Wireless Communication Technologies: New Multimedia Systems

The rapid growth of wireless communication systems and devices has increased global energy consumption in wireless communication networks. Therefore, wireless communication technologies are advancing towards the development of fifth-generation wireless communication systems and beyond, i.e., towards the development of sixth-generation wireless communication systems. It is important that the energy efficiency of wireless communication systems considered a significant parameter along with data rate, delay and reliability. Green wireless communication systems aim to reduce the power consumption of wireless communication systems minimize carbon emissions and make wireless communication systems environmentally sustainable. This paper presents a comprehensive review of sustainable wireless communication systems and energy-efficient protocols for green wireless communication systems. This study discusses various architectural strategies such as energy-efficient base stations, heterogeneous and ultra-dense networks, cloud radio access networks, adaptive networks, renewable energy and their role enables wireless networks to modify their behavior according to the nature of the data and availability of resources. Further, the paper discusses the role of sustainable wireless protocols in all layers of wireless communication, where techniques like power control, duty cycle, energy-efficient routing and transport protocols are playing a significant role in removing the unnecessary communication and utilizing resources efficiently. It also discusses enabling technologies that can be utilized in energy-efficient network operation including energy harvesting, cognitive radio, artificial intelligence, edge computing and network virtualization. Moreover, some of the major challenges in energy-efficient wireless communication including decisions, complexity, security, cost, and regulatory issues, are addressed. This study provides an sustainable wireless communication can be achieved based on recent developments and existing research gaps in wireless communication particularly in future 5G and 6G networks.

The objective of this presentation is to illustrate that an electromagnetic macro modeling can properly predict the path loss exponent in a mobile cellular wireless communication system. This represents the variation of the path loss with distance from the base station antenna. Specifically, it will be shown that the path loss exponent is 3 preceded by a slow fading region and followed by the fringe region where the path loss exponent is 4. The size of these regions is determined by the height of the base station antenna. The relevant theory starts from the analysis of radiation from a vertical electric dipole situated over a horizontal imperfect ground plane as first considered by Sommerfeld in 1909. The various methods used to evaluate the Sommerfeld integrals are described for different regions. Then, accurate numerical analyses and experimental data will illustrate the above statements, validating the theory. Moreover, the experimental data reveal that a macro modeling of the environment using an appropriate electromagnetic analysis can accurately predict the path loss exponent for the propagation of radio waves in a cellular wireless communication system scenario without needing to recourse to other types of micromodeling.

The fifth generation (5G) wireless systems have been begun to be widely deployed over the world in recent years. As the 5G technology will not be able to meet the demands of the huge data traffic growth from massively interconnected devices that is forecasted for future years, the attention of the research community is shifting toward what will be the next innovations in wireless communication architectures and technologies for beyond 5G. The topic of beyond 5G wireless communication technologies has gained much momentum in the industry and the research community very recently. In this issue of IEEE Wireless Communications, we are pleased to present two Special Issues to bring together researchers, industry practitioners, and individuals working on the related areas to address some of these technical challenges for 5G and beyond wireless communication technologies. The Special Issue on “6G: The Paradigm for Future Wireless Communications” includes a collection of nine articles presented by Guest Editors S. Mumtaz, C. Jiang, A. Tölli, A. Al-Dulaimi, M. Butt, H. M. Asif, and I. Ashraf; the other Special Issue, on “Smart, Optimal, and Explainable Orchestration of Network Slices in 5G and Beyond Networks,” includes a collection of five articles presented by Guest Editors Z. M. Fadlullah, M. M. Fouda, K. Rabie, and R. Li. Thanks to the two Guest Editor teams who did an excellent job in editing these two Special Issues for our readers. Please stay tuned for new developments in the research area of beyond 5G wireless communication technologies, and read the editorials and the articles in the Special Issues.

It is well known that the performance of the wireless communication systems can be enhanced by using multiple transmit and receive antennas, which is generally referred to as the MIMO technique, and has been incorporated into the IEEE 802.11n standard, i.e. one of the Wi-Fi systems. The MIMO technique has also been adopted by the 3GPP Long Term Evolution (LTE) and the 3GPP2 Ultra Mobile Broadband (UMB) standards. The space-time coding is a promising way to realize the gain in the wireless communications system using MIMO. The space time block code, and the orthogonal space time block code in particular have been proposed in research and implemented in practical wireless communication systems due to their low computational complexity in maximum likelihood decoding implementation. However, the code rates of the orthogonal space time block codes are usually lower than $3/4$ when the number of transmit antennas is greater than two, which limit their throughput. To increase the code rate and the throughput of the orthogonal space time block code for more than two transmit antennas, a family of new space-time block codes (STBC) for 3 and 4 transmit antennas in a MIMO wireless communication system have been proposed in this Ph.D. research. These new codes are orthogonal and achieve full diversity, full rate using Triple QPSK'' modulation, which is proposed in this research. We investigated the performance of these STBCs when the channel state information (CSI) is perfectly known at the receiver. The CSI is not known to the transmitter in all of the studies in this dissertation. An analytical bound of the probability of bit error is developed and the Monte Carlo simulation is used when investigating these new STBC codes. In practical wireless communication system, the CSI is generally not available at the receiver and it is usually estimated by the receiver through the pilot signals or training signals known to the receiver. No matter what channel estimation method is used, the estimate of CSI will not match the CSI exactly and is noisy. The performance of these new STBCs using theTriple QPSK'' modulation when the estimate of the CSI is employed to detect the symbol is investigated in this dissertation. An upper bound of the bit error probability is developed when the noisy CSI is used to detect the symbols. The performance of the new STBCs using the Triple QPSK'' modulation is also evaluated using Monte Carlo simulation. When the CSI is not available to either the receiver or the transmitter, the differential encoding and decoding algorithm is applied to these new STBCs, which use theTriple QPSK'' modulation. The results showed that these orthogonal STBCs achieve full diversity full rate using ""Triple-QPSK"" modulation with differential detection. This provides a means of achieving space diversity and multiplexing gain without the CSI. A new differential encoding and decoding algorithm is proposed and analyzed for STBCs with 3 transmit antennas, whose transmission matrix is not square matrix, as part of this Ph.D. research. The STBCs using this algorithm achieve full diversity the MIMO system can possibly provide.

Vehicle-to-vehicle and vehicle-to-infrastructure wireless communications are currently under development to improve traffic efficiency and safety. The time-critical nature of road safety applications imposes the need to accurately dimension the operation and performance of wireless vehicular communication systems. Given that radio propagation modeling has been shown to importantly affect the performance of traditional mobile and wireless communication systems, this work investigates its impact on the dimensioning of traffic safety wireless vehicular communications by separately analyzing the contributions of pathloss, shadowing and fast fading.

Physical layer security (PLS) in wireless communication systems has attracted extensive research attentions in recent years. Unlike cryptography-based methods applied in upper-layer in network, PLS methods are applied in physical layers and can provide information-theoretic security by utilizing the randomness of signals and wireless channels. In this survey, we provide a comprehensive review in the domain of physical layer authentication (PLA) in wireless communication systems, including the concepts, several key techniques of typical PLA architectures as well as future challenges and research trends in more sophisticated communication systems. The survey begins with an overview of the background and basic concepts of PLA, such as the general model of wireless security communication system, typical frameworks of key-based/less PLA systems, and the common attack models. We then discuss the major concerns and key techniques that are applied in PLA systems, where three types of authentication schemes are considered, i.e., the authentication based on channel information, radio-frequency and identity watermarks. Basic models and representative research results about key approaches and techniques applied to the authentication systems above are subsequently covered. Finally, the associated challenges and potential research trends of PLA in future communication systems are presented at the end of the survey paper.

The Orbital Angular Momentum (OAM) wireless communication technology has received much attention in recent years for its natural orthogonality between different OAM states. Combining the OAM technology with the Orthogonal Frequency Division Multiplexing (OFDM) technology, we proposed a new OAM-OFDM wireless communication system to explore a new approach for enhancing the transmission capacity of the wireless communication system. Atmospheric turbulence is an important factor for influencing the capacity of the OAM-OFDM wireless communication system. In consideration of the effect of the atmospheric turbulence, we derived a crosstalk model of the proposed OAM-OFDM wireless communication system. Furthermore, a capacity model of the OAM-OFDM wireless communication system is proposed in consideration of the effect of atmospheric turbulence on both the OAM and OFDM signals. Compared with the conventional OAM wireless communication system, the capacity performance of the proposed OAM-OFDM wireless communication system is significantly improved and the average improvement is 751%.

It is important to design a spectrum-efficient and power-efficient wireless communication system, which is the main design target in cellular and wireless communication engineering. Basically, to make it, the desired system must have a low peak-to-average power ratio (PAPR), low-level of out-of-band (OOB) power emission and can provide a high throughput. In this paper, we propose a high-throughput cellular communication system, namely Discrete Fourier Transform-Spread Windowing and Restructuring Orthogonal Frequency Division Multiplexing (DFT-Spread WR-OFDM), which has considerably low PAPR and low OOB power emission for upcoming next-generation beyond 5G (B5G) and 6G cellular communication systems. High PAPR is still one of the challenging issues for the MIMO-OFDM system. The proposed system is an effective arrangement of DFT-Spreading and windowing techniques to reduce PAPR and OOB power emission, respectively. Multiuser diversity is obtained using localized subcarrier mapping. We take advantages of spatial multiplexing to enhance the data throughput significantly. Additionally, frequency-domain equalization (FDE)-minimum mean squared error (MMSE) is used to combat the inter-symbol interference (ISI) effect. Simulation results verify that the suggested system considerably lowers PAPR and OOB power emission compared to the conventional systems. Furthermore, the proposed scheme shows better bit error rate (BER) performance over the MIMO Rayleigh fading channel environment. Simulation results also confirmed that the channel capacity of our suggested system is better than the conventional multi-carrier systems.

In order to solve the problems of low-risk assessment accuracy and long time-consuming assessment of current wireless mobile communication systems, a wireless mobile communication system based on artificial intelligence algorithms is proposed. First, the research status of risk assessment of wireless mobile communication system at home and abroad is analyzed, and the risk assessment index system of wireless mobile communication system is established; then, the learning samples are collected according to the risk assessment index system of wireless mobile communication system, and artificial intelligence algorithm is used to optimize the neural network. Build the wireless mobile communication system risk assessment model; finally, carry out the wireless mobile communication system risk assessment simulation comparison test. The experimental results show that the accuracy rate of the risk assessment of the wireless mobile communication system by the artificial intelligence algorithm is over 95%, and the assessment error is smaller than in other models. The risk assessment time of the wireless mobile communication system is significantly reduced, the real-time performance is better, and it has a higher practical application value.

The interconnection of all things and industrial integration is the current trend of the times. Among them, the interconnection of all things is the demand of informationization of the times, and the industrial integration is the demand of industrial development. The interconnection of all things is realized based on wireless communication technology. It is necessary to combine the development of the tourist area and the surrounding culture. The relationship between tourist attractions and culture needs to be fully and effectively developed. In order to fully explore the advantages of the cooperation between the two, it is necessary to combine modern technology to package the tour process of each characteristic culture of the scenic spot. Virtual reality is a modern technology that can combine culture and tourism. Wireless communication and VR technology are applied to the development of integration of culture and tourism. The process of tourism will promote profound changes in the tourism model. Under the demand for informatization in various industries, the tourism industry is gradually developing in this direction. The integration of culture and tourism will also be driven by informatization and technology. This paper analyzes the current situation of culture and tourism, summarizes the problems existing in the current process of integration of culture and tourism, and finally puts forward targeted solutions. Mainly in the process of the integration and development of tourism and cultural industries, the traditional culture and scenic spots are the basic factors, combined with wireless communication and virtual reality technology, to develop a tourism industry with technological characteristics of the new era.

A key engine propelling the semiconductor market growth in wireless communications is the continued advancement of analog/mixed-signal (AMS) and radio frequency (RF) integrated circuits (IC). The circuit and technology requirements for analog/mixed-signal and RF IC in wireless communication systems are quite different from those for digital logic and memory IC. The requirements vary dramatically for different wireless communication applications and often are in conflict with each other due to device, technology, and circuit limitations. This paper reviews the development and generation of the first dedicated roadmap of analog/mixed-signal and RF IC technologies for wireless communications in the 2003 International Technology Roadmap for Semiconductors and highlights the current and future challenges and opportunities.

The coexistence of broadband systems with currently deployed Professional Mobile Radio (PMR) communication systems like Public Protection and Disaster Relief (PPDR) has gained much deserved attention. In the recent literature, it has been suggested that LTE-like FBMC-OQAM system working on linear devices can coexist in PMR band, while conventional OFDM-based LTE system fails. When we take into account, the RF impairments in radio communication systems; it is inevitable to consider the non-linear nature of High Power Amplifiers (HPAs), as they add severe hindrance in this aspect. In this paper, we address this issue and show that LTE-like FBMC-OQAM system working on non-linear devices can still co-exist with PMR/PPDR systems, when suitable peak-to-average power ratio (PAPR) is applied.

The wireless optical communication is a kind of broadband access technology, it can be said that it properly combined with the optical fiber and wireless communication technology. More to say, it is a powerful supplement of modern optical fiber communication. In this paper, based on the advantages of wireless optical communication technology, this paper introduces the wireless optical communication technology in the application of 2G network, 3G network and extends the application in backbone network, and analyzes the common problems and solutions in the wireless optical communication. With the advance of technology, the wireless optical communications technology development prospects will be more and more broad, is worthy of popularization and application.

This is the second issue of Wireless Communications and Mobile Computing (WCMC) published by John Wiley & Sons, Ltd. The first issue was published ahead of time and presented some excellent review papers from experts in the field. We received great feedback from a number of colleagues about its content and we promise to continue producing excellent issues in the future. If you did not receive your sample copy of the inaugural issue, please let me or any of the regional editors know to arrange to send you a copy. We have selected seven papers to appear in this second issue. These papers span a good range of topics in the area. The first is a review paper by Ralph and Aghvami. They discuss the Wireless Application Protocol (WAP) architecture and characteristics. Then, they investigate the devices that are supported by WAP as well as the drivers and services. These services include quality of service, security, billing, interoperability, and performance engineering. The variety of media types combined with the diversity of Internet connection characteristics raises momentous challenges to the achievement of ubiquitous access to Internet multimedia content. The second paper, by Margaritidis and Polyzos, addresses issues related to this topic. They identify the importance of adaptation to this category. Then, they examine several important factors that influence the design and optimization of the adaptation architecture. In conclusion, they describe current commercial solutions and future trends in application adaptation in conjunction with recent developments towards wireless access to the Internet. The third paper, by Havinga and Smit, discusses also wireless multimedia networking, but focuses more on energy efficiency. The authors identify three key problems and provide possible solutions to overcome them. The efficient management of power-controlled cellular wireless systems is necessary for their deployment success. Power control can be used as a platform for radio resource management and is important for channel fading as well as providing QoS to individual users. Xiao, Shroff and Chong review the developments of distributed power control and related resource management problems in cellular wireless systems. The discussion is concentrated on achieving high efficiency for a power-controlled system while preventing the system from failure. They then review power and rate control schemes proposed for wireless data, and present a framework for utility-based power control as a possible candidate for distributed power control of multimedia wireless systems. In the fifth paper, Arslan and Bottomley review commonly used approaches to channel estimation. This is necessary in adaptive receiver designs used in narrowband and wireless digital communication systems. They consider both time-invariant and time-varying channels in their discussion. They also provide a number of applications that will make use of this standard. On the other hand, Tepedelenliolu, Abdi, Giannakis and Kaveh talk about estimation of Doppler spread and signal strength in wireless systems. They concentrate on estimating the received signal strength, mobile velocity, and other related statistical channel parameters that apply to handoff and adaptive transmission. They provide comparison of the presented schemes based on their modeling and simulation results. Finally, Annamalai and Tellambura present a research paper discussing three new exponential-type bounds derived using the Cauchy–Schwarz bounding technique. They show that these new bounds are found to be tight and useful for a number of applications. They compare these bounds to other well-known exponential type bounds and prove that these perform at least comparable or tighter. We hope that you will enjoy reading this issue and welcome any comments to any of the four editors listed below. Again, we welcome all of you to contribute and encourage your colleagues and libraries to subscribe to this fine publication.

The subject of research in this article is the process of building a mobile communication system that operates under electronic countermeasures. The aim is to develop recommendations for building a wireless mobile communication system that operates effectively in a complex interfering electromagnetic environment. The strategy for building a mobile wireless communication system is based on the use of a grouping of low-altitude UAVs with ultra-wideband signal technology circulating in control and communication channels, with the integration of artificial intelligence elements into its structure. The objective of this study is to ensure the stable and secure operation of a wireless mobile communication system despite electronic countermeasures. The methods of analytical, temporal positional pulse coding, and fuzzy logical inference were used to make decisions on the transfer of service in the network. The following results were obtained. A strategy for building a wireless mobile communication system despite electronic countermeasures has been developed. It is shown that in order to obtain high noise immunity of control and communication channels and to protect information from interception, wireless ultra-wideband communication technology should be used. This will provide large volumes and speeds of information transmission. A technical solution for the design of an ultra-wideband transceiver antenna system is proposed. Moreover, it is recommended to use the results of data processing in a fuzzy decision-making system for the transfer of service between mobile network nodes in conditions of interference. Conclusions. The scientific novelty of the obtained results is as follows. The use of ultra-wideband channels makes it possible to increase the number of control and communication channels in a wireless mobile system almost unlimitedly. The preliminary distribution of orthogonal codes between the channels realizes the process of control and communication without the interception of information and mutual interference. The use of the time-position-pulse coding method prevents the occurrence of intercharacter distortions of the encoding ultrashort pulses. This also reduces the level of distortion of information signals caused by multipath propagation, which guarantees the security of information in the system. The use of a fuzzy decision-making system for the transfer of services between mobile network nodes allows dynamically changing the network topology in real time and maintaining high quality of service under electronic countermeasures.