Wave-filter-based approach for generation of a quiet space in a rectangular cavity

10 - Hardware for Active Control

Active control of road noise considering the vibro-acoustic transfer path of a passenger car

Adaptive traffic control systems continuously monitor traffic conditions on an arterial and adjust traffic signal timings to accommodate variation in traffic volume and minimize stops and delays. This paper describes currently practical adaptive control systems which have been used in the United States and worldwide, which include Adaptive Control System-Lite (ACS-Lite), Optimization Policies for Adaptive Control (OPAC), Real-Time Hierarchical Optimized Distributed and Effective System (RHODES), Sydney Coordinated Adaptive Traffic System (SCATS) and Split Cycle Offset Optimization (SCOOT). The comparisons of the benefits from past experiences, cost and hardware requirements will help the traffic engineers and decision makers a guideline to select the optimized adaptive control system based on research objectives.

SummaryIn this study, we present a reinforcement learning (RL)‐based flight control system design method to improve the transient response performance of a closed‐loop reference model (CRM) adaptive control system. The methodology, known as RL‐CRM, relies on the generation of a dynamic adaption strategy by implementing RL on the variable factor in the feedback path gain matrix of the reference model. An actor‐critic RL agent is designed using the performance‐driven reward functions and tracking error observations from the environment. In the training phase, a deep deterministic policy gradient algorithm is utilized to learn the time‐varying adaptation strategy of the design parameter in the reference model feedback gain matrix. The proposed control structure provides the possibility to learn numerous adaptation strategies across a wide range of flight and vehicle conditions instead of being driven by high‐fidelity simulators or flight testing and real flight operations. The performance of the proposed system was evaluated on an identified and verified mathematical model of an agile quadrotor platform. Monte‐Carlo simulations and worst case analysis were also performed over a benchmark helicopter example model. In comparison to the classical model reference adaptive control and CRM‐adaptive control system designs, the proposed RL‐CRM adaptive flight control system design improves the transient response performance on all associated metrics and provides the capability to operate over a wide range of parametric uncertainties.

SummaryAt the present time, there is a great deal of interest in the adaptive control of systems with rapidly varying parameters. Such problems arise in different forms and in many disciplines including finance, sociology, biology, and engineering. In general, these problems are intractable mathematically and the time variations have to be classified in some form to obtain rigorous results. In this paper, we consider the adaptive identification and control of linear systems with periodically varying parameters (referred to as linear time‐varying periodic (LTP) systems). The class of systems with known periodic parameters has been investigated widely since the pioneering work of Floquet and lends itself to rigorous mathematical analysis. However, very little was known until the early years of the last decade concerning the adaptive control of such systems. The problem was introduced by Xu and explored in detail by Narendra and Zhiling in 2006 and 2009, respectively. In 2012, a new method was introduced in adaptive control by Han and Narendra and is referred to as second‐level adaptation. In this paper, the adaptive identification and control of LTP systems using second‐level adaptation is discussed.

This paper concerns the active vibration control of a rectangular panel using smart sensorsfrom the viewpoint of an active wave control theory. The objective of this paperis to present a new type of filter which enables the measurement of the waveamplitude of a rectangular panel in real time for the application of an adaptivefeedforward control system which inactivates vibration modes. Firstly, a novel wavefiltering method using smart PVDF sensors is proposed. It is found that the shapingfunction of smart sensors is a complex function. To realize the smart sensor in apractical situation, a Hilbert transformer is utilized to implement a phase shifter of90° for broadband frequencies. Then, from the viewpoint of a numerical analysis, thecharacteristics of the proposed wave filter and the performance of the adaptive feedforwardcontrol system using the wave filter are discussed. Finally, experiments implementing theactive wave control theory which uses the proposed wave filter are conducted,demonstrating the validity of the proposed method in suppressing the vibration of arectangular panel.

Accurate model of secondary paths is very crucial for the multi-channel filtered-X least mean square algorithm applied in adaptive active noise control system. The auxiliary random noise technique is popular for online secondary path modeling during adaptive active noise control operation. This paper proposes a simplified variable step-size strategy and an effective auxiliary noise power scheduling strategy for the multi-channel filtered-X least mean square algorithm. Through a defined indirect error signal, the proposed method can guarantee every online secondary path modeling filter has its own exclusive variable step-size strategy to update their coefficients, and every injected noise has its own exclusive scheduling strategy considering all of the corresponding online secondary path modeling filters. The proposed method can improve the adaptive performance and simplifies the complexity of multi-channel adaptive active noise control system. Computer simulations show that the proposed method gives much better noise reduction and secondary path modeling accuracy at a somewhat faster convergence rate comparing with the competing methods.

Inertial stabilization systems are designed to maintain the angular orientation of an optical system or other device in inertial space. Applications include surveillance, target tracking, flight control, weapon pointing, navigation, communication and others. Typically, some variation of a closed loop control system is employed which uses feedback from a gyro. The object of this paper is to consider the potential benefits and some approaches to adaptive control algorithms. Ideally, an adaptive control system would adjust itself to achieve "optimal performance" with respect to some criteria in the presence of changing plant characteristics, changing noise characteristics and a changing disturbance environment. Potentially, such a design could provide robust control for a variety of system configurations, mission conditions and applications resulting in significant reductions in both development and production costs as well as improved performance. First, the general stabilization problem and some conventional control system designs are briefly reviewed. Then a variety of adaptive techniques are surveyed. Finally, the current status and results of a joint research project between Texas Instruments and the University of Texas at Arlington whose goal is to develop an adaptive stabilization control system is discussed.

Purpose. The purpose of the article is to develop a methodology for creating cone crusher adaptive control system based on the model-based design method for automated software generation of microprocessor controllers. Methodology. A method based on a block-oriented predictive model was used to generate control signals for the cone crusher. The parameters and structure of this model were identified in real time using measured data from the plant. A prototype of the control system was created in MATLAB/Simulink. Then, the model-based design method was used to generate software for digital signal processors. Mathematical statistics methods were employed to analyze the experimental results. Findings. A method of model-based design of an adaptive control system for a cone crusher has been developed. This system uses a predictive model of a block-oriented structure. This model adjusts the predictive controller’s structure and parameters directly during operation. This approach makes it possible to divide the functions of identifying the process model and generating controls between the two digital controllers. Consequently, the average computational time is reduced while ensuring the stabilization of the degree of homogeneity of ore crushing and separate output of the control size class, with respective standard deviation coefficients not exceeding 3.42 and 1.83 %, respectively. Originality. The regularity of the effect of the closed-side setting and the eccentric speed on the particle size distribution of crushed ore has been established. This shows that high homogeneity of the crushed product is ensured by simultaneously adjusting these input coordinates. We propose a new method for synthesizing an adaptive cone crusher control system based on a model-based design approach. This method provides automated real-time generation of software for microprocessor-based controllers, allowing the system to quickly adjust to changes in rock mass characteristics and other disturbances. Practical value. A hardware and software implementation of an adaptive control system for a cone crusher is proposed. This system is based on a block-oriented predictive model. The model ensures the stabilization of the required ore particle size distribution. This stabilization is achieved by adjusting the closed-side setting and the eccentric speed. The system is based on 16-bit, low-cost digital signal processors. A prototype of the system was tested in a crushing plant at a metallurgical enterprise.

Reweighted adaptive bilinear filters for an active noise control system with a nonlinear secondary path

A New Approach to the Design of an Adaptive Control System

Intelligent electrical discharge machining (EDM) molybdenum‑titanium‑zirconium alloy by an extended adaptive control system

Based on the analysis of the characteristics of practical noises in a driver's cab, and aiming at the real time signal processing requirements, the high speed digital signal processor is used in the active noise control system. And combined with the nonlinear characteristics of the noise, an adaptive active noise control project based on the radial basis function neural network is proposed, at the same time an filter algorithm is given. The result proves the proposed adaptive active noise control system to be feasible and effective.

This paper discusses flying objects’ adaptive control with direct application to the flight of helicopters. Two new automatic adaptive control systems are suggested: the former is used for pitch angle control, while the latter is used for control of helicopter pitch angle and velocity; this second system is an extension of the first one. The adaptive control is based on the dynamic inversion principle and the use of neural networks. The two adaptive control systems have reference models, linear dynamic compensators, linear observers, and neural networks. The adaptive components of the automatic control laws compensate for the approximation errors of the dynamic model’s nonlinear functions. The used actuators are linear or nonlinear. To eliminate the neural networks’ adapting difficulties, a pseudo-control hedging (PCH) block is inserted in the adaptive system; it limits the adaptive pseudo-control by means of a component that represents the estimation error of the actuator dynamics. Thus, the PCH ...

Due to the recent advances in microprocessors, active control of a flexible structure has become a realizable method for suppressing the vibration. Conventional modal-based method encounters difficulties in controlling a distributed parameter structure, since such a structure has an infinite number of vibration modes. To overcome this problem, active wave control has been studied in recent years. This paper presents an active wave control of an orthotropic rectangular panel by expanding the conventional active wave control method for a two-dimensional structural case. First, a transfer matrix method for a rectangular panel is introduced to describe the wave dynamics of the structure. This is followed by the derivation of feedforward control laws for absorbing reflected waves or eliminating transmitted waves. In the proposed method, the control laws are including the modal actuation scheme for uncontrolled direction. Then, from a viewpoint of numerical analyses, basic properties of the proposed method are verified. It is found that the reflected wave absorbing control enables the inactivation of all vibration modes in the controlled direction and the transmitted wave eliminating control enables the generation of an almost vibration-free state.