Aligned with the circular economy framework, this study aims to address pertinent research gaps regarding material and chemical properties of clothing and suitability for closed-loop applications. Primary research questions include: (1) what are the material and chemical properties of post-consumer textile waste from a sustainable fashion take-back program; (2) which natural post-consumer textile waste is most suitable to support the growth of natural dye plants in a hydroponics system; and (3) can the use of post-consumer textile waste in a hydroponics system be scaled to support a circular fashion supply chain? This study focuses on wool, cotton, linen, silk, rayon, and Tencel® lyocell as substrates to nurture the growth of purple basil, a natural dye plant. Vertical hydroponics is a farming method that uses nutrient water to grow plants in place of soil throughout the year. The system can be indoors, making resourceful use of limited space available and the water is recirculated. Standard hydroponic substrates, like peat moss and rockwool, have good porosity for oxygen transport and suitable moisture holding capacity for nutrient delivery. In this study, we compared the performance of the standard hydroponic substrates with various textiles. The impact on water quality, color release, moisture wicking, stability against degradation, and survival rate of the plants was used to evaluate suitability in the application. Wool, silk, and Tencel lyocell demonstrated good durability in the hydroponic system, like peat moss and rockwool, during the first growth cycle. During the second growth cycle, protein fibers—wool and silk—supported plant survival at a greater capacity than Tencel lyocell. Future research can confirm that wool and silk can support the growth of natural dye plants with a larger sample size. This research aligns with several circular economy objectives and provides a model for future research to support circular fashion supply chains.

The raw material acquisition stage of wool involves raising sheep and a large amount of input and output, resulting in substantial greenhouse gas emissions. To date, the research literature on wool carbon footprint is limited, and there is a lack of research on Victoria. These studies did not consider the influence of changes in weight and productive lifespan. This study aims to address this knowledge gap by calculating the wool carbon footprint in Victoria and improving the calculation method. In this article, 20,000 sheep in Victoria were investigated. The average weights of the sheep were obtained by curve fitting and calculating. Two scenarios with 5-year and 6-year productive lifespans were used to calculate the carbon footprint of merino wool by the mass allocation method, economic allocation method, and protein mass allocation method. Results revealed that the carbon footprint of wool for the 5-year and 6-year productive lifespans were 14.158–49.040 kg carbon dioxide equivalent (CO2-e)/kg wool and 16.743–52.882 kg CO2-e/kg wool. Rumination and excretion accounted for the largest proportion, followed by phosphate fertilizer, electricity, and potash fertilizer. The longer the productive lifespan and the heavier the sheep, the greater the greenhouse gas emissions from rumination and excretion, leading to a larger carbon footprint for wool. For the same productive lifespan, the economic allocation method produced the highest carbon footprint for wool compared to the mass allocation method, which produced the lowest carbon footprint. This study provides a reference for the subsequent carbon footprint accounting of wool from cradle to farm-gate and helps the wool industry save energy and reduce emissions.

Despite the fact that textile waste is almost entirely recyclable, approximately 75% of it ends up in landfills worldwide. This has serious environmental and economic consequences. This review focuses on textile waste statistics, its contribution to pollution and recycling, as well as the benefits, barriers, types, and technologies of textile waste recycling. Textile production and textile waste generation have increased alarmingly as a result of fast fashion, which emphasizes low-cost production, frequent consumption, and short-term use of garments. This industry is distinguished by scarcity of resources, excessive consumption, and the generation of large amounts of waste. The frequency of consumer purchases is increasing, while the life span of clothing is drastically decreasing. Recycling does not occur as expected for a variety of reasons, so the environmental impact and economic losses from this waste grow over time. The textile industry currently contributes about 8% of the global carbon budget and 20% of industrial water pollution. Every year, $500 billion is lost to the system due to unused clothing and a lack of recycling. A paradigm shift is urgently required to implement an effective textile waste recycling system.

A mixture of minerals consisting of calcite, dolomite, talc and quartz, known to have infrared (IR) reflecting properties, was mechanically treated and dispersed in aqueous medium and incorporated in viscose solution to be physically entrapped into the fibre structure. The process of incorporation of the mineral mixture in viscose dope involved steps of slurry making by suspending and grinding the particles in aqueous medium followed by mixing the slurry with the viscose dope, ready for spinning. The slurry preparation and grinding were carried out under different mechanical conditions, such as ball milling and ultrasonication. The evaluation of particle size of slurry was carried out under two pH conditions, first at the inherent pH (neutral pH 7) and at high pH (alkaline pH 13) equivalent to the pH of viscose dope. Furthermore, for stable slurry making, different surfactants were used. The phosphate ether-based anionic surfactant was found to effectively stabilize the dispersion better under the pH conditions used. The effect of stable slurry on good spinning was validated through an inline pressure gauge during viscose fibre spinning. To assess the IR reflecting property of viscose fibre, a direct visual evaluation was done through an IR camera, which indicated a significant increase of ~2°C surface temperature of the IR-Viscose Staple Fibre (VSF) in comparison with control VSF.

Nylon fibers were the first synthetic fibers to be produced on an industrial scale, and they are one of the most consumed synthetic fibers due to their visual and usage properties. Reactive dyes have been commercially produced since the mid-20th century, and they are mostly preferred in dyeing cellulosic fibers. The most important property of reactive dyes is their ability to make covalent bonds within the fiber. Mordants are used mainly in the application of natural dyes to hold and retain the dye molecules in the fiber. In this paper, nylon fabrics were dyed with three reactive dyes having different reactive groups (monochlorotiazine, trifluoropyrimidine and monochlorotriazine/vinylsulfone) in the presence of three chemical mordants (iron (II) sulfate, potassium aluminum sulfate and tannic acid) to obtain better exhaustion and coloration properties. Pre-mordanting, meta-mordanting, and post-mordanting processes were used for dyeing. The dyeings were performed at two dyeing concentrations (0.5% and 2% owf), and at three pH levels (pH 2, 4, and 6). The percentage of dyebath exhaustion (%E), the percentage fixation of the dye which exhausted (%F) and the overall percentage fixation (%T) were calculated after pyridine extraction. Wash and light fastness tests were applied on the dyed samples. The results were discussed via % E, % T and CIELAB color differences (Δ Eab*). The results revealed that mordant usage improved the coloration properties of reactive dyes on nylon fabrics. The % E and % T results changed according to the independent variations of pH level, mordant chemical and mordanting method. The correct pH level and mordanting method gave the best dyeing and fastness results for the dyes under test.

The impact of stitch density and seam type on tactile properties of seams has been investigated. Lapped seam 1 (LSa-1) using stitch class 605 and superimposed seam (SSa-2) using stitch class 514 (ASTM 6193) were constructed with four different stitch densities, namely, stitches per inch (SPI) 10, SPI 14, SPI 18 and SPI 22, and the tactile properties of seams examined by evaluating the characteristics of seams such as seam compression, seam thickness, seam bending behaviour and surface friction of seams. From the study, the optimized stitch density has been identified as SPI 10 for producing soft seam. Seam class and stitch density play a vital role in determining seam comfort properties.

In this study, we used the new nanobubbles technology to create a green reactive washing process for the textile industry, as one of the most polluting sectors where environmentally friendly process designs are indispensable to protect the environment. With this technology, the possibility of eliminating the soaping-off step from the reactive washing sequence was investigated. For the design of an environmentally friendly reactive washing process, the effects of increasing the process temperature of the soaping-off step as well as the use of oxygen-enriched NBs in all washing steps after reactive dyeing with three different dyes were investigated. The results were evaluated by comparing the color coordinates, strength, and fastness of dyed cotton towels washed according to the conventional and alternative processes as well as examining the absorbance and chemical oxygen demand values of the washing baths. Alternative washings did not cause significant differences in color coordinates, while the lowest color strength and highest fastness values were obtained after washing with nanobubbles. The absorbance graphs showed that the most colorful baths belonged to the first bath of the nanobubble washing regime. Chemical oxygen demand measurements revealed that the alternative washing systems were more environmentally friendly than the conventional ones. Based on the results of this study, we concluded that it was possible to implement more eco-friendly washing methods by eliminating the use of soap.

Dyeing of cotton, viscose, wool, and polyester/viscose blended fabrics has been carried out with the aqueous extract of the roots of Alkanna orientalis plant. Fastness properties and color strength values were investigated in terms of users. Phenolic compounds and cytotoxic activities of ethanol (EtOH) and water extracts were determined. It was found that cotton fabric dyed with the aqueous extract of the roots of A. orientalis plant in the presence of alum mordant gave better depth of shade (K/S). The toxicity studies reveal that the EtOH and the water extracts of the root of A. orientalis exhibited 0% cytotoxicity while the standard cancer drug 5-fluorouracil exhibited 6% cytotoxicity. The overall results of this study show that the roots of A. orientalis can be used in the textile industry, especially for dyeing cotton fabrics.

Researchers used nine woven electrothermal fabrics with different structures and silver-plated filament content. Electrothermal performance was tested and analyzed to select the fabric with the best thermal stability and heating performance for additional testing of fatigue resistance. Results show that at room temperature, electrical resistance decreases with the increase of silver-plated filament content, and the nine fabrics show good thermal stability at various voltages. When the fabric is electrified, the surface temperature distribution of the satin fabric is more uniform, and the satin fabric with 10% silvered filament has the best heating effect. At 3 V, the fabric can reach 60 °C. After 200 power cycles (on and off), the fabric still has good thermal performance and good fatigue resistance. After washing, heating remains effective.

Residential fires are a significant risk factor threatening the health and security of occupants. The purpose of this study was to develop a novel fire-safety product to help occupants safely and quickly evacuate from fire. Residential fire-resistant clothing with an alterable robe-coverall structure was developed according to a functional design procedure. The protection and ergonomic performance of the new fire-resistant clothing were verified by material selection and testing, flame manikin testing, and a simulated evacuation test. The results demonstrated that the fire-resistant clothing could provide essential thermal protection, inhalation protection, tear resistant, and visibility. Moreover, compared to current fire blankets, this fire-resistant clothing integrated the robe and coverall together, providing improved thermal protection and ergonomics, while decreasing skin burn percentage by 30.04% and allowing flexible leg movement.