Virtual Reality System Specifications for Pain Management Therapy

With the rapid development of science and technology, virtual reality (VR) systems have developed rapidly. VR systems can be applied in many fields such as education, medical, military, and probing. According to the survey, the VR system will have a delay in the process of acquisition, transmission and processing, and more than 40% of the human body will have motion sickness after experiencing VR. The cause of motion sickness is delay. Accurate measurement of delays therefore helps to resolve motion sickness in the virtual world and provides guidance for the upgrade of these systems. In response to the existing problems, our research team designed a low-cost, high-performance experimental equipment that uses a single-chip microcomputer and a PIN photodiode as the hardware core of the delay detection device. The light intensity changes are used to determine the start and end of the detection. The algorithm calculates the delay time of the VR device.

Patients undergoing Magnetic Resonance Imaging (MRI) often experience anxiety and sometimes distress prior to and during scanning. Here a full MRI compatible virtual reality (VR) system is described and tested with the aim of creating a radically different experience. Potential benefits could accrue from the strong sense of immersion that can be created with VR, which could create sense experiences designed to avoid the perception of being enclosed and could also provide new modes of diversion and interaction that could make even lengthy MRI examinations much less challenging. Most current VR systems rely on head mounted displays combined with head motion tracking to achieve and maintain a visceral sense of a tangible virtual world, but this technology and approach encourages physical motion, which would be unacceptable and could be physically incompatible for MRI. The proposed VR system uses gaze tracking to control and interact with a virtual world. MRI compatible cameras are used to allow real time eye tracking and robust gaze tracking is achieved through an adaptive calibration strategy in which each successive VR interaction initiated by the subject updates the gaze estimation model. A dedicated VR framework has been developed including a rich virtual world and gaze-controlled game content. To aid in achieving immersive experiences physical sensations, including noise, vibration and proprioception associated with patient table movements, have been made congruent with the presented virtual scene. A live video link allows subject-carer interaction, projecting a supportive presence into the virtual world.

Extended-Reality Technologies: An Overview of Emerging Applications in Medical Education and Clinical Care.

In order to improve the efficiency of information acquisition and task selection in Virtual Reality (VR) systems, enhance the interactive experience, and reduce cognitive load for users, it is crucial to effectively organize and leverage user cognitive psychology and design elements during the VR scene design phase. This paper focuses on analyzing the low cognitive load requirements of users and the need for a satisfactory user perceptual experience based on the cognitive resource theory. We propose a method for optimizing the design of VR system scenario tasks under low cognitive load requirements. By utilizing human-computer hybrid intelligent assistance for predicting user cognitive load and incorporating intelligent optimization genetic algorithms into the optimization of VR system design elements, we aim to minimize cognitive load as the objective function based on the principle of low cognitive load. Important knowledge granularity nodes are used as fitness functions in the optimization process of VR system design resource elements. An application study is conducted, combining the multi-channel cognition in a smart city VR system task information interface, to optimize the system resource features. The study validates and compares the solutions obtained through traditional design processes and the solutions optimized by the method proposed in this paper, using virtual reality eye-tracking experiments for the same design task requirements in VR systems. The results demonstrate that users experience lower cognitive load and better task operation experience when interacting with the optimized solutions proposed in this paper. Therefore, the optimization method studied in this paper can serve as a reference for the construction of virtual reality systems.

This paper describes a study aimed at developing and applying a method for comparing the user experience (UX) of virtual reality (VR) systems, in order to identify aspects that differentiate VR systems from a user perspective as well as aspects that users consider important when selecting a VR system. A within-subjects study was conducted, in which twelve participants played a VR game using four different VR systems (i.e., VR headsets and hand controllers). The UX was evaluated through semi-structured interviews and questionnaires. Headset comfort, fit, and perceived image quality as well as unrestricted mobility (i.e., untethered headsets) were identified as important aspects for the UX. Hand controllers that allowed more natural interaction were generally preferred. Image sharpness and headset comfort were considered the most important aspects for selecting a VR system. The study demonstrated that the method can be applied and generate insights into the UX of VR systems.

Background and Purpose: Repetitive practice improves function and facilitates cortical plasticity after stroke. Virtual reality (VR) systems have the potential to provide motivating and safe repetitive practice with minimal supervision. The purpose of this case study is to look at the effect of a VR system, activated by surface electromyography of dorsiflexors and plantarflexors, on gait velocity, function, and kinematics. Method: The first person randomized to the treatment group of a larger study was chosen for this case. She was 51 years old and 9 months poststroke. She received treatment 3 times per week for 8 weeks. Each 60-minute session consisted of both structured lower extremity exercise and VR ankle activities. Results: After intervention, the subject demonstrated increased gait speed and decreased time to perform the modified Emory Functional Ambulation Profile. Gait kinematics demonstrated improved ankle motion and plantarflexion moments at push off. Discussion: The improved gait speed, possibly due to increased ankle plantarflexion motion and moments, resulted in a more normalized trailing limb posture. This case study suggests that ankle to computer VR systems may help stroke patients improve gait function. This VR system has potential as an adjunctive therapy or home program requiring minimal supervision.

A wide variety of techniques for manipulating 3D objects in VR (Virtual Reality) systems have been implemented recently. But the shortcomings of the present interaction devices limit the types of manipulation that the user can perform in the virtual world. In this paper an interaction device that enables the user to interact with the virtual environment with different gestures is presented. By measuring the joint angles of the individual fingers with fiber optic sensors and tracking the relative position and orientation of the palm with AC (Alternating Current) pulsed magnetic tracker, the proposed interaction device can track an enormous variety of gestures and give the VR system remarkably rich expressive power. The relationship between the output of the fiber optic sensor and the actual flexure angle is studied. A digital phase sensitive detector is constructed and an iteration algorithm is used to extract the amplitudes of the received signals of the magnetoresistive sensors. The algorithm to calculate the spherical coordinates from the output of the accelerometers and magnetoresistive sensors is deducted. The design of the proposed interaction device and the experiment result are also presented.

PurposeEmerging technologies, such as virtual reality (VR), have been influencing both the tourism supply side and tourists alike. The purpose of this study is to analyse VR research in tourism and to provide a comprehensive state-of-the-art review. As the technological connotation of the term VR has been changing and encompasses various VR systems with different capabilities, this paper aims to provide a systematic and structured overview. The overall objective of this paper is to contribute to a thorough understanding of VR research in tourism.Design/methodology/approachThis paper comprehensively reviews and analyses existing literature on VR in tourism, published from 1994 to February 2018. Using a wide variety of sources, these papers were examined so as to give a state-of-the-art literature review and to deepen one’s understanding of the diverse applications of VR in a tourism context. This paper also presents a novel classification of different VR systems according to the level of immersion and depicts their respective technological capabilities.FindingsThe advent of new VR hardware necessitates a distinction for different VR systems applied in the tourism sector. Research conducted during the past three years has been focussing on the application of head-mounted displays, which reflects the temporal development of VR technology. Regardless of the VR system, most studies examine VR as a marketing tool for promotion and communication purposes during the pre-travel phase, focussing on behavioural aspects. Advances in technology will yield new opportunities and application possibilities for the tourism industry.Originality/valueThe key contribution of this paper lies in its structural approach, which differentiates between non-, semi- and fully immersive VR systems in tourism, as well as the proposition of respective definitions. The concluding part of the paper proposes practical implications for tourism businesses together with directions for future studies.

Digital restoration of fragmentary human skeletal remains: Testing the feasibility of virtual reality

Virtual Reality Approaches for Immersive Design

The evolution of Virtual Reality (VR) technology has contributed in all fields, including psychology. This evolution involves improvements in hardware and software allowing more immersive experiences. In a VR environment users can perceive the sensation of presence and feel immersed. These sensations are possible using VR devices as HMDs. Nowadays, the development of the HMDs has focused on improving their technical features to offer full immersion. In psychology, VR environments are research tools because they allow the use of new paradigms that are not possible to employ in a real environment. There are some applications for assessing spatial memory that use basic methods of HCI. However, VR systems that incorporate stereoscopy and physical movement have not yet been exploited in psychology. In this thesis, a novel VR system combining immersive, interactive and motion features was developed. This system was used for the assessment of the spatial memory and the evaluation of depth perception. For this system, a virtual maze task was designed and implemented. In this system, two different types of interaction were integrated: a locomotion-based interaction pedaling a fixed bicycle (condition1), and a stationary interaction using a gamepad (condition2). This system integrated two types of display systems: 1) The Oculus Rift; 2) A large stereo screen. Two studies were designed to determine the efficacy of the VR system using physical movement and immersion. The first study (N=89) assessed the spatial short term memory using the Oculus Rift and the two types of interaction The results showed that there were statistically significant differences between both conditions. The participants who performed the condition2 got better performance than participants who performed the condition1. However, there were no statistically significant differences in satisfaction and interaction scores between both conditions. The performance on the task correlated with the performance on other classical neuropsychological tests, revealing a verisimilitude between them. The second study (N=59) involved participants who had and who had not stereopsis. This study assessed the depth perception by comparing the two display systems. The participants performed the task using the condition2. The results showed that the different features of the display system did not influence the performance on the task between the participants with and without stereopsis. Statistically significant differences were found in favor of the HMD between the two conditions and between the two groups of participants regard to depth perception. The participants who did not have stereopsis and could not perceive the depth when they used other display systems (e.g. CAVE); however, they had the illusion of depth perception when they used the Oculus Rift. The study suggests that for the people who did not have stereopsis, the head tracking largely influences the 3D experience. The statistical results of both studies have proven that the VR system developed for this research is an appropriate tool to assess the spatial short-term memory and the depth perception. Therefore, the VR systems that combine full immersion, interaction and movement can be a helpful tool for the assessment of human cognitive processes as the memory. General conclusions from these studies are: 1) The VR technology and immersion provided by current HMDs are appropriate tools for psychological applications, in particular, the assessment of spatial short-term memory; 2) A VR system like the one presented in this thesis could be used as a tool to assess or train adults in skills related to spatial short-term memory; 3) The two types of interaction (condition1 and condition2) used for navigation within the virtual maze could be helpful to use with different collectives; 4) The Oculus Rift allows that the users without stereopsis can perceive the depth perception of 3D objects and have rich 3D experiences.

Generally, a virtual reality (VR) system cannot provide the realistic sound formed by the multi-channel audio signals to a user with the stereo headphone environment. In addition, the VR system has a gap between the visual scene and the sound because it supplies the audio signal having only a constant sound scene without respect to the change of the user's position. To solve these problems, we introduce the sound scene control of binaural sound. Binaural sound is a stereo realistic sound that can be generated by convolving a 10.1 channel audio signal with a head related transfer function (HRTF) coefficients which features all the paths from the multi-channel speaker layout to the ears in free space. However, since a binaural sound is generated using a fixed multi-channel layout and HRTF coefficients, the binaural sound has a constant sound scene and cannot reflect the user's movements. So, we apply the sound scene control scheme that modifies the binaural sound to allow the user's movement in the VR system. Initially, a multichannel layout is re-created according to the user's azimuth change and the original multi-channel signal is mapped to a new ultra multi-channel layout using a constant power panning law. Secondly, the sound level of the new multichannel audio signal is controlled by the user's distance change, using the characteristics of the sound level inversely proportional to distance. Finally, the final multi-channel audio signal is convolved with the HRTF coefficients to produce a binaural sound with the controlled sound scene. As a result, the proposed realistic audio sound generation method allows the current VR system to provide true VR service without distinction between the visual scenes and sounds.

There still lacks a collaborative framework that integrates existing and new virtual reality systems supporting remote collaboration for data visualization. The collaborative framework currently available might limit the collaborators for collaboration because it is not developed to support interaction with diverse 3D applications while using heterogeneous virtual reality (VR) systems remotely in a synchronized way. We will present our collaborative framework that supports remote collaboration across heterogeneous VR systems to interact with multiple 3D applications. This system is independent of any VR systems and can be used to interact collaboratively in real-time on a shared task. Additionally, we conducted a pilot study to gain perspective on the usability of the system for collaborative work across heterogeneous VR systems. We will present the results on the usability of the system, and the results obtained from the users are motivating and encouraging. Our system has the potential to increase task effectiveness and workflow because it enables shared and real-time interaction while remotely collaborating with diverse 3D applications across heterogeneous VR systems.

The Reality of Virtual Reality in Echocardiography Education?

Introduction: Using our own hands allows humans to interact with the real world, as we learn from an early age. Virtual reality (VR) gloves allow a similar interaction in VR by transferring hand movements through natural mapping. Research outside the VR domain has already shown that this process creates a high level of presence and perceived naturalness. Research in the VR context, on the other hand, is still in an early stage and lacks explorative qualitative research following a human-centered approach and including the direct perceptions of users on mapped controls in system design. Against that background, this research investigates natural mapping in the VR context qualitatively. The study examines how participants experience VR input devices with different degrees of natural mapping (VR gloves, a Valve index controller, and an HTC Vive controller) on perceived naturalness, spatial presence, embodiment, and cognitive absorption.Methods: A focus group (N = 20 aged 22–36) did the VR experience with the devices and was asked about their experience in semi-structured interviews. Questions focused on perceived naturalness, spatial presence, cognitive absorption, and embodiment with the three devices. Data were analyzed using qualitative content analysis.Results: Feedback on spatial presence was widely positive for the VR glove due to the highly natural perceived movement capabilities. Mapping with the partly mapped index controller was also seen as natural and immersing if the movement matched the operated actions in the system. Participants mainly perceived the highest degree of cognitive absorption and embodiment while doing the task with the VR glove.Discussion: The findings indicate that the natural mapping capabilities of VR input devices strongly influence spatial presence. The VR glove stands out while being able to induce a feeling of embodiment in most cases. Furthermore, participants reported a connection between natural mapping and perceived cognitive absorption in the task.