) and PortScan. The study applied an ensemble feature selection method based on information gain and Random Forest to filter out important features. Recursive Feature Elimination method was then applied to the reduced features to optimize the selected feature subset. The selected feature subset was experimented with using two classification algorithms, namely support vector machine and multi-layer perceptron. In the evaluation process, four widely used performance metrics were considered. The study results demonstrated the efficacy of the proposed ensemble approach to optimize the selected feature subset for detecting PortScan and DoS attacks in network traffic. Experimental results revealed that the support vector machine had a slight advantage in accuracy and could train more quickly. According to the study's evaluation, the NIDS may be able to shorten processing times without sacrificing the ability to detect PortScan and DoS attacks accurately by choosing a narrow subset of informative features. This suggests the approach might be applicable to real-world NIDS scenarios involving these attacks. The study also provides encouraging perspectives on how ensemble feature selection utilizing MLP and SVM can enhance the effectiveness of NIDS. Building on these findings, more research can create NIDS solutions that are even more reliable and efficient for the dynamic field of cybersecurity.

Traditional Network Intrusion Detection Systems (NIDSes) are generally implemented on vendor proprietary appliances or middleboxes with poor versatility and flexibility. Emerging Network Function Virtualization (NFV) and Software-Defined Networking (SDN) technologies can virtualize NIDSes and elastically scale them to deal with attack traffic variations. However, such an elasticity feature must not come at the cost of decreased detection effectiveness and expensive provisioning. In this paper, we propose an innovative NIDS architecture, vNIDS, to enable safe and efficient virtualization of NIDSes. vNIDS addresses two key challenges with respect to effective intrusion detection and non-monolithic NIDS provisioning in virtualizing NIDSes. The former challenge is addressed by detection state sharing while minimizing the sharing overhead in virtualized environments. In particular, static program analysis is employed to determine which detection states need to be shared. vNIDS addresses the latter challenge by provisioning virtual NIDSes as microservices and employing program slicing to partition the detection logic programs so that they can be executed by each microservice separately. We implement a prototype of vNIDS to demonstrate the feasibility of our approach. Our evaluation results show that vNIDS could offer both effective intrusion detection and efficient provisioning for NIDS virtualization.

The security of the Industrial Internet of Things (IIoT) is of vital importance, and the Network Intrusion Detection System (NIDS) plays an indispensable role in this. Although there is an increasing number of studies on the use of deep learning technology to achieve network intrusion detection, the limited local data of the device may lead to poor model performance because deep learning requires large-scale datasets for training. Some solutions propose to centralize the local datasets of devices for deep learning training, but this may involve user privacy issues. To address these challenges, this study proposes a novel federated learning (FL)-based approach aimed at improving the accuracy of network intrusion detection while ensuring data privacy protection. This research combines convolutional neural networks with attention mechanisms to develop a new deep learning intrusion detection model specifically designed for the IIoT. Additionally, variational autoencoders are incorporated to enhance data privacy protection. Furthermore, an FL framework enables multiple IIoT clients to jointly train a shared intrusion detection model without sharing their raw data. This strategy significantly improves the model's detection capability while effectively addressing data privacy and security issues. To validate the effectiveness of the proposed method, a series of experiments were conducted on a real-world Internet of Things (IoT) network intrusion dataset. The experimental results demonstrate that our model and FL approach significantly improve key performance metrics such as detection accuracy, precision, and false-positive rate (FPR) compared to traditional local training methods and existing models.

With a paradigm shift to untact environments, security threats on the network also have been significantly increasing all over the world. To monitor and detect intrusion attempts under enormous network traffic, Security Operation Center (SOC) essentially exploits various security devices. Above all, Network Intrusion Detection System (NIDS) has been operated in public/private sectors as a spearhead to fight against cyber threats. In particular, state-of-the-art technologies, especially ML and AI, have been being studied to achieve quick and accurate intrusion detection. Despite much effort to guarantee a secure network, however, SOCs are still struggling for overcoming various types of threats as well as attacks of similar form with benign traffic. Even though the advanced techniques may find out a complex and unknown attack, operating and managing them in real-world situations cause counterproductively more pressure to agents in the SOC. In order to solve these difficulties, this study introduces an easy-to-use framework to build intrusion detection models based on AI techniques, as well as to operate them depending on a situation using a graphical user interface. The framework supports generating various types of AI- and ML-based intrusion detection models with optimized parameters by only a few steps. Furthermore, an interactive graphical interface makes it easier to manage detection models according to different threat situations. Finally, the performance of models made by the framework is evaluated in terms of accuracy, especially under the real-world SOC environment with live network traffic.

In this paper the software system for network traffic analysis and intrusion detection has been developed. The system for monitoring and analyzing of traffic to detect anomalies and identify attacks based on Hurst parameter has been proposed. This system allows determining the Hurst flow parameter at different intervals of observation. This system can be installed on the network provider to more effectively use the bandwidth by balancing the load between different protocols and subscribers.