Abstract Fractures that form when fluid pressure ruptures the rock are referred to as fluid-driven fractures or hydrofractures. These include most dykes, inclined sheets and sills, but also many mineral veins and joints, as well as human-made hydraulic fractures. While considerable field and theoretical work has focused on the geometry and arrest of hydrofractures, how they select their propagation paths, particularly in layered and faulted rocks, has received less attention. Here I propose that of all the possible paths that a given hydrofracture may follow, it selects the path of least (minimum) action as determined by Hamilton’s principle. This means that the selected path is that along which the energy transformed (released) multiplied by the time taken for the propagation is a minimum. Hydrofractures advance their tips/fronts in steps, with a time lag between the fracture front and the fluid front. In the present framework, each step is then controlled by Hamilton’s principle. The results suggest that when the hosting rock body is regarded as homogeneous, isotropic and non-fractured, hydrofracture paths are everywhere perpendicular to the trajectories of the minimum compressive (maximum tensile) principal stress σ3 and follow the trajectories of the maximum principal compressive stress σ1. When applied to layered and faulted rock body, the results indicate that hydrofracture paths may follow existing faults for a while, depending primarily on (1) the dip of the fault (steep faults are the most likely to be used by vertically propagating hydrofractures), and (2) the tensile strength across the fault compared with the tensile strength of the host rock along a path following the direction of σ1. The results suggest that hydrofractures may use faults as parts of their paths primarily if the fault is steeply dipping and with close to zero tensile strength.

Abstract Turbidity currents commonly bypass sediment in submarine channels on the continental slope, and deposit sediment lobes farther down-dip on the flat and unconfined abyssal plain. Seafloor and outcrop data have shown that the transition from bypass to deposition usually occurs over complex zones referred to as channel–lobe transition zones (CLTZs). Recognition of these zones in cores and outcrop remains challenging due to a lack of characteristic sedimentary facies and structures. This paper focuses on Unit E of the Permian Fort Brown Formation in the Karoo Basin, South Africa, in the Slagtersfontein outcrop complex, which has previously been interpreted as a CLTZ. This study integrates thin-section micrographs, sedimentary facies, bed-set and stratigraphic architecture, and palaeoflow directions to achieve a multiscale analysis of CLTZ features. A novel process-based facies scheme is developed to evaluate deposits in terms of the depositional or erosional tendencies of the flows that formed them. This scheme allows bypass to be distinguished from depositional zones by the spatial distribution of certain sediment facies. Areas of net sediment bypass were predominantly marked by erosive sediment facies and a larger variability in palaeoflow direction while depositional areas showed a lower variability in palaeoflow directions. Metre-scale structures in the bypass-dominated area reveal seafloor erosion and scour formation. Field relations suggest the presence of a ∼500 m long mega-scour in the CLTZ. The characteristic structures documented here are applicable for identifying CLTZs in sparse datasets such as outcrops with limited palaeogeographical context and sediment cores obtained from subsurface systems.

Abstract Scapolite occurrences are widely observed in the metasedimentary rocks exposed around the Khetri Copper Belt and adjoining Nim ka Thana copper mineralized area in western India. Amoeboidal to well-developed and rounded/elliptical-shaped marialitic scapolite (Na-rich end-member) rich zones with variable Cl contents ranging from 1.0 wt % to 2.9 wt % have been identified in proximity to the ore-bearing hydrothermal fluid activity zones. Although scapolite is formed as a product of regional metamorphism in many places, in this study, we propose a strong possibility that scapolite was formed by hydrothermal ore-bearing fluid interaction with metasediments. The evidence of hydrothermal activity and Cl sourcing is attributed to (i) the absence of evaporite beds in the area and no Na-rich plagioclase as inclusions within the scapolite suggesting the formation of marialitic scapolite from sodic plagioclase in the metasediments with the interacting hydrothermal fluid; (ii) an epithermal to mesothermal hydrothermal fluid with moderate salinity responsible for the Cu mineralization that is ascribed to be the source of Cl for the formation of marialitic scapolite; (iii) diffusion of SO2in the scapolite in close association with the sulfide mineral phase (chalcopyrite) supporting the involvement of ore-bearing fluid in the development of scapolite; (iv) the absence of zoned scapolite, the spatial distribution of scapolite in a particular lithology, the occasional incorporation of sulfur into marialitic scapolite and the texture/geometry in the scapolite suggesting a broad hydrothermal linkage instead of a pure metamorphic origin.

Abstract During late Carboniferous time, the residual ocean basin gradually closed in West Junggar and only a small amount of seawater remained in the Hala’alat Mountain area, where discussions of provenance and tectonics are limited. In this study, LA-ICP-MS U–Pb dating and heavy mineral identification are conducted on the upper Carboniferous tuffaceous sandstones from the Hala’alat and Aladeyikesai formations in the Hala’alat Mountain area. The results reveal the low maturity of the clastic sediments, indicating proximal deposition. The Hala’alat Formation detrital zircons present a single peak (c. 330 Ma). Speculatively, the primary provenance is the Boshchekul–Chingiz Arc, and the secondary sources are the Darbut Tectono-Magmatic Belt and island arcs in the basin. The main peak and provenance of the Aladeyikesai Formation are similar to those of the Hala’alat Formation. Moreover, several age groups, namely, 370–344 Ma, 427–404 Ma and 478–476 Ma, potentially correspond to provenances of the Darbut Tectono-Magmatic Belt, the Boshchekul–Chingiz Arc and the Kujibai–Hongguleleng Ophiolitic Mélange Belt. In addition, the maximum depositional ages of the Hala’alat and Aladeyikesai formations calculated are 314.6 ± 1.54 Ma and 330.8 ± 0.61 Ma, respectively. Comprehensive analysis shows a relatively singular provenance of the Hala’alat Formation. While the provenance of the Aladeyikesai Formation shows inheritance, the provenance area extends northwards to the Kujibai–Hongguleleng Ophiolitic Mélange Belt. Furthermore, the closure of the Junggar Ocean during Carboniferous time caused the potential source region of the Hala’alat Mountain area to migrate northeastwards from Barleik Mountain to Xiemisitai Mountain. This study provides a basis for the analysis of regional geological evolution.

Abstract In volcano-tectonic regions, dyke propagation from shallow magmatic chambers is often controlled by the interaction of the local and regional stress fields. The variations of the stress fields result from a combination of factors including the regional tectonic stress, the geometry of pressurized magma chambers, the layering and the pre-existing discontinuities (e.g. fractures). In this contribution, we describe and apply a new multiparametric inversion technique based on geomechanics that can invert for both the far field stress attributes and the internal pressure of magma chambers or stocks, constrained by observed dyke or eruptive fissure orientations. This technique is based on the superposition principle and uses linear elastic models that can be solved using many types of numerical methods. For practical reasons, we chose a 3D boundary element method (BEM) for a heterogeneous elastic half-space, where magma chambers are modelled as pressurized cavities. To verify this approach, the BEM solution has been validated against the known 3D analytical solution of a pressurized cylindrical cavity. Then the effectiveness of this technique and its practical use is demonstrated through application to natural examples of dyke network development around two different volcanic systems, the Spanish Peaks (USA) and the Galapagos Islands (Ecuador). Results demonstrate that regional stress characteristics as well as the internal pressure of magma chambers can be estimated from observed radial and circumferential dyke patterns and some knowledge of magma chamber geometry.

Abstract Late Palaeozoic igneous rock associations in response to subduction, accretion, and final closure of the eastern Palaeo-Asian Ocean play a significant role in understanding the geodynamic evolution of the southeastern Central Asian Orogenic Belt. Previous studies have identified a Permian arc magmatic belt associated with the southward-dipping subduction of the eastern Palaeo-Asian Ocean along the Solonker–Changchun suture zone. The genetic mechanism and associated geodynamic settings are of great importance in deciphering the evolution of the eastern Palaeo-Asian Ocean. This paper presents zircon U–Pb–Hf isotope and whole-rock geochemical analyses for a suite of magmatic rocks including the early Permian diorite porphyrites (ca. 281.0 Ma), andesites (ca. 276 Ma) and rhyolites (ca. 275 Ma) in the Kulun region. The diorite porphyrites and andesites have high SiO2and total alkali contents, and low MgO contents and Mg no. values, with enrichments in large ion lithophile elements and depletions in high-field-strength elements. These geochemical characteristics, together with low-Sr and high-Yb contents, a weak concave-upward shape of middle rare earth elements and negative Eu anomalies, suggest that these intermediate igneous rocks were generated by partial melting of amphibolitic lower crust at a crustal depth of 30–40 km. The rhyolites have heterogeneous isotopic compositions, withϵHf(t) values andTDM2ages of –20.8 to +0.5 and 3578∼1494 Ma, implying that they were likely derived from partial melting of a mixed source dominated by recycled ancient crust with minor juvenile crustal materials. The rhyolites show potassic affinity with relatively high K2O and very low Na2O, which was attributed to liquid immiscibility of felsic magma and subsequent limited fractional crystallization of plagioclase. The regional igneous associations, metamorphic events, and coeval sedimentary rocks along the Solonker–Changchun suture zone indicate that the early Permian igneous rocks were formed in an active continental arc environment in response to southward subduction of the eastern Palaeo-Asian Ocean.

An abstract is not available for this content so a preview has been provided. As you have access to this content, a full PDF is available via the ‘Save PDF’ action button.

Abstract Interactions of hydrothermal and deformation processes in active fault zones are important in light of seismic and geothermal activities. This study investigates different tectonites of the Grimselpass breccia fault, a hydrothermally active strike-slip structure in the Central Alps (Switzerland). We combine microstructural and geochemical investigations to decipher the interaction of grain-size reduction and associated dilation (volume gain) during frictional deformation with geochemical processes such as mass gain via precipitation, grain growth and healing. Three types of tectonites were investigated in the fault zone: (1) cockade-bearing tectonites, (2) cataclasites and (3) fault gouges. They differ in terms of microstructure of clasts, mass and volume gain/loss, as well as type and degree of cementation. Clast size distributions show decreasing median values from low-strain cataclasites to high-strain cataclasites. Mass/volume gains are up to 20 %, with samples of smallest clast sizes often showing the highest mass gain. In the case of cockade-bearing tectonites large volume and mass gain occur. In particular, the precipitation of SiO2-rich cements is inferred to (i) reduce permeability and (ii) induce a gain in strength of the respective fault rocks. Location, timing and degree of healing directly control the fault architecture by deactivating fault strands from the circulation of hydrothermal fluids. In this case, new rupturing events are necessary to reactivate locked fault strands. Such feedback cycles of episodic deformation, mass/volume and clogging preserved hydrothermal circulation and deformation over the last 3.4 Ma, representing a process chain for the long-term preservation of orogenic hydrothermal systems.

Abstract The sedimentary characteristics and preservation potential of lacustrine carbonates provide fundamental information on climate change. The lacustrine carbonate deposition in the Eocene Dongying Depression was investigated using a combination of mineralogical, petrological and geochemical analyses. Micritic calcite/dolomite, granular calcite, columnar calcite, calcareous shell fragments and reworked detrital calcite were identified. Varying patterns of carbonates (VPC) including lithofacies, geochemical indicators and carbonate distribution were revealed in the Dongying Depression: (i) carbonates hardly precipitate in the nearshore area (average 12 wt %); (ii) carbonate content is high (average 53 wt %) in the shallow lake and (iii) gradually decreases to reach a minimum (average 24 wt %) in the deeper part of the lake. Comparison of VPC in four Holocene lakes (the Qinghai Lake and Barkol Lake in China, Oro Lake in Canada and Montcortès Lake in Spain) with the Dongying Depression suggests that four distinct lake stages were developed, namely the terrigenous clastic/gypsum-rich, carbonate-rich, carbonate-decreasing and carbonate-poor stages. A depositional model of lacustrine carbonates influenced by detrital influx, climate, palaeoproductivity and salinity is developed. This study contributes to the understanding of the genetic mechanisms of lacustrine carbonate deposition to reconstruct environmental changes.

Abstract Radiogenic strontium isotopes (87Sr/86Sr) of vein carbonates play a central role in the tectonometamorphic study of fold-and-thrust belts and accretionary wedges and have been used to document fluid sources and fluxes, for example, along major fault zones. In addition, the 87Sr/86Sr ratios of vein carbonates can trace the diagenetic to metamorphic evolution of pore fluids in accreted sediments. Here we present 87Sr/86Sr ratios of vein carbonates from the Infrahelvetic flysch units of the central European Alps (Glarus Alps, Switzerland), which were accreted to the North Alpine fold-and-thrust belt during the early stages of continental collision. We show that the vein carbonates trace the Sr isotopic evolution of pore fluids from an initial seawater-like signature towards the Sr isotopic composition of the host rock with increasing metamorphic grade. This relationship reflects the progressive equilibration of the pore fluid with the host rock and allows us to constrain the diagenetic to low-grade metamorphic conditions of deformation events, including bedding-parallel shearing, imbricate thrusting, folding, cleavage development, tectonic mélange formation and extension. The strontium isotope systematics of vein carbonates provides new insights into the prograde to early retrograde tectonic evolution of the Alpine fold-and-thrust belt and helps to understand the relative timing of deformation events.