We present a detailed characterization of fibronectin (FN) adsorption and cell adhesion on poly(ethyl acrylate) (PEA) and poly(methyl acrylate) (PMA), two polymers with very similar physicochemical properties and chemical structure, which differ in one single methyl group in the lateral chain of the polymer. The globular solution conformation of FN was retained following adsorption onto PMA, whereas spontaneous organization of FN into protein (nano) networks occurred on PEA. This distinct distribution of FN at the material interface promoted a different availability, measured via monoclonal antibody binding, of two domains that facilitated integrin binding to FN: FNIII10 (RGD sequence) and FNIII9 (PHSRN synergy sequence). The enhanced exposure of the synergy domain on PEA compared to PMA triggered different focal adhesion assemblies: L929 fibroblasts showed a higher fraction of smaller focal plaques on PMA (40%) than on PEA (20%). Blocking experiments with monoclonal antibodies against FNIII10 (HFN7.1) and FNIII9 (mAb1937) confirmed the ability of these polymeric substrates to modulate FN conformation. Overall, we propose a simple and versatile material platform that can be used to tune the presentation of a main extracellular matrix protein (FN) to cells, for applications than span from tissue engineering to disease biology.

Angiogenesis is one of the important hallmarks of psoriasis. The extension of the superficial microvascular structure and activated pro-angiogenic mediators in psoriasis seem to be important factors involved in the pathology. According to the changes of superficial microvasculature in psoriatic lesions, anti-angiogenic treatment could be a promising therapeutic strategy for psoriasis. The aim of this study was to construct an in vitro vascularized psoriatic skin substitute for fundamental research. Psoriatic fibroblasts and keratinocytes were isolated from psoriatic plaque biopsies, while healthy fibroblasts and keratinocytes, as well as microvascular endothelial cells, were isolated from healthy skin biopsies of cosmetic breast surgery. Psoriatic and healthy skin substitutes with and without endothelial cells were produced using the self-assembly approach. Afterward the substitutes were examined by histology, immunofluorescence studies, and three-dimensional (3D) confocal microscopy. Histological analysis and immunofluorescence staining of specific markers for endothelial cells (von Willebrand, PECAM-1 [CD31], and VE-cadherin [CD144]) and basement membrane component (collagen IV) demonstrated that endothelial cells have the ability to form capillary-like tubes. Moreover, the 3D branched structure of the capillary-like structures and an eagle eye view of them were observed by confocal microscopy. Also the semiquantification of capillary-like tubes (CLTs) was carried out with a 3D eagle eye view of substitutes, and more CLTs were observed in psoriatic substitutes. These results suggest that it is possible to observe 3D capillary-like structures in the self-assembled psoriatic skin substitutes, which could become a good in vitro testing model for anti-angiogenic drug research, and facilitate the study of this complex pathology, which links angiogenesis to its development.

Osteoporotic hip fracture is the most severe kind of fracture with high morbidity and mortality. Patients' ambulation and quality of life are significantly affected by the fracture because only 50% regain their prefracture functional status, even if they undergo surgeries. There are many issues associated with the current preventive methods e.g., cost, side effects, patient compliance, and time for onset of action. Femoroplasty, the injection of bone cement into the proximal femur to augment femoral strength and to prevent fracture, has been an option with great potential. However, until now femoroplasty has remained at the stage of biomechanical testing. No in vivo study has evaluated its safety and effectiveness; there is not even an animal model for such investigations. The objective of this study was to develop a proximal femur fracture goat model that consistently fractures at the proximal femur when subject to vertical load, simulating osteoporotic hip fractures in human. Six pairs of fresh frozen mature Chinese goats' femora were obtained and randomly assigned into two groups. For the experimental group, a cylindrical bone defect was created at the proximal femur, while the control was left untreated. In addition, a configuration to mimic the mechanical axis of the goat femur was developed. When subjected to load along the mechanical axis, all the specimens from the bone defect group experienced femoral neck fractures, while fractures occurred at the femoral neck or other sites of the proximal femur in the control group. The biomechanical property (failure load) of the bone defect specimens was significantly lower than that of the control specimens (p<0.05). Osteoporotic hip fractures of humans were simulated by a goat fracture model, which may serve as a reference for future femoroplasty studies in vivo. The newly developed configuration simulating a femoral mechanical axis for biomechanical tests was practicable during the study.

Human Mpv17-like protein (M-LPH) has been suggested to play a role in mitochondrial function. In this study, we identified a RhitH (human regulator of heat-induced transcription) binding site in intron 1 of the M-LPH gene. Tissue distribution analysis showed that M-LPH was specifically distributed in tissues with high mitochondrial metabolism. Functional and genetic analyses of nonsynonymous single nucleotide polymorphisms (SNPs) in the RhitH gene revealed that p.Cys461Ser, p.Thr465Ala, and p.Leu495Gln, corresponding to substitutions in the zinc fingers, cause reductions in the repression activity that lead to upregulation of M-LPH expression. The analyses also showed that the minor allele frequencies of these SNPs are extremely low in worldwide populations.

ErbB3 is a significant oncogenic target that is involved in the development of numerous malignancies. In the present in silico study, we evaluated the structural and functional impact of single nucleotide polymorphisms (SNPs) on the ErbB3 gene. The nonsynonymous SNPs (nsSNPs) are known to be deleterious or disease-causing variations because they alter protein sequence, structure, and function. Out of a total 531 SNPs in ErbB3, we investigated 77 coding nsSNPs and observed that 20 of them could be expected to alter the protein's function based on the predictions of both sequence homology–based (SIFT) and structural homology–based (Polyphen) algorithms. Thereafter, we computed the stability of mutants in units of free energy using I-Mutant 3.0, MuStab, and iPTree-STAB programs and identified seven crucial point mutations (V89M, V105G, C290Y, I418N, R669C, I744T, and A1131T) in epidermal growth factor receptor 3 that are manifested as nsSNPs. Furthermore, FASTSNP determined 14 synonymous SNPs that may have a profound impact on splicing regulation. The computational study identified seven novel hotspots predicted to maintain the native structural conformation and functional activity of ErbB3 and may account for cancer if mutated.

A reliable and cost-effective scaffold for tissue-engineered vascular graft that would not only support cell proliferation and growth but also maintain cell phenotype has been a long-term challenge. In this study, we propose a biodegradable and biomimetic copolymer of gelatin with vinyl acetate synthesized via a graft copolymerization technique to generate tubular scaffolds for vascular tissue engineering. Two fabrication techniques, freeze drying and electrospinning, were used to generate the differing architectures for the scaffolds and characterized. The electrospun scaffolds were found to have a faster rate of mass loss in physiological saline of 81.72% within 4 months compared with 60% mass loss for the freeze-dried samples, though the materials were more crystalline. Vascular (v) smooth muscle cells (SMCs) were seeded on these tubes, which were then subjected to dynamic pulsatile stimulation on a vascular bioreactor for a week. Gross examination of the tissue-engineered constructs revealed that the cells secreted extensive extracellular matrix, with the dynamically conditioned samples exhibiting well-orientated SMCs and collagenous fibers in comparison with growth in static conditions. In addition, the alignment of cells in the direction of strain was greater in the electrospun constructs. The electrospun scaffolds maintained the characteristic contractile phenotype of SMCs, which was confirmed by higher gene expression rates of contractile protein markers like SM22α and calponin. A significant increase in the total matrix components (collagen and elastin) in the electrospun constructs compared with the freeze-dried samples was confirmed by biochemical analysis. The results of this study indicate that a combination approach involving a biomimetic scaffold with the nanofibrillar architecture and good mechanical strength conducive to the growth of SMCs and the use of the pulsatile forces to modulate the cell morphology and phenotypic plasticity of vSMCs helps in the successful engineering of a medial layer of blood vessel.

Target gene delivery is needed to induce cellular differentiation or a specific therapeutic effect. Electroporation is a relatively safe and simple technique to deliver nucleic acids to the cell that acts by rendering cells transiently permeable using short periods of high voltage. In stem cell research, human dental pulp stem cells (hDPSCS) are highly accessible, and they exhibit broad differentiation potential. Until now, no studies have attempted to optimize electroporation parameters for DPSCs with respect to transfection efficiency and viability. In this study, we aimed to optimize transfection of DPSCs through varying different electroporation parameters, including voltage, mode of pulsation, and the number of pulses. As positive control, we used commonly utilized the chemical transfection reagents Lipofectamine 2000 and FuGene 6. In addition, we used our newly optimized transfection conditions to transfect hDPSCs with a functional chondrogenic transgene. We obtained higher transfection efficiency and cell viability with these electroporation conditions compared to controls. The highest transfection efficiency (63.81±4.72%) was achieved with 100 V, 20 msec, one-pulse square-wave condition. Among chemical transfection groups, FuGene 6 showed the highest cell viability at all tested transfection ratios, while Lipofectamine 2000 showed the highest transfection efficiency (19.23±3.19%) using 1:1 DNA (μg):Lipofectamine (μL). Transfected DPSCs functionally expressed the transforming growth factor β-3 chondrogenic transgene on the mRNA level as detected by real-time polymerase chain reaction and on the protein level as detected by Western blot analysis. An increase in various chondrogenic markers was also found when studying mRNA expression in transfected cells. In conclusion, the results of our study demonstrate optimal electroporation and chemical transfection reagent conditions for hDPSCs, and, subsequently, we provide proof of concept for expression of a functional gene using those conditions. These results demonstrate a widened scope for use of DPSCs in various tissue engineering applications.

We present a simple and robust method to evaluate the transfection efficiency of commercially available transfection reagents intended to be established for use in nonmammalian cell lines. To illustrate the method, we compare the ability of four different reagents to transfect the embryonic zebrafish cell line Z3. Z3 cells were seeded in a 96-well plate and simultaneously transfected in several variations by using minimum volumes of transfection reagent and a vector DNA encoding an amplified version of green fluorescent protein (GFP). After 24 and 48 h, transfection efficiency was determined by a dual fluorescence plate reader measurement of GFP and Hoechst 33342 fluorescence, an indicator of cell density. Of the four different reagents tested, certain variations of JetPrime™ reagent and X-tremeGene™ HP reagent produced the highest fluorescence signal per cell after 24- and 48-h incubation, respectively. The simultaneous multivariate setup enables comparing different reagent/DNA combinations at different time points well, independent of cell growth variability or seeding density.

Inorganic phosphate (Pi) is an essential nutrient for living organisms. It plays a key role in diverse physiological functions, including osteoblast differentiation and skeletal mineralization. Relevantly, Pi is emerging as an important signaling molecule capable of modulating multiple cellular functions by altering signal transduction pathways, gene expression, and protein abundance in many cell types. To our knowledge, the consequences of elevated Pi on behavior of breast cancer cells have been poorly addressed. In this study we investigate the effects of Pi on proliferation of MDA-MB-231 breast cancer cells. We report that Pi inhibits proliferation of MDA-MB-231 cells by slowing cell cycle progression, without apoptosis occurrence. We found that Pi causes cells to accumulate in G1 phase in a time-dependent manner. Accordingly, G1 accumulation was associated with a decrease of cyclin A and cyclin E and an increase of cell cycle inhibitors p21 and p27 protein levels, respectively. Moreover, the Pi-induced antiproliferative effect was dynamically accompanied by profound changes in ERK1/2 and STAT3 protein and phosphorylation levels in response to Pi. Altogether, our data represent the first evidence of Pi acting as a novel signaling molecule in MDA-MB-231 breast cancer cells, capable of eliciting a strong antiproliferative action and suggest that targeting Pi levels at local sites might represent the rationale for developing novel strategies for therapeutic intervention in triple-negative breast cancer.

DNA-cross-linked polyacrylamide hydrogels (DNA gels) are dynamic mechanical substrates. The addition of DNA oligomers can either increase or decrease the crosslinker density to modulate mechanical properties. These DNA-responsive gels show promise as substrates for cell culture and tissue-engineering applications, since the gels allow time-dependent mechanical modulation. Previously, we reported that fibroblasts plated on DNA gels responded to modulation in elasticity via an increase or decrease in crosslinker density. To better characterize fibroblast mechanical signals, changes in stress and elastic modulus of DNA gels were measured over time as crosslinker density altered. In a previous study, we observed that as crosslinker density decreased, stress was generated, and elasticity changed over time; however, we had not evaluated stress and elastic modulus measurements of DNA gels as crosslinker density increased. Here, we completed this set of fibroblast studies by reporting stress and elastic modulus measurements over time as the crosslinker density increased. We found that the stress generated and the elastic modulus alterations were correlated. Hence, it seemed impossible to separate the effect of stress from the effect of modulus changes for fibroblasts plated on DNA gels. Yet, previous results and controls revealed that stress contributed to fibroblast behavior.