WiAgent: Link Selection for CSI-Based Activity Recognition in Densely Deployed Wi-Fi Environments

Deep learning techniques for human activity recognition are gaining popularity due to their effectiveness in identifying intricate tasks and their cost-effectiveness compared to conventional machine learning methods. Human Activity Recognition (HAR) is a research domain concerned with detecting the everyday activities performed by individuals using time-series data captured by sensors. HAR encompasses a wide range of applications, including surveillance, baby monitoring, elderly healthcare, and smart driving. This article provides a brief introduction to the application of deep learning in HAR. It covers the fundamental concepts of CNNs and LSTMs, their strengths in capturing spatial and temporal features, and their integration for enhanced activity recognition. Different approaches are employed in HAR to address problems with efficiency and precision. Conventional human activity recognition (HAR) systems rely on wearable devices like IMUs and stretch sensors to identify different activities. These systems have proven to be effective in recognizing simple user actions like sitting, standing, and walking. However, when it comes to more intricate activities like running, jumping, wrestling, and swinging, sensor-based HAR systems encounter greater misclassification rates due to inaccuracies in sensor readings. These errors significantly impact the accuracy of the HAR system, resulting in suboptimal classification outcomes. In contrast, employing vision-based HAR systems enables improved accuracy in identifying complex activities, leading to enhanced overall performance.

Dear Editor, Human activity recognition (HAR) using WiFi signals has been a significant task due to its potential applications in for example, healthcare services and smart homes. This letter deals with the WiFi channel state information (CSI)-based HAR task. To capture the dynamics of human activities well from CSI without using a huge number of training samples, we propose a recurrent model of convolution blocks and transformer encoders. Firstly, the model utilizes the convolution blocks to capture local variation and the self-attention mechanism in transformer encoders to characterize long-range dependencies. Secondly and more importantly, the recurrent architecture models the context information well within CSI signals and allows the network to deepen without scale increase, making it particularly suited to learning from a small amount of CSI samples.

Fine-grained occupant activity monitoring with Wi-Fi channel state information: Practical implementation of multiple receiver settings

Neuromorphic computing with hybrid CNN–Stochastic Reservoir for time series WiFi based human activity recognition

Human activity recognition is becoming the vital underpinning for a myriad of emerging applications in the field of human-computer interaction, mobile computing, and smart grid. Besides the utilization of up-to-date sensing techniques, modern activity recognition systems also require a machine learning (ML) algorithm that leverages the sensory data for identification purposes. In view of the unique characteristics of the measurement data and the ML challenges thereof, we propose a non-intrusive human activity recognition system that only uses existing commodity WiFi routers. The core of our system is a novel multiple kernel representation learning (MKRL) framework that automatically extracts and combines informative patterns from the Channel State Information (CSI) measurements. The MKRL firstly learns a kernel string representation from time, frequency, wavelet, and shape domains with an efficient greedy algorithm. Then it performs information fusion from diverse perspectives based on multi-view kernel learning. Moreover, different stages of MKRL can be seamlessly integrated into a multiple kernel learning framework to build up a robust and comprehensive activity classifier. Extensive experiments are conducted in typical indoor environments and the experimental results demonstrate that the proposed system outperforms existing methods and achieves a 98\% activity recognition accuracy.

Human motion detection and activity recognition are becoming vital for the applications in smart homes. Traditional Human Activity Recognition (HAR) mechanisms use special devices to track human motions, such as cameras (vision-based) and various types of sensors (sensor-based). These mechanisms are applied in different applications, such as home security, Human–Computer Interaction (HCI), gaming, and healthcare. However, traditional HAR methods require heavy installation, and can only work under strict conditions. Recently, wireless signals have been utilized to track human motion and HAR in indoor environments. The motion of an object in the test environment causes fluctuations and changes in the Wi-Fi signal reflections at the receiver, which result in variations in received signals. These fluctuations can be used to track object (i.e., a human) motion in indoor environments. This phenomenon can be improved and leveraged in the future to improve the internet of things (IoT) and smart home devices. The main Wi-Fi sensing methods can be broadly categorized as Received Signal Strength Indicator (RSSI), Wi-Fi radar (by using Software Defined Radio (SDR)) and Channel State Information (CSI). CSI and RSSI can be considered as device-free mechanisms because they do not require cumbersome installation, whereas the Wi-Fi radar mechanism requires special devices (i.e., Universal Software Radio Peripheral (USRP)). Recent studies demonstrate that CSI outperforms RSSI in sensing accuracy due to its stability and rich information. This paper presents a comprehensive survey of recent advances in the CSI-based sensing mechanism and illustrates the drawbacks, discusses challenges, and presents some suggestions for the future of device-free sensing technology.

The conventional Human Activity Recognition (HAR) systems use smartwatches, smartphones, and other wearable devices to autonomously derive consumer physical activities. However, implementing real-time HAR in resource-constrained applications is challenging. Computational offloading approaches must address network reliance, latency, and data privacy, which affect system performance. The present study proposes a low-cost, wearable HAR device that collects and transmits the Inertial Measurement Unit (IMU) telemetry signals to smartphones, enabling real-time on-device activity detection. Human actions are subjective and affected by physiological, environmental, and behavioural factors, complicating HAR systems' performance in personalized contexts. Generalized methods for existing systems reduce performance for new consumers or due to alterations in consumer locomotive signatures. Thus, our second goal is to enable the on-device personalization of wearable HAR models with minimum customer calibration. The HAR device, which is in the form of a smart-band, transfers data to and fro smartphones through Bluetooth Low Energy (BLE). A lightweight 1D convolutional neural network (CNN) is built and, using transfer learning, the network model is fine-tuned from real-time sensed data. On-device HAR inferences ensure real-time processing on smartphones without computational offloading. Smartphone-based on-device training for fine-tuning the model allows the HAR system to get customized without compromising privacy or computational costs. The experimental results show that the personalized classification achieves on average 98% accuracy when assessed using four benchmark datasets.

Modern monostatic radar-based human activity recognition (HAR) systems perform very well as long as the direction of human activities is either towards or away from the radar. The monostatic single-input single-output (SISO) and monostatic multiple-input multiple-output (MIMO) radar systems cannot detect motion of an object that moves perpendicularly to the radar’s boresight axis. Due to this physical layer limitation, today’s radar-based HAR systems fail to classify multi-directional human activities. In this paper, we resolve this typical but critical physical layer problem of contemporary HAR systems. We propose a HAR system underlying a distributed MIMO radar configuration, where multiple antennas of a millimeter wave MIMO radar system (Ancortek SDR-KIT 2400T2R4) are distributed in an indoor environment. In our proposed HAR system, we have two independent and identical monostatic radar subsystems that irradiate and capture the multi-directional human movement from two perspectives, which allows to compute two distinct time-variant radial velocity distributions. A feature extraction network extracts numerous features from the measured time-variant radial velocity distributions, which are then fused by a multiclass classifier to detect five types of human activities. The proposed multi-perspective MIMO-radar-based HAR system achieves a classification accuracy of 98.52%, which surpasses the accuracy of SISO radar-based HAR system by more than 9%. Our approach resolves the physical layer limitations of modern HAR systems that are based on either monostatic SISO or monostatic MIMO radar systems.

Since human bodies are good reflectors of wireless signals, human activities can be recognized by monitoring changes in WiFi signals. However, existing WiFi-based human activity recognition systems do not build models that can quantify the correlation between WiFi signal dynamics and human activities. In this paper, we propose a Channel State Information (CSI)-based human Activity Recognition and Monitoring system (CARM). CARM is based on two theoretical models. First, we propose a CSI-speed model that quantifies the relation between CSI dynamics and human movement speeds. Second, we propose a CSI-activity model that quantifies the relation between human movement speeds and human activities. Based on these two models, we implemented the CARM on commercial WiFi devices. Our experimental results show that the CARM achieves recognition accuracy of 96% and is robust to environmental changes.

PurposeTo find a successful human action recognition system (HAR) for the unmanned environments.Design/methodology/approachThis paper describes the key technology of an efficient HAR system. In this paper, the advancements for three key steps of the HAR system are presented to improve the accuracy of the existing HAR systems. The key steps are feature extraction, feature descriptor and action classification, which are implemented and analyzed. The usage of the implemented HAR system in the self-driving car is summarized. Finally, the results of the HAR system and other existing action recognition systems are compared.FindingsThis paper exhibits the proposed modification and improvements in the HAR system, namely the skeleton-based spatiotemporal interest points (STIP) feature and the improved discriminative sparse descriptor for the identified feature and the linear action classification.Research limitations/implicationsThe experiments are carried out on captured benchmark data sets and need to be analyzed in a real-time environment.Practical implicationsThe middleware support between the proposed HAR system and the self-driven car system provides several other challenging opportunities in research.Social implicationsThe authors’ work provides the way to go a step ahead in machine vision especially in self-driving cars.Originality/valueThe method for extracting the new feature and constructing an improved discriminative sparse feature descriptor has been introduced.

Human activity recognition (HAR) with WiFi channel state information (CSI) is attractive for privacy-preserving, device-free sensing, yet real deployments still struggle with three coupled issues: robustness across rooms and bands, efficiency on edge hardware, and unified support for multiple tasks. We present UN-2DCNN, a lightweight 2D-CNN pipeline tailored to indoor, multi-user CSI sensing. The design reduces temporal redundancy via a simple temporal skipping augmentation, learns a compact 128-D representation with a small CNN+GAP backbone, and injects reliability feedback through uncertainty-aware feature scaling (UAFS): Stage-1 predictive entropy is mapped to a gating weight that rescales features before a second decision head. A channel-attention MLP further suppresses spurious subcarrier responses. Evaluated on a recent multi-user CSI benchmark across classrooms, meeting rooms, and empty environments at 2.4/5 GHz, UN-2DCNN consistently outperforms competitive RNN/Transformer baselines while using only ∼1M parameters and maintaining sub-2 s test-time latency. Beyond higher accuracy, the model exhibits faster, smoother convergence and improved calibration (fewer overconfident errors). Ablations confirm that removing attention, UAFS, or the second-stage head yields consistent drops, and simple temporal skipping on the data side complements model-side selectivity. These results indicate that reliability-aware, lightweight designs can deliver practical accuracy–efficiency trade-offs for CSI-based perception on edge/IoT platforms.

Human Activity Recognition (HAR) systems are designed to read sensor data and analyse it to classify any detected movement and respond accordingly. However, there is a need for more responsive and near real-time systems to distinguish between false and true alarms. To accurately determine alarm triggers, the motion pattern of legitimate users need to be stored over a certain period and used to train the system to recognise features associated with their movements. This training process is followed by a testing cycle that uses actual data of different patterns of activity that are either similar or different to the training data set. This paper evaluates the use of a combined Convolutional Neural Network (CNN) and Naive Bayes for accuracy and robustness to correctly identify true alarm triggers in the form of a buzzer sound for example. It shows that pattern recognition can be achieved using either of the two approaches, even when a partial motion pattern is derived as a subset out of a full-motion path.

We develop a novel deep learning technique for human fall detection using WiFi Channel State Information (CSI) of a WiFi transmitter and receiver. Different motions in the environment generate distinct features in CSI, which can be fed to a supervised learning machine learning algorithm for training. However, the CSI varies from one environment to another, requiring the collection of environment-specific training data. To overcome this challenge, we propose 1-d convolutional neural network using domain adaptation technique. By adapting to un-labeled data from a new environment, we significantly improve precision and recall, making activity recognition accurate in new environments.

When developing a fully automatic system for evaluating motor activities performed by a person, it is necessary to segment and recognize the different activities in order to focus the analysis. This process must be carried out by a Human Activity Recognition (HAR) system. This paper proposes a user adaptation technique for improving a HAR system based on Hidden Markov Models (HMMs). This system segments and recognizes six different physical activities (walking, walking upstairs, walking downstairs, sitting, standing and lying down) using inertial signals from a smartphone. The system is composed of a feature extractor for obtaining the most relevant characteristics from the inertial signals, a module for training the six HMMs (one per activity), and the last module for segmenting new activity sequences using these models. The user adaptation technique consists of a Maximum A Posteriori (MAP) approach that adapts the activity HMMs to the user, using some activity examples from this specific user. The main results on a public dataset have reported a significant relative error rate reduction of more than 30%. In conclusion, adapting a HAR system to the user who is performing the physical activities provides significant improvement in the system’s performance.

Human action recognition (HAR)in videos is a challenging task in computer vision. Conventional methods are prone to explore the spatiotemporal or optical representations for video actions. However, optical representation might be inefficient in some real-life situations, such as object occlusion and dim light. To address this issue, this paper presents a novel approach for human action recognition by jointly exploiting video and Wi-Fi clues. We leverage the fact that Wi-Fi signals carry discriminative information of human actions, which is robust to optical limitations. To validate this innovative thought, we conceive a practical framework for HAR and setup a dataset containing both video clips and Wi-Fi Channel State Information of human actions. The 3D convolutional neural network was used to extract the video features and the statistical algorithms were used to extract radio features. A classical linear support vector machine is employed as the classifier after the video and radio feature fusion. Comprehensive experiments on this dataset achieved desirable results with the maximum improvement in accuracy by 10%. This demonstrates our promising findings: with the aid of Wi-Fi Channel State Information, the performance of the video action recognition methods can be improved significantly, even under the optical limitation.