Voltage instability detector based on Phasor Measurement Units using artificial neural network

Pulsed Nd:YAG laser has high intensity and high quality beam characteristics, which can be used to produce micro-grooves and micro-turning surface on advanced engineering ceramics. The present research attempts to develop mathematical models by using response surface methodology approach for correlating the machining process parameters and the process responses during laser micro-turning of aluminum oxide (Al2O3) ceramics. The process parameters such as laser average power, pulse frequency, workpiece rotating speed, assist air pressure and Y feed rate were varied during experimentation. The rotatable central composite design experimental planning has been used to design the experimentation. The performance measures considered are surface roughness (Ra) and micro-turning depth deviation. Multi-objective optimization has been carried out for achieving the desired surface roughness as well as minimum depth deviation during laser micro-turning operation. Further, an artificial neural network (ANN) model has been developed to predict the process criteria. Levenberg-Marquadt training algorithm is used for multilayer feed forward backpropagation neural network. The developed ANN model has 5-10-2 feed forward network. There are 5 neurons in the input layer, 10 neurons in the hidden layer and 2 neurons in the output layers corresponding to two output responses, respectively. The developed ANN model has been validated using data obtained by conducting additional set of experiments. It was found that the developed ANN model can predict the process criteria more accurately than response surface methodology (RSM) based developed models.

A review on neural networks with random weights

Biosorption of copper(II) ions by flax meal: Empirical modeling and process optimization by response surface methodology (RSM) and artificial neural network (ANN) simulation

Modeling and optimization III: Reaction rate estimation using artificial neural network (ANN) without a kinetic model

In the present paper, we have employed the application of artificial neural networks (ANN) to predict effective heat storage coefficient (HSC) of building materials. First we prepared a database to train and test the models developed here. Two types of architectures from different networks are developed, one with three inputs and the other with four inputs mixed architecture combining an ANN with a theoretical model developed by us previously. These ANN models are built, trained and tested by the feed forward back propagation algorithm, to obtain the effective properties of building materials from the properties of their constituents. Feed forward back propagation neural network structure has been developed, which includes an input layer, a hidden layer and an output layer. The number of neurons in the input layer is equal to the number of input parameters and the number of neurons in the output layer is equal to the output parameters. A good agreement has been found between the predicted values using ANN and the experimental results reported in the literature.

Introduction Atmospheric corrosion is the main cause of metallic heritage degradation when they are exposed to relative humidity, temperature cycle and air contaminants. Corrosivity maps are one of the preventive strategies for atmospheric corrosion mitigation, but they do not provide enough information about corrosion mechanism, besides that long experimentation periods are required [1]. Moreover, electrochemical techniques are alternatives to speed up results, but their relationship with constantly changing environmental variables is difficult to control.Currently, Artificial Intelligence has been introduced in corrosion engineering studies, because of its capability to make predictions based on big data. Also, experimental data of Electrochemical Impedance Spectroscopy had been used in Artificial Neural Network training to obtain Nyquist Diagrams [2]. The objective of this work is to obtain computational models of Artificial Neural Networks to predict atmospheric corrosion in Bronze with nanostructured patina with SiO2, in marine environments. Method Environmental parameters were taken from database previously reported [3,4], and from Civil Protection Secretariat of Veracruz. Whilst electrochemical evaluation consists in Polarization Resistance and Electrochemical Impedance Spectroscopy; they were carried out in a Gamry Interface 1000 Potentiostat with a Saturated Calomel Reference Electrode (SCE) and a graphite bar as counter electrode in an agar gelled cell. Meanwhile, working electrode was bronze with nanostructured patina with SiO2. Two patina were prepared, the first with CuSO4 solution (0.015 mol L-1) and the second applying a CuNO3 solution (20% wt).The 13 variables used in the database for Artificial Neural Networks (ANN) training were: exposure time, chloride concentration, sulfur compounds concentration, relative humidity, precipitation level, windspeed, temperature, nanocoating presence, corrosion potential, corrosion rate, frequency, real and imaginary component of impedance. The values of each variable were treated with measures of central tendency and dispersion, as well as correlation matrix and histograms, which allowed to find a relationship between variables, and choosing the inputs for ANN. The prediction models consisted in 5, 9, 10 and 12 neurons in the input layer (R5E, R9E, R10E and R12E, respectively), a hidden layer, and Zima as only neuron in the output layer. The number of neurons in hidden layer varied from 1 to 8 until the highest coefficient of determination was achieved. The computational model was performed using the toolbox in MATLAB with a feedforward ANN. It is worth mention that the hidden and output layers used a hyperbolic tangent and a linear transfer function, respectively, and a Levenberg-Marquardt algorithm as training function was used in the models. Results and Conclusions Figure 1 presents the coefficient of determination (R2) and root mean squared error (RMSE) with different ANN architectures. In the four models, the highest value was reached with 8 neurons in the hidden layer. Then, the linear regressions for R5E, R9E, R10E and R12E models and 8 neurons in the input layer were compared in Figure 2. In that sense, the Nyquist Diagrams in Figure 3 were simulated with the R9E and R12E models. Also, they were compared with experimental Nyquist Diagrams for Bronze with patina of CuSO4 and CuNO3, with and without SiO2 nanoparticles, at 56 days of exposure in marine atmospheres. The simulations demonstrated how an ANN model with 12 neurons in the input layer, 8 neurons in the hidden layer and 1 neuron in the output layer can be used as a corrosion prediction model of bronze with nanostructured patina with SiO2.

This study investigates the effectiveness of an Artificial Neural Network (ANN) model in enhancing the classification of dry beans varieties. The dry beans dataset, comprising 13,611 samples and 16 numerical features, was preprocessed using Z-score normalization for outlier removal and Principal Component Analysis (PCA) to remove 702 outliers and reduce dimensionality to 10 components while preserving 99.99% of the original variance. A feedforward ANN architecture was designed, constructed as a feedforward neural network with three fully connected layers namely, an input layer that receives 10 features (as reduced by PCA), a first hidden layer with 16 neurons and ReLU activation, a second hidden layer with 32 neurons and ReLU activation, and an output layer with neurons equal to the number of classes, using softmax activation for multi-class probability prediction. The model was trained over 60 epochs using TensorFlow/Keras. Evaluation on a held-out test set demonstrated that the ANN model achieved a classification accuracy of 94.50%. Performance metrics, including accuracy, precision, recall, F1-score, and confusion matrix analysis, confirmed the model's robustness and generalization capability across all dry beans’ classes. The findings affirm that ANN models, when supported by appropriate preprocessing, can serve as scalable and accurate alternatives to conventional machine learning approaches in agricultural classification tasks.

A feed-forward multilayer perceptron neural network model with Levenberg-Marquardt learning algorithm has been developed to predict rheological properties of water-based drilling fluids. The developed model was based on a three-layer network containing input, hidden, and output layer. The sigmoid function was applied as the transfer function in the hidden layer and linear transfer function in the output layer. Two statistical parameters, mean square errors and correlation coefficient, were used as a criterion for evaluating artificial neural network modeling performance. Accordingly, a comparison between experimental values and those predicted by the artificial neural network showed a good coincidence proving its high accuracy in estimating target value.

Artificial intelligent provides diverse solutions for the complex problems in agriculture research. The study aimed to use three models of artificial neural networks (Feed Forward Neural Network (FFNN), Generalized Regression Neural Network (GRNN) and Radial-Basis Neural Network (RBNN)) in the field of wheat yield prediction. 27-year data for the period (1986-2012) were utilized to improve the models and four-year data (2013 and 2016) were used to estimate the models, to compare their outputs with the measured data. Prediction data was not entered in the process of building neural network models. The results showed that the optimal configuration of the FFNN model consists of 40 neurons in the hidden layer (8-40-1). The Tan Sigmoid activation function was used in both the hidden layer and the output layer using all of these models (anterior neural feeding network and the regression neural network and radial base neural network) in the 4-year wheat yield forecast field for production (2013-2016) by applying 8 input parameters that were result of NMMS (8.6%, 7.6% and 15.7% resp.), To find that FFNN and GRNN provide the best result from BRNN because while the information set was large or in a wide range, then the range data ranges from -1 to +1 (normalization data) , GRNN gives better outcomes after the information or sample data were in large range.

Summary In this work, the artificial neural network (ANN) is implemented for prediction slug frequency FS for low viscosity μL flow (μL ≤ 1.6 mPa·s) in vertical, horizontal, and inclined pipes. To the authors' knowledge, no ANN model in the literature exists for predicting FS. The input parameters for the suggested ANN are superficial liquid velocity VSL, pipe diameter D, superficial gas velocity VSG, and pipe inclination ϕ. Measured data (450 data points) are gathered from five different resources for developing the ANN model. The ranges of FS, VSL, D, VSG, and ϕ covered by the data set, are (0.03 to 3.167 1/s), (0.05 to 2.073 m/s), (0.01905 to 0.0779 m), (0.133 to 11.84 m/s), and (0 to 90°), respectively. The most popular transfer functions of tangent sigmoid and linear are used in the hidden and output layers, respectively, whereas the Levenberg and Marquardt back propagation algorithm is conducted to train ANN. The experimental data set is divided into 70% for training, 15% for validation, and 15% for testing processes. Due to the absence of a systematic way to find the optimal structure of ANN, an exhaustive search method has been suggested and implemented to find the optimal topology, which is (4-16-1); four neurons in input layer, 16 neurons in the hidden layer, and one neuron in output layer. The proposed ANN predicts correctly the effect of each of the previously mentioned parameters on FS, and it yields a satisfactory prediction and clearly outperforms all the existing models, with a mean square error (MSE) and R2 of 0.0097 and 0.977, respectively.

Forecasting the monsoon temporally is a major scientific issue in the field of monsoon meteorology. The ensemble of statistics and mathematics has increased the accuracy of forecasting of Indian summer monsoon rainfall (ISMR) up to some extent. But due to the nonlinear nature of ISMR, its forecasting accuracy is still below the satisfactory level. Mathematical and statistical models require complex computing power. Therefore, many researchers have paid attention to apply artificial neural network in ISMR forecasting. In this study, we have used feed-forward back-propagation neural network algorithm for ISMR forecasting. Based on this algorithm, we have proposed the five neural network architectures designated as BP1, BP2, $$\ldots, $$ BP5 using three layers of neurons (one input layer, one hidden layer and one output layer). Detail architecture of the neural networks is provided in this article. Time series data set of ISMR is obtained from Pathasarathy et al. (Theor Appl Climatol 49:217–224 1994) (1871–1994) and IITM ( http://www.tropmet.res.in/ , 2012) (1995–2010) for the period 1871–2010, for the months of June, July, August and September individually, and for the monsoon season (sum of June, July, August and September). The data set is trained and tested separately for each of the neural network architecture, viz., BP1–BP5. The forecasted results obtained for the training and testing data are then compared with existing model. Results clearly exhibit superiority of our model over the considered existing model. The seasonal rainfall values over India for next 5 years have also been predicted.

We present an image compression technique using a feedforward neural network. The neural network has three layers: one input layer, one hidden layer and one output layer. The inputs of the neural network are original image data, while the outputs are reconstructed image data which are close to the inputs. If the amount of data required to store the hidden unit values and the connection weights to the output layer of the neural network is less than the original data, compression is achieved. In our experiments, we achieved a compression ratio of about 10 with good reconstructed image quality. The neural network construction algorithm we used has an attractive feature that each addition of a hidden unit to the network will always improve the image quality. Thus our compression scheme is flexible in the sense that the user can trade between image quality and compression ratio depending on the application requirements.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">&gt;</ETX>

Evaluation of neural network based simulation models for the prediction of site specific soil properties of the large agricultural areas will provide important technological benefits for the efficient use of land resources and Agricultural Decision Making System. In this study, an artificial intelligence model was investigated for simulation of site specific iron (Fe) and zinc (Zn) levels in the soils of apple orchard by using a feedforward multilayered Artificial Neural Network (ANN). The measurements of Fe and Zn were made for the topsoil (0-25 cm) and subsoil samples (25-50 cm) collected from forty five different coordinates within intervals of 20 x 10 m based on a grid sampling system in the east and north directions. The measured coordinate values were reflected to the input layer of the developed two input one output feedforward multilayer of the ANN model. Respectively, the measured Fe and Zn values were reflected to its output layer, and then the training stage was started. In the training, back propagation algorithms were used to get the most suitable NN structure for the prediction. As a result of varied trainings, the ANN having two hidden layers and ten neurons produced the best estimation values for site specific Fe and Zn estimations. The most suitable prediction values (R2 = 0.98 and R2 = 0.97, P<0.01) were obtained from the ANN with 10.10.1 structure for site specific Fe and Zn levels in the topsoil. When the simulated values obtained from the ANN model were compared with the measured values, it was observed that successful results were achieved based on varied training values. Hence, the ANN based model should be calibrated for varied training conditions depending on different soil conditions to get more reliable results. Key words: Articifial neural network, neural structures, iron, zinc, apple orchard.

In the present study, deep learning neural network model has been employed in many engineering problems including heat transfer prediction. The main consideration of this document is to predict the performance of the boiling heat transfer in helical coils under terrestrial gravity conditions and compare with actual experimental data. Total of 877 data sample has been used in the present neural model. Artificial new Neural Network (ANN) model developed in Python environment with Multi-layer Perceptron (MLP) using four parameters (helical coils dimensions, mass flow rate, heating power, inlet temperature) and one parameter (outlet temperature) has been used in the input layer and output layer in order. Levenberg-Marquardt (LM) algorithm using L2 Regularization to find out the optimal model. A typical feed-forward neural network model composed of three layers, with 30 numbers of neurons in each hidden layer, has been found as optimal based on statistical error analysis. The 4-30-30-1 neural model predicts the characteristics of the helical coil with the accuracy of 98.16 percent in the training stage and 96.68 percent in the testing stage. The result indicated that the proposed ANN model successfully predicts the heat transfer performance in helical coils and can be applied for others operation concerned with heat transfer prediction for future works

Modeling of surface roughness in wire electrical discharge machining of Inconel 718 using artificial neural network