Vivid: Augmenting Vision-Based Indoor Navigation System With Edge Computing

Novel weighted ensemble classifier for smartphone based indoor localization

High-precision indoor localization systems (ILSs) are critical for applications such as human smartphone navigation, autonomous robotics and automated warehouse and factory design. This paper presents a novel fingerprinting-based ILS, which features a decimeter-level localization accuracy, the ability to function in a constantly changing non line-of-sight (NLoS) environment, and user privacy protection without the need for heavy computations. The proposed ILS is able to maintain its localization accuracy in a constantly changing environment and to camouflage the user’s location by leveraging multipath propagation. The method was successfully tested both by experimental verification using the ultra-wideband communication standard and a ray-tracing simulation. An average localization error of 6 cm is demonstrated for a stationary or slow-moving receiver. An average error of 30 cm is demonstrated for a receiver that is moving at a fast walking pace. The obtained localization accuracy is comparable to the accuracy of the state-of-the-art localization algorithms. At the same time, the proposed approach solves two practical challenges faced by ILSs: robustness to changing environments with moving objects and the high computation requirements of user privacy protection. The high degree of user privacy was evaluated using a set of corresponding metrics.

A quickly growing location-based services area has led to increased demand for indoor positioning and localization. Undoubtedly, Wi-Fi fingerprint-based localization is one of the promising indoor localization techniques, yet the variation of received signal strength is a major problem for accurate localization. Magnetic field-based localization has emerged as a new player and proved a potential indoor localization technology. However, one of its major limitations is degradation in localization accuracy when various smartphones are used. The localization performance is different from various smartphones even with the same localization technique. This research leverages the use of a deep neural network-based ensemble classifier to perform indoor localization with heterogeneous devices. The chief aim is to devise an approach that can achieve a similar localization accuracy using various smartphones. Features extracted from magnetic data of Galaxy S8 are fed into neural networks (NNs) for training. The experiments are performed with Galaxy S8, LG G6, LG G7, and Galaxy A8 smartphones to investigate the impact of device dependence on localization accuracy. Results demonstrate that NNs can play a significant role in mitigating the impact of device heterogeneity and increasing indoor localization accuracy. The proposed approach is able to achieve a localization accuracy of 2.64 m at 50% on four different devices. The mean error is 2.23 m, 2.52 m, 2.59 m, and 2.78 m for Galaxy S8, LG G6, LG G7, and Galaxy A8, respectively. Experiments on a publicly available magnetic dataset of Sony Xperia M2 using the proposed approach show a mean error of 2.84 m with a standard deviation of 2.24 m, while the error at 50% is 2.33 m. Furthermore, the impact of devices on various attitudes on the localization accuracy is investigated.

People generally find themselves lost while visiting a new indoor location because they are unaware of the building’s architecture, especially when it is a large one or a shopping mall. The Global Position System (GPS) does not work properly in the indoor environment because of the satellite signal attenuation. In this paper, to assist people in finding their path, a Li-Fi (Light-Fidelity) based Indoor Positioning System (IPS) is proposed. A framework is developed based on a Li-Fi LED lamp transmitter and a dongle receiver connected to an Android smartphone to decode the received sequence. The pathfinding graph-based algorithm is proceeded in a REST architecture by a Web service consulting the graph-path database both installed on a Raspberry pi 4. The proposed solution is a low cost and does not require any additional infrastructure. It is easy to implement in most indoor environments like hospitals, buildings, and campuses. A short survey of techniques and algorithms for indoor positioning and navigation with the help of smartphones is also presented.

With the proliferation of the Internet of Things (IoT), employing Received Signal Strength (RSS) as a metric to determine the location of a target (e.g., person or mobile device) is of great interest in terms of cost and ease of implementation. Indeed, RSS measurements can be easily obtained for most off-the-shelf devices, such as WiFi- or ZigBee compatible devices or sensors. This paper deals with the indoor localization problem in wireless sensor networks (WSNs) and proposes a new approach for radio signal propagation modelling and localization estimation, that accounts for the imperfection of RSS measurements and the reliability of RSS sources by using the Dempster-Shafer Theory (DST). In the signal propagation modelling, key information regarding the geometry of indoor environment that is divided into zones separated by walls (zoning), are considered. Based on the number of walls, the RSS irregularities are estimated using different distance intervals, which are weighted by a probability density determined experimentally. To estimate the location of a target node, the PCR6 rule is used to combine the belief masses of the positions obtained from the probability density. In order to evaluate the performance of the proposed approach, an experimental WSN has been deployed in a living apartment. The obtained results demonstrate that the proposed approach improves the localization accuracy compared to the case without zoning. Moreover, the obtained localization mean error proves the feasibility of a precise localization of humans in indoor environments in the case of Ambient Assisted Living and Social Robotics applications.

Where am I in the dark: Exploring active transfer learning on the use of indoor localization based on thermal imaging

In recent years, developing Indoor Positioning System (IPS) has become an attractive research topic due to the increasing demands on Location-Based Service (LBS) in indoor environment. Several advantages of Radio Frequency Identification (RFID) Technology, such as anti-interference, small, light and portable size of RFID tags, and its unique identification of different objects, make it superior to other wireless communication technologies for indoor positioning. However, certain drawbacks of existing RFID-based IPSs, such as high cost of RFID readers and active tags, as well as heavy dependence on the density of reference tags to provide the LBS, largely limit the application of RFID-based IPS. In order to overcome these drawbacks, we develop a cost-efficient RFID-based IPS by using cheaper active RFID tags and sensors. Furthermore, we also proposed three localization algorithms: Weighted Path Loss (WPL), Extreme Learning Machine (ELM) and integrated WPL-ELM. WPL is a centralized model-based approach which does not require any reference tags and provides accurate location estimation of the target effectively. ELM is a machine learning fingerprinting-based localization algorithm which can provide higher localization accuracy than other existing fingerprinting-based approaches. The integrated WPL-ELM approach combines the fast estimation of WPL and the high localization accuracy of ELM. Based on the experimental results, this integrated approach provides a higher localization efficiency and accuracy than existing approaches, e.g., the LANDMARC approach and the support vector machine for regression (SVR) approach.

This work designs and develops indoor and outdoor navigation architecture for accurate positioning in small areas. It combines sophisticated technologies, including GPS, Google Maps API, and spatial and descriptive data, to create a precise and user-friendly navigation solution. In addition, maintaining an updated database and integrating interactive features facilitates the adoption of future advanced technologies such as Bluetooth Low Energy (BLE) and Wi-Fi networks for improved accuracy in indoor navigation. This architecture is applied at the University of Mosul to guide students and visitors aboard the large university with many campus facilities. The application allows users to find specific colleges and facilities, look for destinations, and find the shortest way to reach their desired location. The testing results show that the application is efficient regarding location accuracy and response speed, with a 95% user satisfaction rate.

Abstract. Recent years have witnessed the rapid development of navigation systems. They gradually become the default way of navigating in our daily life. Despite benefiting from their convenience, we may be negatively influenced by them (Parush et al. 2007). Current navigation systems usually draw too much of users' attention to the mobile devices, which leads to users’ lacking interaction with the environment. It is often the case that people easily forget travelled route and get lost without navigation systems (Reilly et al. 2008). Empirical study shows that by dividing attention, navigation systems impair users’ spatial memory, and thus impact their navigation skills (Gardony et al. 2013). Since a higher engagement with the environment can improve users’ spatial knowledge acquisition without decreasing efficiency (Brügger et al. 2017), navigation systems should incorporate important environmental features.As objects of visual, cognitive or structural importance (Sorrows & Hirtle 1999), landmarks have been extensively studied, and considered as an important environmental feature to be incorporated into navigation systems (Nuhn & Timpf 2018, Richter 2017, Duckham et al. 2010, Raubal & Winter 2002). They serve as references to provide users with more natural and pleasant navigating experience (Richter & Winter 2014). However, most of landmark-related studies are in outdoor environment. Although researchers have attempted to classify and assess indoor landmarks (Ohm 2014, Viaene 2014), it is still very difficult to determine suitable ones. As a subset of semantic indoor landmarks, existing navigational aids (e.g. signs and floor plans) are designed to assist navigation. Among them, signs are most preferred by users (Wang et al. 2017). Being the signs that give necessary information to route users to possible destinations, directional signs contribute most to wayfinding (Gibson 2009). With route information explicitly presented by them, they are relevant environmental features to be incorporated into indoor navigation systems.In this study, we therefore propose to incorporate directional signs into indoor navigation systems, in order to guide users’ attention back to the environment, to facilitate their spatial learning and improve their spatial knowledge acquisition.We incorporated directional signs into a proof-of-concept indoor navigation system. First, we integrated directional signs and their semantics into a graph-based model. A directional sign was modelled as a node. Each destination on the sign was linked with the sign by an edge. In order to differentiate it from the normal edge, it was marked as semantic edge. Thus, the semantics of the sign was modelled directly into the graph, instead of being stored as attributes in a previous version of our study (Wang & Gartner 2018). Then, a top-K shortest path algorithm was employed to find candidate routes (Yen 1971). In the end, the route with the largest coverage of semantic edges was suggested to the user. The users would then be explicitly guided to follow the directional signs in the environment.In the next step, we will evaluate the efficiency and effectiveness of the proposed navigation system by an empirical study with human subjects. Within the experiment, we will also investigate on whether this kind of guidance can succeed in drawing users’ attention back to the environment and support their spatial knowledge acquisition.

This paper deals with navigation of mobile device in outdoor and indoor environment by only navigation system or application. In the paper, the navigation system is proposed in the light of seamless navigation service. Main parts of the system from positioning point of view are based on GPS and WifiLOC system. WifiLOC is an indoor positioning system based on Wi-Fi technology. The proposal of the system will be described in detail. The system is implemented at the University of Zilina as a pilot, noncommercial project; therefore it is called University Mobile Navigation System (UMNS). The navigation system can be characterized as real-time system, that is, the system operations cannot be significantly delayed. Since delay of the system depends significantly on communication platform used for map information downloading or communication with the localization server. We decided to investigate an impact of the used communication platform on the time needs for some of the functions implemented in navigation system. Measurements were performed in the real-world application. Next experiment is focused on testing of the accuracy of used indoor positioning system. Outdoor positioning accuracy is not tested because GPS is utilized in outdoor, and this system was already exhaustively investigated.

An indoor localization system in wireless sensor networks has become a hot development area. Received signal strength indicator (RSSI)-based localization is a promising technique since it requires a relatively low configuration, battery power and easy control. However, the received signal strength is influenced by channel interference and propagation environments. This characteristic affects channel stability and location accuracy in RSSI-based localization. As a result, we propose a novel indoor localization system consisting of a preprocessing method and a post-processing method. To improve channel stability, the pre-processing method selects an optimal channel in terms of the smallest distance error. The optimal channel is less affected to IEEE 802.11. To develop location accuracy, the post-processing method performs maximum likelihood estimation-based location tracking scheme considering the reliability of the RSSI value measurement. We apply three methods to the existing MLE to improve the reliability of the RSSI value. By using this indoor localization system with preprocessing and post-processing, the location error can be reduced. We also proved the performance of the indoor localization system by conducting experiments in a real indoor environment.

More buildings are becoming smart day by day which play a key role in development of smart cities and Internet of Things is essential in the development of such smart buildings. The incorporation of smart infrastructure is taken care right from the design phase of smart buildings itself. One of the crucial smart infrastructures in the development of smart buildings and smart cities is indoor localization. Being aware of the location or movement of people within a building can be very useful in several ways like energy management, location aware marketing services etc. and there are so many such IoT services. So the research problem here is to locate people within a building without using any additional infrastructure. Many research proposals have already been made over the last few years with the goal of predicting location in smart buildings but the real challenge lies with the accuracy of predicted location. User privacy and energy efficiency are also major challenges of indoor localization. Here we propose a random forest based machine learning algorithm that concentrates on improving the location accuracy in indoor localization as an IoT service for smart buildings. The obtained experimental results show 14% better success test prediction percentage in terms of overall deviation.

Indoor localization has gained significant attention recently due to the growing demand for location-aware applications within indoor environments. Among various techniques, Wi-Fi fingerprinting combined with the Internet of Things (IoT) has emerged as a promising solution for accurate and cost-effective indoor localization. This paper surveys the existing research related to indoor localization using Wi-Fi fingerprinting with the IoT, aiming to provide a comprehensive understanding of the advancements, challenges, and potential applications in this field. The paper begins by introducing the fundamental concepts of indoor localization and the role of Wi-Fi fingerprinting in achieving accurate position estimation. In addition, this paper focuses on the contributions of Artificial Intelligence (AI), Machine Learning (ML), and Deep Learning (DL) in improving localization accuracy, robustness, and scalability. The reviewed papers have been examined from various aspects, including system architecture, deployment strategies, fingerprint creation techniques, and localization algorithms, with a discussion about the advantages and limitations of each approach. In addition to discussing the state-of-the-art techniques, this paper identifies research gaps and open challenges in indoor localization using Wi-Fi fingerprinting with the IoT. The findings presented in this paper can guide future research efforts, leading to the development of intelligent and context-aware IoT applications within indoor environments.

Since the well-established navigation systems such as GPS are ineffective in indoor environments, research into developing novel indoor positioning technologies has emerged in recent years. While several technologies are being investigated, a practical and reliable indoor positioning system is yet to emerge. Indoor positioning using light signals holds a great potential to provide a reliable solution to the indoor positioning problem. This paper presents a comprehensive review of the available literature on light-based indoor positioning systems. The paper establishes a classification based on the design of various light-based indoor positioning (LIP) systems, and discusses their key components including hardware, software and algorithms. The limitations and challenges of the LIP systems are discussed in details, and current published solutions are presented. The review also provides a comparison between LIP systems and other optical positioning systems, and identifies the associated research gaps. Finally, based on the identified gaps, the future research directions in both LIP systems and other optical positioning systems are presented.

Location-based service in the indoor environment is playing a crucial role in different application scenarios. The introduction of technologies, such as ultradense network and massive multiple-input multiple-output enables fifth-generation (5G) cellular signals, as a new generation of cellular network signals, to show unique advantages in indoor positioning. This article describes 5G reference signal structures that can be used for navigation. A high-precision time-of-arrival estimation method based on 5G downlink signal is proposed that can be realized by edge computing. A software-defined receiver (SDR) based on machine learning to extract navigation observations from 5G signals is then developed. In simulation, the error sources of SDR in additive white gaussian noise channel and multipath channel were analyzed, and the possible ranging accuracy achieved by 5G signals in the developed SDR was evaluated. In field experiments, commercial 5G signals deployed by operators were collected, and the performance of SDR in practical applications was evaluated. The feasibility in practical applications of the proposed SDR is demonstrated, and high pseudorange measurement accuracy can be achieved.