Wireless Sensor Network Technology and Its Application Potentials for Service Innovation in Supply Chain Management

The growing awareness of the strategic value of service along with higher product performance expectations has directed many industries to adopt service centric competitive strategies in managing their supply chains. Service innovation based on currently available advanced technologies has become critical in improving enterprises’ competitive strengths. Wireless sensor network (WSN) technology, which can provide a mobile, scalable, and reliable monitoring solution, is emerging as a tool for service innovation in supply chain management. This paper provides an overview of wireless sensor network technology and discusses how it can benefit modern industries. The fundamental theories of WSN are introduced as well as an overview of the development. The impact of information technologies on supply chain management and service innovation is then briefly discussed. Much emphasis is placed on the feasibility, procedures, and critical challenges of implementing WSN in supply chain management innovation. Current and future applications of WSN are also provided, followed by a case study demonstrating the application potentials of WSN for service innovation in the healthcare industry.

This paper mainly introduces the application of multichannel communication technology in wireless sensor network. The corresponding solutions are proposed based on the analysis of the structure and characteristics of wireless sensor, and the multi-channel MAC protocol in wireless sensor network. In this paper, multi-channel communication technology in wireless sensor network (WSN) is studied, the existing problems and reasons are analysed, and some solutions to further promote the further development of the technology are put forward. With the wide application of WSN, the security of WSN has been paid more and more attention. In this paper, the existing time synchronization protocol, from the security point of view, and the fault tolerance design of the fits protocol. The protocol has an intrusion detection mechanism, which can detect the attack of malicious nodes in time synchronization. Aiming at the small deviation of slow attack and the problem of time synchronization error, information fusion is based on the quality principle, and according to the time synchronization information of different nodes, we make random weighted average correction for local time nodes. The simulation results show that the fits time synchronization protocol has good intrusion detection and fault tolerance capability.

Recently, the technology of wireless sensor networks (WSNs) experiences a growing use in home automation or advanced industry infrastructure applications. Despite a strong interest of industries in this technology, key issues like miniaturization and security of WSN nodes has not been solved yet. State-of-the-art WSN nodes do not provide credible security nor satisfying configurability and miniaturized implementations. This publication deals with these limitations and presents a WSN node that provides security, configurability, and a miniaturized design. To show the sensor node feasibility, the WSN node is implemented within a smart home demonstrator. Additionally, a miniaturized pre-study WSN node design is presented using the novel embedded wafer level ball grid array (eWLB) packaging technology. Furthermore, an eWLB based WSN node design is proposed that further miniaturize the presented WSN node.

This work presents a solar power based water quality monitoring wireless sensor network (WSN) technology, to screen water quality over various destinations as an ongoing application, an astounding framework engineering comprised by disseminated sensor nodes and a base station is proposed. The model and base station are associated utilizing WSN innovation like Zig-Bee. Modeling and implementation of a proposed model using one node powered by solar cell and WSN technology is the challenging work. Data collection by different sensing element at the node side like pH, turbidity conductivity, saltiness and temperature is sent by means of WSN to the base station. Information gathered from the distant site can be shown in visual organization too as it very well may be examined utilizing diverse reproduction apparatuses at base station. This original framework has benefits like no fossil fuel byproduct, low power utilization, more adaptable to send data at far off site, etc.

Wide usage of wireless sensor network (WSN) is the reason for development of many routing protocols. Recent advances in WSN observe the increased interest in the potential use in applications like Military, Environmental, Health, Vehicular, Mechanical stress levels on attached objects, disaster management etc. Wireless sensor networks are callously restricted by storage capacity, energy and computing power. So it is essential to design an energy efficient aware protocol in order to augment the network lifetime. WSN also has the influencing features to perform remote communication, it is also shrouded with various loopholes in its precise operation, where majority of the communication issues are raised from deployment of existing standards of routing protocols and algorithm. Sensors are expected to be remotely deployed in unnoticed environments. Routing as one key technologies of wireless sensor network has now become very important research work because the applications of WSN is everywhere, it is impractical that there is a routing protocol suitable for all applications. In this paper, a review on routing protocol in WSNs is carried out which are classified as data-centric, hierarchical and location based depending on the network structure. Then some of the multipath routing protocols which are widely used in WSNs like Multipath Multispeed Protocol (MMSPEED), Braided Multipath Routing Protocol, Energy-Aware Routing to improve network performance are also discussed. Massive research work has already been carried out in past to introduce some of the effective routing protocols to enable robust communication system in WSN. Advantages and disadvantages of each routing algorithm are discussed thereafter. This paper also discusses the critical open issues that are yet to be solved. This paper compares and summarizes the performances of routing protocols.

This paper proposes an architecture based on Wireless Sensor Network (WSN) technology for intelligent guiding of a transportation network. Based on this architecture, a complete case study of intelligent guiding and controlling system (IGCS) is presented. Simulation results show that the system is satisfactory.

Air pollution is one of environmental issues that have been often discussed. The fast-growing population and urbanization result in the population concentrated in certain areas. Heavy transportation may lead to poor air quality, and inhaling pollutants for a long time also causes damages in human health. A traditional air quality monitoring method is to build air quality monitoring stations, but this method is expensive and provides low resolution sensing data. In addition, monitoring stations are generally less densely deployed. This paper proposed an urban air quality monitoring system based on the wireless sensor network (WSN) technology and integrated with the global system for mobile communications. The system consists of sensor node, a gateway, and a back-end platform controlled by the LabVIEW program through which sensing data can be stored in a database. This system is deployed to the main roads in the Taipei city to monitor the carbon monoxide (CO) concentration caused by vehicle emissions. The experimental results show that the proposed system can provide micro-scale air quality monitoring in real-time through the WSN technology.

Over the past decades, hardware and software technologies for wireless sensor networks (WSNs) have significantly progressed, and WSNs are widely used in various areas including Internet of Things (IoT). In general, existing WSNs are mainly used for applications that require delay-tolerance and low-computation due to the poor resources of traditional sensor nodes in WSNs. However, compared to the traditional sensor nodes, today’s devices for WSNs have more powerful resource. Thus, sensor nodes these days not only conduct sensing and transmitting data to servers but also are able to process many operations, so more diverse applications can be applied to WSNs. Especially, many applications using audio data have been proposed because audio is one of the most widely used data types, and many mobile devices already have a built-in microphone. However, many of the applications have a requirement that heavy-operations should be done by a tight deadline, so it is difficult for a single node in WSNs to run relatively heavy applications by itself. In this paper, to overcome this limitation of WSNs, we propose a new emerging system, HeaLow, a cooperative computing system for heavy-computation and low-latency processing in WSNs. We designed HeaLow and carried out the practical implementation on real devices. We confirmed the effectiveness of HeaLow through various experiments using the real devices and simulations. Using HeaLow, nodes in WSNs are able to perform heavy-computation processes while satisfying a completion time requirement.

Wireless Sensor Network (WSN) have been attracting increasing interest for supporting a new generation of ubiquitous computing systems with great potential for many applications. However, the communication paradigms in WSNs differ from the ones associated to traditional wireless networks, triggering the need for efficient wireless communication technology. Several wireless technologies have emerged ranging from short and medium distance. Bluetooth, ZigBee and Impulse Radio Ultra Wide Band (IR-UWB) are three popular short range wireless communications. Due to its various features and advantages (especially low power consumption and low complexity), IR-UWB is a very promising wireless communication technology for WSN. In this paper, we evaluate the main features and advantages of this new technology (IR-UWB) for WSN in terms of transmission time, data coding and power consumption compared to Bluetooth and ZigBee. To analyze and evaluate the main features and advantages of IR-UWB as an efficient short range wireless communication technology for WSN, we used MiXiM platform under OMNet++ simulator.

Recently, wireless sensor network (WSN) technology has been widely used in various fields such as public safety applications since it provides a wide range of surveillance and monitoring applications with an inexpensive price. In this paper, we investigate the use of wireless sensor network technology for fire detection and rescue system. We propose a framework, which can detect fires promptly and support rescue activities, using wireless sensor devices. Our framework consists of fire detection sensor network, information gathering layer, middleware, and escape support system. We have implemented a test-bed and evaluated the performance of fire detection via experiments.

The technology of wireless sensor networks (WSNs) is in constant development and it made great progress in many applications. One of the most popular problems in WSNs is the limited energy storage power at every sensor node. This paper aims to propose and develop a new distributed clustering algorithm for energy harvesting wireless sensor networks denoted by DEH-WSN (Energy Harvesting for Distributed Clustering Wireless Sensor Networks Protocol) that relies on matching between clustering and energy harvesting in a distributed topology. DEH-WSN uses initial and residual energy capacity of the nodes to choose cluster heads. Simulation results prove that the proposed method increases network lifetime and the effective throughput.

The railway sector is one that sees a significant number of incidents on a daily basis. The inspection of railway tracks for defects makes use of a diverse array of technological methods. The technology of wireless sensor networks is now employed in the railway sector to identify faults such as track cracks, track misalignment, and bridge cracks. Many different kinds of tests are carried out in order to identify problems with railway tracks. The sensors that make up a wireless sensor network get their power from very tiny batteries. Therefore, in order to connect with the base station, they were necessary to utilise a tiny amount of electricity. In the event that a sensor fails, critical data will be unable to reach the base station. Currently use the LEACH algorithm in order to save the sensor batteries and increase the lifespan of the wireless sensor network. After that, execute more algorithms that save energy, compare the outcomes, and choose the method that provides superior performance for wireless sensor networks. There are some parameters that need to be improved, such as the amount of time, the dead node, the energy of the sensor, and the position.

Intelligent public transportation system is an effective way to improve the quality of our country transportation. Wireless sensor network is a novel technology made by the convergence of sensor technology, micro electro mechanism technology, wireless telecommunication technology and network technology. It is suitable to transportation scenarios for the characteristic of rapidly deployed and self organized. An improved solution combined the wireless sensor network and internet technology is presented in the article. It effectively solves three critical problems of the wireless sensor network, including energy saving, localization and communication distance. By using the low cost and high stability microchip, a high reliability and low cost intelligent public transportation system based on wireless sensor network can be easily established.

The study introduced foreign and domestic situation of wireless sensor network technology in precision agriculture in detail. Applications of wireless sensor network are universal in foreign precision agriculture, however in its beginning stage in domestic agriculture. The function of domestic system based on wireless sensor network is usually positioning measurement and processing of agriculture elements, which does not meet final requirement of precision agriculture. The study designed a universal wireless sensor network for M2M combined intelligent communication technology and big agriculture machinery. The key technologies of wireless sensor network for M2M include development plan of ISA SP100.11a, spectrum technology based on DSSS, network technology based on net routing and low power radio frequency design, which can meet the real-time character, reliability, robustness and low energy consumption requirement of wireless communication in precision fruits. Moreover, the study presented several typical applications in precision fruits (including farming machine, water-saving irrigation machine and picking machine). With development of precision fruits in breadth and depth, integration application of wireless sensor network would have a widen prospect in the future.

Having achieved significant improvements in manufacturing, many firms are now focusing their attention on their supply chains. With increased globalisation, supply chains for most products have become longer both on the input as well as the output sides. This, combined with the trend towards proliferation of products makes management of the supply chain a very challenging task. In this paper, we review some of the recent strategic and technological innovations in the management of manufacturing supply chains. We specifically discuss innovations in management of product and information flows in the supply chain. In the management of product flows, the innovations include concepts such as modularisation, postponement, mass customisation and flexible automation, time-based logistics, and cross docking. In the management of information flows, the innovations include the use of information technologies and strategic partnerships to improve the transparency of information. We also review the specific strategies that use the enhanced information flows such as continuous replenishment, vendor managed inventory, quick response and efficient consumer response.