Capsular antigen fragment 1 (Caf1) is an oligomeric protein consisting of 15 kDa monomeric subunits that are non-covalently linked through exceptionally strong and kinetically inert interactions into a linear polymer chain. It has been shown that after its thermal depolymerisation into unfolded monomeric subunits, Caf1 is able to efficiently repolymerise in vitro to reform its polymeric structure. However, little is known about the nature of the repolymerisation process. An improved understanding of this process will lead to the development of methods to better control the lengths of the repolymerised species, and ultimately, to better design of the properties of Caf1-based materials. Here we utilize small-angle X-ray scattering to estimate the size of Caf1 polymers during the first 24 h of the re-polymerisation process. Analytical ultracentrifugation measurements were also used to investigate the process post-24 h, where the rate of repolymerisation becomes considerably slower. Results show that in vitro polymerisation proceeds in a linear manner with no evidence observed for the formation of a lateral polymer network or uncontrolled aggregates. The rate of Caf1 in vitro repolymerisation was found to be concentration-dependent. Importantly, the rate of polymer growth was found to be relatively fast over the first few hours, before continuing at a dramatically slower rate. This observation is not consistent with the previously proposed step-growth mechanism of in vitro polymerisation of Caf1, where a linear increase in polymer length would be expected with time. We speculate how our observations may support the idea that the polymerisation process may be occurring at the ends of the chains with monomers adding sequentially. Our findings will contribute towards the development of new biomaterials for 3D cell culture and bio-printing.

Biophysics Austria) and the European Biophysical Societies Association (EBSA), I should like to extend a warm welcome to all of you at the 13 th EBSA meeting in beautiful Vienna.

Microtubules are essential parts of the cytoskeleton that are built by polymerization of tubulin heterodimers into a hollow tube. Regardless that their structures and functions have been comprehensively investigated in a modern soft matter, it is unclear how properties of tubulin heterodimer influence and promote the self-assembly. A detailed knowledge of such structural mechanisms would be helpful in drug design against neurodegenerative diseases, cancer, diabetes etc. In this work atomistic molecular dynamics simulations were used to investigate the fundamental dynamics of tubulin heterodimers in a sheet and a short microtubule utilizing well-equilibrated structures. The breathing motions of the tubulin heterodimers during assembly show that the movement at the lateral interface between heterodimers (wobbling) dominates in the lattice. The simulations of the protofilament curvature agrees well with recently published experimental data, showing curved protofilaments at polymerization of the microtubule plus end. The tubulin heterodimers exposed at the microtubule minus end were less curved and displayed altered interactions at the site of sheet closure around the outmost heterodimers, which may slow heterodimer binding and polymerization, providing a potential explanation for the limited dynamics observed at the minus end.

In the past decade, we developed various fluorescence-based methods for monitoring membrane fusion, membrane docking, distances between membranes, and membrane curvature. These tools were mainly developed using liposomes as model systems, which allows for the dissection of specific interactions mediated by, for example, fusion proteins. Here, we provide an overview of these methods, including two-photon fluorescence cross-correlation spectroscopy and intramembrane Förster energy transfer, with asymmetric labelling of inner and outer membrane leaflets and the calibrated use of transmembrane energy transfer to determine membrane distances below 10 nm. We discuss their application range and their limitations using examples from our work on protein-mediated vesicle docking and fusion.

A method is described to accurately measure the compressibility of liquids using an analytical ultracentrifuge. The method makes use of very large pressure gradients, which can be generated in the analytical ultracentrifuge at high speeds to induce a maximum compression signal. Taking advantage of the new Optima AUC, which offers 10 micron radial resolution, a novel calibration centerpiece for measuring rotor stretch, and a speed-ramping procedure, even the weak compressibility of liquids like water, typically considered to be incompressible, could be detected. A model using the standard expression for the secant-average bulk modulus describing the relative compression of a liquid in the analytical ultracentrifuge is derived. The model is a function of the loading volume and the hydrostatic pressure generated in the analytical ultracentrifuge, as well as the secant-average bulk modulus. The compressibility of water and toluene were measured and the linear secant-average bulk modulus and meniscus positions were fitted. In addition to the measurement of the compressibility of liquids, applications for this method include an improved prediction of boundary conditions for multi-speed analytical ultracentrifugation experiments to better describe highly heterogeneous systems with analytical speed-ramping procedures, and the prediction of radius-dependent density variations.

Cyclodextrins (CDs) are well-known carriers for encapsulating hydrophobic molecules, while among cannabinoids, cannabidiol (CBD) has attracted considerable attention due to its therapeutic capability. In this framework, we employed molecular dynamics and docking techniques for investigating the interaction energy and thermodynamical issues between different CDs (α, β, and γ type) and CBD immersed in water and a solution mimicking a physiological environment. We quantified the energetic aspects, for different thermal conditions, in which both aqueous solutions interact with CBDs and CDs and the CBD-CDs complex itself. In order to approximate the physiological conditions, our simulations also included the mammalian temperature. The calculations revealed significant interaction energy between lactate and the CD surface and a movement of lactate toward CD as well. We observed an almost constant number of lactate molecules forming clusters without exhibiting a temperature dependence. Next, the degree of CBD-CDs complexation at four different temperatures was analyzed. The results showed that the complexation depends on the medium, becoming weaker with the temperature increment. Our findings highlighted that the entropy contribution is relevant for CBD-α-CD and CBD-β-CD, while CBD-γ-CD is practically insensitive to temperature changes for both solutions. In both water and artificial physiological solutions, the γ-CD appears more stable than the other complexes. Overall, CBD achieved partial encapsulation considering α-CD and β-CD, showing a temperature dependence, while γ-CD remained fully immersed no matter the thermal level assumed. We also discuss the pharmacological relevance and physiological implications of these findings.

Analytical ultracentrifugation (AUC) cells use either quartz or sapphire windows as end caps for the cell housing. Current generation sapphire windows are not recommended for absorbance data collection below 235nm, because the window material shows a precipitous drop in transmittance at low wavelengths due to impurities in the sapphire. Quartz windows can be used below 235nm as they do not exhibit adverse transmittance at low wavelengths. In this study, we demonstrate the optical properties of new generation sapphire windows and compare them to those of quartz windows across a wide range of wavelengths and present the results of sedimentation velocity experiments on BSA using both types of windows using data collected at both the 280nm absorbance maxima as well as the 230-240nm (closer to the peptide bond maximum). Our results show that the quartz and new generation sapphire windows deliver identical results in absorbance mode. We also demonstrate that quartz windows suffer significant mechanical deformation while spinning at very high speeds, while sapphire windows do not. This renders Rayleigh interference mode data collected at high speeds using quartz windows much noisier than with sapphire windows-which we have quantified by measuring how the signal to noise ratio of Fourier transformed Rayleigh interference scans degrades at high speed. Thus, we conclude that new-generation sapphire windows can be used for all AUC experiments through almost the entire mid UV range-obviating the need for quartz windows, unless wavelengths below 220nm must be accessed.

A computational methodology to simulate the diffusion of ions from point sources (e.g., ion channels) is described. The outlined approach computes the ion concentration from a cluster of many ion channels at pre-specified locations as a function of time using the theory of propagation integrals. How the channels' open/closed states evolve in time does not need to be known at the start of the simulation, but can be updated on-the-fly as the simulation goes along. The technique uses analytic formulas for the solutions of the diffusion equation for three common geometries: (1) ions diffusing from a membrane (planar symmetry); (2) ions diffusing into a narrow cleft for effective two-dimensional diffusion (cylindrical symmetry); and (3) ions diffusing into open space like the cytosol (spherical symmetry). Because these formulas are exact solutions valid for arbitrarily long timesteps, no spatial or time discretizations are necessary. The only discrete locations are where the ion concentration is computed, and the only discrete timesteps are when the channels' open/closed states are updated. Beyond pure diffusion, the technique is generalized to the Excess Buffer Approximation of ion chelation to give an analytic solution of this approximation of the full reaction/diffusion system. Both the pure diffusion and the diffusion/buffering algorithms scale linearly with the number of channels and the number of ion concentration locations.

The acid–base and redox properties of the menaquinones MK-4, MK-7, and MK-9 (vitamin K2) have been studied in DMPC monolayers on mercury electrodes. The monolayers were prepared by adhesion-spreading of menaquinone-spiked DMPC liposomes on a stationary mercury drop electrode. All three menaquinones possess {text{p}}K_{{text{a}}} constants outside the experimentally accessible range, i.e., they are higher than about 12. The standard potentials of MK-4, MK-7, and MK-9 in the DMPC monolayers are very similar, i.e., 0.351, 0.326, and 0.330 V (corresponding to the biochemical standard potentials − 0.063, − 0.088, and − 0.085 V).Graphic abstract

It is now well appreciated that the crowded intracellular environment significantly modulates an array of physiological processes including protein folding-unfolding, aggregation, and dynamics to name a few. In this work we have studied the dynamics of domain I of the protein human serum albumin (HSA) in its urea-induced denatured states, in the presence of a series of commonly used macromolecular crowding agents. HSA was labeled at Cys-34 (a free cysteine) in domain I with the fluorophore 6-bromoacetyl-2-dimethylaminonaphthalene (BADAN) to act as a solvation probe. In partially denatured states (2-6M urea), lower crowder concentrations (~ < 125g/L) induced faster dynamics, while the dynamics became slower beyond 150g/L of crowders. We propose that this apparent switch in dynamics is an evidence of a crossover from soft (enthalpic) to hard-core (entropic) interactions between the protein and crowder molecules. That soft interactions are also important for the crowders used here was further confirmed by the appreciable shift in the wavelength of the emission maximum of BADAN, in particular for PEG8000 and Ficoll 70 at concentrations where the excluded volume effect is not dominant.