Vibration-based Structural Damage Detection Using Twin Gaussian Process (TGP)

An efficient method utilizing the multi-stage improved differential evolution algorithm (MSIDEA) as an optimization solver is presented here to detect the multiple-damage of structural systems. Natural frequency changes of a structure are considered as a criterion for damage occurrence. The structural damage detection problem is first transmuted into a standard optimization problem dealing with continuous variables, and then the MSIDEA is utilized to solve the optimization problem for finding the site and severity of structural damage. In order to assess the performance of the proposed method for damage identification, an experimental study and two numerical examples with considering measurement noise are considered. All the results demonstrate the effectiveness of the proposed method for accurately determining the site and severity of multiple-damage. Also, the performance of the MSIDEA for damage detection compared to the standard differential evolution algorithm (DEA) is confirmed by test examples.

A multi-stage gravitational search algorithm (MSGSA) is proposed here to solve the optimization-based damage detection of structural systems. Natural frequency changes of a structure are considered as a criterion for damage occurrence. Finite element method and structural dynamic principles are also employed to evaluate the required natural frequencies. The structural damage detection problem is first transformed into a standard optimization problem dealing with continuous variables, and then the MSGSA is utilized to solve the optimization problem for finding the site and severity of damage. In order to assess the performance of the proposed method for damage identification, an example with experimental data and two numerical examples with considering measurement noise are considered. All the results demonstrate the effectiveness of the proposed method for accurately determining the site and extent of multiple structural damage. Also, the performance of the MSGSA for damage detection compared to the standard gravitational search algorithm (GSA) is confirmed by examples.

In the present paper, Structural health monitoring has become an evolving area of research in last few decades with increasing need of online monitoring the health of large structures. The damage detection by visual inspection of the structure can prove impractical, expensive and ineffective in case of large structures like offshore platforms, multistoried buildings and bridges. Structural health monitoring is defined as the process of detecting damage in a structural system. Damage in the system causes a change in dynamic properties of a system. The structural damage is typically a local phenomenon, which tends to be captured by higher frequency signals. Most of vibration-based damage detection methods require the modal properties that are obtained from measured signals through the system identification techniques. However, the modal properties such as natural frequencies and mode shapes are not such a good sensitive indication of structural damage. Structural damage detection and damage localization of jacket platforms, based on wavelet packet transforms is presented in this paper. Dynamic signals measured from the structure by the finite element software package ANSYS are first decomposed into wavelet packet components. Component energies are then calculated and used for damage assessment. The results show that the WPT-based component energies are good candidate indices that are sensitive to structural damage. These component energies can be used for damage assessment including identifying damage occurrence and location.

Two-stage structural damage detection using fuzzy neural networks and data fusion techniques

Nowadays, structural health monitoring has attracted much attention, due to the construction of important and complex structures and their safety. One branch of structural health monitoring is damage detection, estimating the location and extent of eventual damages in the structural systems. In this study, an efficient method is introduced to determine the location and extent of damage in the frame, beam and truss structures using time domain response and an optimization algorithm. First of all, the structural damage detection problem is formulated as a standard optimization problem. So that, the optimization objective function is defined by using the acceleration of damaged structures and analytical model acceleration. The acceleration is obtained using Newmark method. Damage is simulated by reducing the elasticity modulus of structural members. Then, damage problem converted to an optimization problem are solved by teaching–learning-based optimization (TLBO) algorithm therefore, the exact location and extent of damage in structure can be determined. In order to show the capabilities of the proposed approach for identifying structural damage, four illustrative test examples are considered with considering measurement noise effect. The results clearly show that the proposed method is as a powerful method to detect multiple damage in structures.

The representation of structural dynamics in the absence of physics-based models, is often accomplished through the identification of parametric models, such as the autoregressive with exogenous inputs, e.g. ARX models. When the structure is amenable to environmental variations, parameter-varying extensions of the original ARX model can be implemented, allowing for tracking of the operational variability. Yet, the latter occurs in sufficiently longer time-scales (days, weeks, months), as compared to system dynamics. For inferring a “global”, long time-scale varying ARX model, data from a full operational cycle has to typically become available. In addition, when the sensor network comprises multiple nodes, the identification of long time-scale varying, vector ARX models grow in complexity. We address these issues by proposing a distributed framework for structural identification, damage detection and localization. Its main features are: (i) the individual estimation of local, single-input-single-output ARX models at every operational point; (ii) the long time-scale representation of each individual ARX coefficient via a Gaussian process regression, which captures dependency on varying Environmental and Operational Conditions (EOCs); (iii) the establishment of a distributed residual generation algorithm for damage detection, which produces time-series of well-defined stationary statistics, with detected discrepancies used for damage diagnosis; and, (iv) exploitation of ARX-inferred mode shape curvatures, obtained via ARX-inferred global state-space models, of the healthy and damaged states, for damage localization. The method is assessed via application on two numerical case studies of different complexity, with the results confirming its efficacy for diagnostics under varying EOCs.

As sensor monitoring technology continues to evolve, structural online monitoring and health management have found numerous applications across various fields. However, challenges remain concerning the real-time diagnosis of structural damage and the accuracy of dynamic reliability predictions. In this paper, a structural online damage identification and dynamic reliability prediction method based on Unscented Kalman Filter (UKF) is presented. Specifically, in the Wiener degradation process with random effects on structural performance, the structural damage identification is initially realized using UKF. Following that, the EM algorithm is employed for estimating the performance model parameters. Eventually, dynamic reliability prediction is realized based on conditional probability. The simulation results indicate that the method effectively estimates the damage state during the structure’s use while providing accurate, real-time, and dynamic reliability predictions for the system.

Need for developing efficient non-destructive damage detection procedures for civil engineering structures is growing rapidly. This paper presents a methodology for detection and quantification of structural damage using modal information obtained from transfer matrix technique. Vibration characteristics of beam-like structure have been determined using the computer program developed based on the formulations presented in the paper. It has been noted from reported literature that detection and quantification of damage using mode shape information is difficult and further, extraction of mode shape information has practical difficulties and limitations. Hence, a methodology for detection and quantification of damage in structure using tranfer matrix technique based on the changes in the natural frequencies has been developed. With an assumption of damage at a particular segment of the beam-like structure, an iterative procedure has been formulated to converge the calculated and measured frequencies by adjusting flexural rigidity of elements and then, the intersections are used for detection and quantification of damage. Eventhough the developed methodology is iterative, computational effort is reduced considerably by using transfer matrix technique. It is observed that the methodology is capable of predicting the location and magnitude of damage quite accurately.

Transmissibility of non-linear output frequency response functions with application in detection and location of damage in MDOF structural systems

Structural health monitoring is a discipline dedicated to the detection, identification, location and quantification of damage in structures based on performance indicators. Given the aim of the discipline, non-destructive method for data acquisition are always preferred. One such method is vibration-based testing, with which this work concerns itself. There has been widespread use of both machine learning applications when dealing with vibration data and use of computer vision-oriented machine learning models with pictures of the studied structure in order to address the concerns of structural health monitoring applications; this work propose a combination of the two. Since there are many pre-trained models for computer vision-oriented applications, this work successfully proposes a method for harnessing such models for processing of vibrational data through the use of transfer learning methodologies and finite element models. This can be achieved thanks to the visual nature of the Complex Frequency Domain Assurance Criterion (CFDAC) matrix, which can be obtained from vibrational data.

Genetic fuzzy system for damage detection in beams and helicopter rotor blades

Long-gauge fiber Bragg grating strain sensors have been widely employed because of their broader measuring range and higher sensitivity. However, current structural damage detection methods using macro-strain modal parameters are based on structural frequency response function or stationary power spectrum density, which are not applicable to non-stationary responses. To overcome this limitation, an improved method is proposed in this paper for structural damage detection based on structural macro-strain responses under unknown multi-point non-stationary excitations. First, a new concept of macro-strain energy spectrum transmissibility (MEST) is proposed using structural non-stationary macro-strain responses, and it is derived that MEST at a certain system pole equals the ratio of macro-strain mode shape. Then, the singular value decomposition technique is adopted for the MEST matrix to identify structural natural frequencies and macro-strain mode shapes. Finally, two damage detection indicators are constructed based on the identified normalized macro-strain mode shape (NMMS). The first indicator is the difference in structural NMMS before and after structural damage. The second one is based on the curvatures of structural NMMS, which can be used for structures without intact baseline. Numerical verifications are conducted to identify beam-type structural damage under multi-point non-stationary excitations or vehicle loads. Five damage scenarios with different measurement noise levels are investigated, and damage detection results validate the effectiveness of the proposed method.

Purpose Aiming at the problems of high cost, high risk and traffic impact of in situ load testing of Bridges after fire, this paper proposes a fire bridge structural damage identification method based on a fire dynamics simulator (FDS)-Kriging model modification and a unit modal strain energy damage index, so as to effectively assess the damage of bridge structures after fire. Determine whether it can continue to be used and whether it affects driving safety. Design/methodology/approach Propose a fire bridge structural damage identification method to establish the FDS-Kriging model correction. Findings The finite element model of the fire bridge modified using FDS-Kriging approach can reflect the actual situation of the bridge structure more accurately, and the damage location and degree identified by the modal strain energy method are consistent with the actual bridge. Therefore, the effectiveness of the proposed method has been verified, and a new strategy for fire bridge damage identification has been provided. Research demonstrates that the finite element model of the fire-damaged bridge, modified using the FDS-Kriging method, can more accurately reflect the actual structural state. Moreover, the damage location and severity identified via the modal strain energy method align well with the actual bridge conditions. Thus, the effectiveness and engineering applicability of the proposed method are validated, offering a comprehensive new strategy and technical support for the integrated performance evaluation, damage identification and reliability analysis of fire-damaged bridges. Originality/value By determining the finite element correction interval and combining it with the Kriging model, the method realizes the fine correction of the finite element model of the fire bridge. Structural damage identification is carried out by using the unit modal strain energy damage index. This verifies the effectiveness and engineering applicability of the proposed method, which offers a novel approach and technical support for the comprehensive performance evaluation, damage identification and reliability analysis of fire-damaged bridges.

This study proposes a novel strategy for damage identification in aircraft structures. The strategy was evaluated based on the simulation of the binary data generated from self-powered wireless sensors employing a pulse switching architecture. The energy-aware pulse switching communication protocol uses single pulses instead of multi-bit packets for information delivery resulting in discrete binary data. A system employing this energy-efficient technology requires dealing with time-delayed binary data due to the management of power budgets for sensing and communication. This paper presents an intelligent machine-learning framework based on combination of the low-rank matrix decomposition and pattern recognition (PR) methods. Further, data fusion is employed as part of the machine-learning framework to take into account the effect of data time delay on its interpretation. Simulated time-delayed binary data from self-powered sensors was used to determine damage indicator variables. Performance and accuracy of the damage detection strategy was examined and tested for the case of an aircraft horizontal stabilizer. Damage states were simulated on a finite element model by reducing stiffness in a region of the stabilizer's skin. The proposed strategy shows satisfactory performance to identify the presence and location of the damage, even with noisy and incomplete data. It is concluded that PR is a promising machine-learning algorithm for damage detection for time-delayed binary data from novel self-powered wireless sensors.

This paper proposes a novel structural damage identification approach by modifying the original Tree Seeds Algorithm (TSA), termed as M-TSA. To enhance the performance of the standard TSA, a one-step K-means clustering mechanism is conducted before starting the seeds search, which turns out to be beneficial to improve the standard algorithm’s global search capacity. The objective function is formulated by using the frequency do-main data. The first several natural frequencies and the incomplete mode shape are employed to build up the objective function and the proposed M-TSA is adopted to obtain the optimal solution and reflect the structure’s health status. Numerical studies on a 26-bar truss are conducted to investigate the accuracy of using the proposed approach for structural damage identification. Two types of uncertainties including the finite element modelling errors and measurements noise, are considered simultaneously. The final identification results show that with the assistance of the K-means clustering, the proposed M-TSA is able to identify the damages accurately and the performance is better than the standard TSA.