Vulnerability assessment and defense technology for smart home cybersecurity considering pricing cyberattacks

Smart meters are key components of the smart grid infrastructure, connecting households to utility providers. With Internet connectivity to such devices, the smart grid Advanced Metering Infrastructure (AMI) is exposed to attacks by the adversary class. Any compromise of a smart meter may jeopardize the security of not just the household in question, but also the entire neighborhood network and possibly the utility provider's core network. One attack category that may pose a serious threat to the AMI is a meter compromise attack, wherein a smart meter is controlled by the adversary, with the intent of committing energy fraud. In this paper, we present a detection model based on a cumulative analysis of smart meter readings of clustered smart meters. The clustering of smart meters is done based on the physical deployment points of individual smart meters within a neighbourhood area network. Results obtained through simulation of the proposed scheme are promising.

Reducing the power supply-demand gap and increasing reliability of power supply are the challenges of current energy management. Implementation of smart grid, smart meters and smart metering can be a possible solution for power demand reduction, efficient power supply management, and optimization of management resource usages. Smart meters include sophisticated measurement and calculation hardware, software, calibration and communication capabilities. For interoperability within a smart grid infrastructure, smart meters are designed to perform functions, and store and communicate data according to certain standards. In this work we discuss smart meter and various elements of smart metering, current state of the technologies related to smart grid, smart meter, advanced metering infrastructure (AMI), and meter data flow in smart grid. We also discuss standards related to smart meter, meter data format and data transmission, functions of smart meter, and functionalities of smart meters, currently deployed by utilities around the world.

Integration of information communication technology via the Internet of Things devices and sensors can enable an efficient power service for utility providers to consumers in advanced metering infrastructure. Authentication and cryptographic mechanisms protect identity, data security and privacy from unauthorised interception for smart meters to servers. In the last couple of years, many key agreement protocols have been prescribed and deployed to fix those issues. Unfortunately, the deployed protocols did not work inside the same protocols, specifically parameter detection and recognition for session key generation, as they entail high computation time and communication bits overheads. Furthermore, the absence of forward secrecy and user anonymity affects the authentication. Therefore, we have proposed a lightweight identity-based key agreement (LIKA) utilising the Diffie–Hellman cryptography with a trusted authority. It seeks to cover both the security and performance criteria with equal weight. The protocol is evaluated by the Canetti and Krawczyk adversarial model, Avispa and cryptographic analysis released the session keys that were not considered as an adversary during mutual authentication. Moreover, as compared to related work, the proposed protocol took the least amount of time (5.319 ms and 1056 bits) for the entire process of session key generation. Furthermore, comparative analysis has shown that the LIKA adequately encompasses computation, communication, and security assessments. Consequently, it is more convenient for practical implementation for a smart grid.

Public-key cryptography (PKC) is widely used in smart grid (SG) communications to reduce the overhead of key management. However, PKC comes with its own problems in terms of certificate management. Specifically, certificate revocation lists (CRLs) need to be maintained and distributed to the smart meters (SMs) in order to ensure security of the communications. The size of CRLs may grow over time and eventually may introduce additional delay, bandwidth, and storage overhead when various applications are run on SG. In this paper, we propose novel algorithms for creating customized CRLs with reduced size for IEEE 802.11s-based advanced metering infrastructure (AMI) networks. Rather than maintaining a huge-size single CRL that introduces unnecessary search time and storage, the idea is to cluster/group SMs within the AMI network and create CRLs based on these groups. The grouping is mainly done in such a way that they bring together the SMs that will be very likely to communicate so that the CRLs will be kept local to that group. To this end, we propose two novel grouping algorithms. The first algorithm is a bottom-up approach, which is based on the existing routes from the SMs to the gateway. Since the SMs will be sending their data to the gateway through the nodes on the route, this forms a natural grouping. The second approach is a top-down recursive approach, which considers the minimum spanning tree of the network and then divides it into smaller subtrees. Via grouping, the length of the CRL for each SM and the corresponding distribution overhead can be reduced significantly. Simulation results have shown that our approach can maintain a balance between the size of the CRL and the number of signatures generated by CAs while guaranteeing security of the communications.

Internet of Things connects people and things at any time and in any place. Smart grid is one of the promising applications of Internet of Things. Advanced metering infrastructure is one of the most significant components in smart grid which collects data from smart meters and sends the collected data to the utility center to be analyzed and stored. To implement two-way communication between smart grid components, machine-to-machine communications has a great potential. In this paper, we propose a machine-to-machine architecture for advanced metering infrastructure in Internet of Things-based smart grid and focus on finding the optimum number of collectors based on two metrics: collectors' cost and packet delay. We model advanced metering infrastructure as a queuing system and derive an expression for packet delay. We also propose a newperformance metric, the product of cost and delay (CD), so that by minimizing it, we can find the optimum number of collectors. The simulation results indicate correctness of our theoretical model and show that we can achieve a balance between cost and delay.

This paper describes the novel methodology for load management control system with continuous power supply feature in Pakistan. Smart meter and smart grids are the crucial components of this proposed power management system for diminishing the possibility of load shedding. Also, this methodology makes it possible to utilize the available energy resources more efficiently using internet of things to overcome the higher energy demands. The advanced metering infrastructure uses the power demand and supply information available from the communication network in managing the demand and supply, real time pricing problems and control over energy theft. Moreover, mathematical analysis supports the efficacy of proposed methodology.

The protection of smart meters (SMs) from cyberattacks is of utmost importance because SMs in advanced metering infrastructure (AMI) are physically unprotected and produce a large amount of sensitive data. Due to scalability, the SMs are small-sized and low-cost devices having low computational capabilities. The algorithms that are designed to complete the security requirements of SMs should be lightweight. To address this issue, this paper proposes a lightweight security solution to address the man-in-the-middle attack, data tempering, and blockchain-based data provenance. Received signal strength indicator (RSSI) is used to generate link fingerprints, which are used along with pseudo-random nonce to secure AMI. The proposed algorithm detects the involvement of adversarial node or meter tempering by computing other values along with 0 and 1 as the average of consecutive RSSI and difference between the RSSI of connected static SMs. Pearson correlation coefficient ( $\rho $ ) of 0.9102 is achieved when no adversarial node is present in between the connected SMs having mobility in one or both SMs. Negative or approximately equal to zero values of $\rho $ are computed when the adversary is present in the AMI or any of the SM in the AMI is forged. For blockchain-based data provenance, all the hash values of the packet header are 100% matched with the hash functions present at the data concentrator unit (DCU), which shows no adversary’s involvement in AMI. For cases when the adversary is in the AMI, hash functions show no match with the hash values present at the DCU.

Research on data security of multicast transmission based on certificateless multi-recipient signcryption in AMI

Advanced Metering Infrastructure (AMI) enables two-way communication between smart devices and utility control centers. This involves remote monitoring and control of energy consumption as well as other parameters in the electrical power network in real time. However, increasing technologies in AMI due to huge deployment of smart meters, integration of devices and application of sensors, demand a strong architectural model with the best network topology to guarantee efficient usage of network resources with minimal latency. In this work, a resource efficient multi-hop network architecture is proposed using hybrid media access protocols. The architecture combines queuing and random-access protocol to achieve optimal network performance. Numerical results show that the probability of delay incurred by an arbitrary smart meter depends on the mean and distribution of the queue switch over a period. It is also observed that for a single queued system, the throughput performance is equal to the existing hybrid method. As the number of smart meters increases to 500, the throughput of the proposed method improves by 10% compared to the existing method. Likewise, as the number of smart meters increases to 500, the delay reduced by 15% compared to the existing method. Keywords: Advanced Metering Infrastructure; hybrid media access protocols; Smart Meter; Smart Grid; Power Network.

The delivery of energy and water meter data, management and control information on separate networks is expensive and defeats the gains of the Advanced Metering Infrastructure (AMI) Smart Grid (SG). In most cases, energy, gas and water services are offered by the same organizational entity, hence the use of different infrastructure for data, service delivery, control and management is expensive and highly illogical. There is a need for a combined energy and water infrastructure to reap the benefits of the AMI SG. Furthermore, combined metering will result in accurate billing, potential cost savings, and improved resource management. This work therefore develops and investigates a combined energy and water AMI smart metering framework. This is possible through a thorough understanding of the AMI technological standards. The implementation of such a system is not trivial, as it depends on many factors: environmental, geographical, technological, economical, regulatory and the existing legacy infrastructure. Optimal technological implementation choices are developed towards an integrated AMI infrastructure. An experimental test bed is developed for delivering energy and water metering data to the utility. The optimal placement results favor the system of separating energy and water actuators at the home area network of the SG while using an integrated communication system. Such a system is feasible, given the different evolution of electricity and water meters and their placement at the home area network, and enables water metering to benefit from the more advanced electrical metering infrastructure.

The Advanced Metering Infrastructure (AMI) is a vital element in the current development of the smart grid. AMI technologies provide electric utilities with an effective way of continuous monitoring and remote control of smart grid components. However, owing to its increasing scale and cyber-physical nature, the AMI has been faced with security threats in both cyber and physical domains. This paper provides a comprehensive review of the crucial cyber-physical attacks and counter defense mechanisms in the AMI. First, two attack surfaces are surveyed in the AMI including the communication network and smart meters. The potential cyber-physical attacks are then reviewed for each attack surface. Next, the attack models and their cyber and physical impacts on the smart grid are studied for comparison. Counter defense mechanisms that help mitigate these security threats are discussed. Finally, several mathematical tools which may help in analysis and implementation of security solutions are summarized.

With the substantial increase in implementation of green technology across all sectors worldwide to overcome energy loss, attributes such as reliability, efficiency, productivity, and security become very crucial for a system. Especially with the integration of IoT and smart features into a system alongside the evolution of Internet, cybersecurity and privacy of an individual component should be taken into important consideration. A smart grid comprises wireless network components exposed to cyber-attacks, smart meters being one the most vulnerable part of an advanced metering infrastructure. An advanced metering infrastructure enables two-way communication for automatic meter readings (AMR) and transmits data through wireless network. To counter cyber-attacks afflicting the network of AMI and functioning of a smart meter, additional intrusion detection methods are implemented into the grid network. The review includes cybersecurity concerns associated with smart meters along with an in-depth insight to some major cyber-attacks and their aftermath.KeywordsCybersecurityCyber-attacks advanced metering infrastructure (AMI)Smart metersDenial-of-service (DoS)False data injection (FDI)Man-in-the-middle (MitM)

Internet of Things connects anythings at any time in any places. Smart grid is one of the promising applications of Internet of Things. Advanced metering infrastructure is one of the most important components of smart grid which aggregates data from smart meters and sends the collected data to the utility center to be analyzed and stored. In this paper, we have proposed an aggregation-based indirect architecture for advanced metering infrastructure architecture in smart grid Internet of Things and focused on finding the optimum number of regional aggregators in its neighborhood area network (NAN) based on three metrics: regional aggregator (RA) power consumption, cost of RAs and wide-area aggregator, and NAN lifetime. We have developed a power consumption model for each RA and define NAN lifetime based on that. We also defined a new performance metric, the product of power consumption and cost (PC), so that by minimizing it, we can obtain the optimum number of RAs. The simulation results indicate correctness of our theoretical model and show that we can achieve a balance between NAN lifetime and RAs' cost.

A review of non-technical loss attack models and detection methods in the smart grid

In smart grid, Advanced Metering Infrastructure (AMI) systems feed the metering data to Energy Supplier (ES) every 15 minutes. Using this information, ES can offer incentives to reduce the total power consumption during the peak hours through the real-time pricing mechanism. However, it also brings privacy concerns. Since the metering data is collected by the ES nearly in real-time, the customer's behavior and habits can be disclosed via the statistical patterns. The privacy problem will hamper the development and deployment of future smart grid. In this paper, we propose a novel metering data transmission scheme in wireless networks. In each Smart Meter (SM), the metering data is split into two parts randomly: Part 1 and Part 2, where the sum of two parts is equal to the original metering data. Part 1 is sent to the ES via cellular link, and Part 2 is sent to the next SM via Wireless Sensor Network (WSN) link. Then the next SM merges Part 2 of the previous SM into its original metering data, and creates the updated metering data. Using the proposed scheme, the metering data received by the ES is randomized, and the customer's privacy can be effectively protected even if some SM cooperates with the ES.