Voltage Frequency Ratio Control Method of the Cycloconverter Based on the GSO Algorithm

Glowworm Swarm Optimization (GSO) algorithm is a derivative-free, meta-heuristic algorithm and mimicking the glow behavior of glowworms which can efficiently capture all the maximum multimodal function. Nevertheless, there are several weaknesses to locate the global optimum solution for instance low calculation accuracy, simply falling into the local optimum, convergence rate of success and slow speed to converge. This paper reviews the exposition of a new method of swarm intelligence in solving optimization problems using GSO. Recently the GSO algorithm was used simultaneously to find solutions of multimodal function optimization problem in various fields in today industry such as science, engineering, network and robotic. From the paper review, we could conclude that the basic GSO algorithm, GSO with modification or improvement and GSO with hybridization are considered by previous researchers in order to solve the optimization problem. However, based on the literature review, many researchers applied basic GSO algorithm in their research rather than others.

The glowworm swarm optimisation (GSO) algorithm is a novel algorithm with the simultaneous computation of multiple optima of multimodal functions. Data-clustering techniques are classification algorithms that have a wide range of applications. Since K-means algorithm is easy to fall into the local optimum by the selection of initial clustering centre, GSO algorithm is used for the telecom customers clustering. The customer consumption data is extracted by means of the recency frequency monetary (RFM) model and the standardised data is clustered automatically using the GSO algorithm's synchronous optimisation ability. In the clustering optimisation algorithm, adaptive step size is used instead of the original fixed step size to avoid local optimisation of the algorithm and obtain higher accuracy. Compared with K-means clustering algorithm, GSO approach can automatically generate the number of clusters and use RFM model to reduce effectively the size of the data processing. The results of the experiments demonstrate that the GSO-based clustering technique is a promising technique for the data clustering problems.

This study proposes glowworm swarm optimization (GSO) algorithm to estimate an improved value of machining performance measurement. GSO is a recent nature-inspired optimization algorithm that simulates the behavior of the lighting worms. To the best our knowledge, GSO algorithm has not yet been used for optimization practice particularly in machining process. Three cutting parameters of end milling that influence the machining performance measurement, minimum surface roughness, are cutting speed, feed rate and depth of cut. Taguchi method is performed for experimental design. The analysis of variance is applied to investigate effects of cutting speed, feed rate and depth of cut on surface roughness. GSO has improved machining process by estimating a much lower value of minimum surface roughness compared to the results of experimental and particle swarm optimization.

The aim of this study is to develop an integrated study of surface roughness (Ra) in the die-sinking electrical discharge machining (EDM) process of Ti-6AL-4V titanium alloy with positive polarity of copper-tungsten (Cu-W) electrode. Regression analysis and glowworm swarm optimization (GSO) algorithm were considered for modelling and optimization process. Pulse on time (A), pulse off time (B), peak current (C) and servo voltage (D) were selected as the machining parameters with various levels. The experiments have been conducted based on the two levels of full factorial design with an added center point design of experiments (DOE). Moreover, mathematical models with linear and 2 factor interaction (2FI) effects of the parameters chosen were developed. The validity test of the fit and the adequacy of the developed mathematical models have been carried out by using analysis of variance (ANOVA) and F-test. The statistical analysis showed that the 2FI model outperformed with the most minimal value of Ra compared to the linear model and experimental result.

In this chapter, we present, initially, a literature review of the most recent publications for the glowworm swarm optimization (GSO) algorithm. Then, we propose a modified version of the algorithm, the parallel multi-start multiobjective glowworm swarm optimization (PMS-GSO) algorithm, which is suitable for multi-objective routing problems. The proposed PMS-GSO was used for the solution of a very complex vehicle routing problem, the multi-objective route-based energy reduction multi-depot vehicle routing problem (MERMDVRP). We solved four different versions of the problem, from the simplest one, where we had a problem without real-life constraints, to the most difficult one, where a number of real-life constraints based mainly on the behavior of the driver, the road, and the weather conditions have been added. Finally, we compared the computational results of the proposed algorithm with the computational results of three other algorithms, the parallel multi-start non-dominated sorting genetic algorithm II (PMS-NSGA-II), the parallel multi-start multi-objective firefly (PMS-FIREFLY) algorithm, and the parallel multi-start multi-objective particle swarm optimization (PMS-NSPSO) algorithm in a number of benchmark instances.

2-Chlorophenol is a kind of representative organic waste water. With the environmental pollution becoming increasingly serious, and the large amount of waste discharged and the increasing difficulty of treatment, the research on the kinetics of the oxidation of supercritical water of 2-chlorophenol has important significant. Aiming at the phenomenon that the Glowworm Swarm Optimization (GSO) algorithm has slow convergence, low precision and easy to get trapped into local optimum, this paper presents an improved version of the GSO based on the behavior of predator-prey and biological predator, and we call it dual population Glowworm Swarm Optimization (GSOPP). The algorithm accelerates the convergence speed by introducing strategies such as chase and escape and variation among populations, and can obtain a more accurate solution. Tested by three standard test functions, the results showed that the improved GSOPP algorithm had better performance than the basic GSO algorithm. Finally, the algorithm was applied to estimate the parameter estimation of the supercritical water oxidation kinetics of 2-chlorophenol, and satisfactory results were obtained.

Glowworm Swarm Optimization Algorithm (GSO) is one of new swarm intelligence optimization algorithms in recent years. Its main idea comes from the cooperative behavior source among individuals during the process of courtship and foraging. In this paper, in order to improve convergence speed in the late iteration, avoid the algorithm falling into local optimum, and reduce isolated nodes, the Adaptive Step Mechanism Glowworm Swarm Optimization (ASMGSO) is proposed. The main idea of ASMGSO algorithm is as follows: (1) On the basis of SMGSO algorithm, isolated nodes carry out bunching operator first, that is to say they are moving to the central position of the group. If the new position is not better than the current position, then isolated nodes perform mutation operation. (2) At the same time, the fixed step mechanism has been improved. Each individual has its step size which is adapted to itself in the iterative process. The step size is not only affected by the node's neighborhood density but also affected by the distance to the moving target node. The effectiveness of the proposed ASMGSO algorithm is verified through several classic test functions and application in Distance Vector-HOP.

Electric Discharge Machining (EDM) is a non-traditional machining process that utilizes electric sparks between an electrode and a workpiece submerged in a dielectric fluid to ablate a material. It is commonly used in die-making, aerospace, automotive manufacturing, and medical manufacturing, because it can machine hard and complex materials with high precision. In this work, a Surface Roughness Optimization for EDM (SRO-EDM) model is proposed to investigate the machining performance of the die-sinking EDM process of titanium alloys. A regression-based combined approach of Glowworm Swarm Optimization (GSO) and a Two-Factor Interaction (2FI) model has been proposed to investigate the impact of four key process variables, namely voltage (V), peak current (Ip), pulse-on time (ton), and pulse-off time (toff) on surface roughness (Ra) at various locations on work surfaces. A Central Composite Design (CCD) was applied to systematically investigate parameter combinations. Statistical analysis was performed using analysis of variance (ANOVA), which confirmed the statistical significance of the selected parameters, and 2FI regression (R² = 0.60) with moderate-fit predictive accuracy was established. To enhance the quality of optimization, the Enhanced Glowworm Swarm Optimization (EGSO) algorithm is proposed by hybridizing the GSO with Artificial Fish Swarm (AFS) algorithm. The AFS module improves the exploration capability of the GSO and alleviates the local optima problem. For the experimental validation of the model, Response Surface Methodology (RSM) was used to generate the regression based on the developed model and as an objective function for optimization. Experimental results show that EGSO outperforms GSO in performance to achieve an optimized Ra ( ) compared to through conventional GSO. The results demonstrate that the EGSO model can improve convergence accuracy and speed and is a practical method for EDM surface quality optimization in the high-precision manufacturing industry.

Aiming at the problem of host load forecasting in mobile cloud computing, the Long Short Term Memory networks (LSTM) is introduced, which is suitable for the complex and long-time series data of the cloud environment and a load forecasting algorithm based on Glowworm Swarm Optimization LSTM neural network is proposed. Specifically, we build a mobile cloud load forecasting model using LSTM neural network, and the Glowworm Swarm Optimization Algorithm (GSO) is used to search for the optimal LSTM parameters based on the research and analysis of host load data in the mobile cloud computing data center. Finally, the simulation experiments are implemented and similar prediction algorithms are compared. The experimental results show that the prediction algorithms proposed in this paper are superior to similar prediction algorithms in prediction accuracy.

With the rapid development of indoor positioning technology, radio frequency identification (RFID) technology has become the preferred solution due to its advantages of non-line-of-sight, non-contact and rapid identification. However, the accuracy of existing RFID indoor positioning algorithms is easily affected by the tag density and algorithm efficiency, and their environmental robustness is not strong enough. In this paper, we have introduced an RFID positioning algorithm based on the Glowworm Swarm Optimization (GSO) fused with semi-supervised online sequential extreme learning machine (SOS-ELM), which is called the GSOS-ELM algorithm. The GSOS-ELM algorithm automatically adjusts the regularization weights of the SOS-ELM algorithm through the GSO algorithm, so that it can quickly obtain the optimal regularization weights under different initial conditions; at the same time, the semi-supervised characteristics of the GSOS-ELM algorithm can significantly reduce the number of labeled reference tags and reduce the cost of positioning systems. In addition, the online learning phase of the GSOS-ELM algorithm can continuously update the system to perceive changes in the environment and resist the environmental interference. We have carried out experiments to study the influence factors and validate the performance, both the simulation and testbed experiment results show that compared with other algorithms, our proposed GSOS-ELM localization system can achieve more accurate positioning results and has certain adaptability to the changes of the environment.

In this paper, two new cluster analysis methods based on glowworm swarm optimization (GSO) algorithm are proposed. The first algorithm showed how GSO can be used to self-organization cluster analysis. The second algorithm is hybrid the GSO clustering analysis with the K-means algorithm to accelerate classification. Two clustering algorithms are tested on three data sets; experimental results show that the two kind of clustering algorithm has higher clustering results.

In communication networks, the multi-constraint multicast communication is an important way to improve the efficiency of network operation and quality of service. Some heuristic algorithms are applied in solving multicast routing problem under multiple constraints, such as simulated annealing, genetic algorithm, ant colony algorithm and particle swarm optimization algorithm. However, these algorithms suffer from low convergence rate and high computational complexity in solving multi-constraint multicast routing problems. The glowworm swarm optimization (GSO) algorithm is a promising algorithm recently arisen, which can overcome such shortcomings. This paper proposes a GSO based multi-constraint multicast (GSO-MCM) algorithm, which can efficiently generate multicast routing tree to meet the multi-constraint requirements. The simulation result manifests that the GSO-MCM algorithm proposed in this paper performs well in searching, converging speed and adaptability scale.

Breast imaging technique called mammography has gained bigger attention among the researchers for the diagnosis of breast malignancy in the woman. Mammogram screening is the most effective procedure to visualize various potential problems in the breast. The two most common features connected with breast tumors are mass lesions and microcalcification. The collection of suitable image preprocessing, segmentation, feature extraction, selection and prediction algorithms play an essential role in the accurate detection and classification of cancer on mammograms. Classification techniques estimate unlabeled datasets class labeling depending on its similarity to the pattern learned. The Glowworm Swarm Optimization(GSO) algorithm is ideal for finding several solutions, and dissimilar or equivalent objective function values at the same time. This feature of GSO is useful for optimizing the feature set obtained from multiscale feature extraction procedures. Poor performance in generalization is the issue that arises due to the unconditioned output matrix of the hidden stage of the ELM classifier. The optimization algorithms will address this matter because of their global search capabilities. This article suggests ELM with the Fruitfly Optimization Algorithm (ELM‐FOA) along with GSO to regulate the input weight to achieve maximal performance at the hidden node of the ELM. The testing precision and sensitivity of GSO‐ELM‐FOA are 100% and 97.91%, respectively. The system developed will detect the calcifications and tumors with an accuracy of 99.15%.

BackgroundIdentifying protein complexes plays an important role for understanding cellular organization and functional mechanisms. As plenty of evidences have indicated that dense sub-networks in dynamic protein-protein interaction network (DPIN) usually correspond to protein complexes, identifying protein complexes is formulated as density-based clustering.MethodsIn this paper, a new approach named iOPTICS-GSO is developed, which is the improved Ordering Points to Identify the Clustering Structure (OPTICS) algorithm with Glowworm swarm optimization algorithm (GSO) to optimize the parameters in OPTICS when finding dense sub-networks. In our iOPTICS-GSO, the concept of core node is redefined and the Euclidean distance in OPTICS is replaced with the improved similarity between the nodes in the PPI network according to their interaction strength, and dense sub-networks are considered as protein complexes.ResultsThe experiment results have shown that our iOPTICS-GSO outperforms of algorithms such as DBSCAN, CFinder, MCODE, CMC, COACH, ClusterOne MCL and OPTICS_PSO in terms of f-measure and p-value on four DPINs, which are from the DIP, Krogan, MIPS and Gavin datasets. In addition, our predicted protein complexes have a small p-value and thus are highly likely to be true protein complexes.ConclusionThe proposed iOPTICS-GSO gains optimal clustering results by adopting GSO algorithm to optimize the parameters in OPTICS, and the result on four datasets shows superior performance. What’s more, the results provided clues for biologists to verify and find new protein complexes.

This paper proposes an indirect method for the identification of moving vehicular parameters using the dynamic responses of the vehicle. The moving vehicle is modelled as 2-DOF system with 5 parameters and 4-DOF system with 12 parameters, respectively. Finite element method is used to establish the equation of the coupled bridge–vehicle system. The dynamic responses of the system are calculated by Newmark direct integration method. The parameter identification problem is transformed into an optimization problem by minimizing errors between the calculated dynamic responses of the moving vehicle and those of the simulated measured responses. Glowworm swarm optimization algorithm (GSO) is used to solve the objective function of the optimization problem. A local search method is introduced into the movement phase of GSO to enhance the accuracy and convergence rate of the algorithm. Several test cases are carried out to verify the efficiency of the proposed method and the results show that the vehicular parameters can be identified precisely with the present method and it is not sensitive to artificial measurement noise.