Abstract In the present work measurements of chloride concentrations were used to assess the variability of infiltration conditions and contributions of surface water and local groundwater to the discharge of wells at Krajkowo riverbank filtration site (western Poland). Tests were performed on samples from 26 wells located in a well gallery close to the River Warta. Due to higher chloride concentrations in river water in comparison with local groundwater, significant differences in concentrations in samples from individual wells were noted. In particular, lower chloride concentrations in 11 wells were recorded, which can be linked to the local occurrence of low-permeability deposits in the superficial zone; a locally higher degree of riverbed sediment clogging in the highly convex meandering zone, where strong erosion of the riverbed occurred, which in turn led to increased clogging; the occurrence of a more intensive groundwater inflow into the river valley due to water infiltration from a smaller river entering the River Warta valley, as well as unfavourable conditions for the infiltration of surface water to the lower part of the aquifer with a greater thickness. Differences in chloride concentrations observed were also used to quantify approximately river water contribution to the well production. The average contribution of the River Warta to the recharge of the entire well gallery was estimated at 59.8%.

Abstract Although deltas and subaqueous fans are both formed in the same near-shore zones of basins, the hydraulic conditions for their formation, development and sedimentary records are different. The present review discusses the results of previously published studies of fan deltas (Gilbert-type deltas) and subaqueous fans of lacustrine and glaciolacustrine environments. The depositional mechanisms of deltas and subaqueous fans, textural and structural features of the lithofacies associations and their typical lithofacies are presented. The characteristics of subaqueous fans, which are still relatively poorly understood and are often overlooked in sedimentological interpretations of lacustrine sedimentary successions, receive particular attention. The palaeoenvironmental and lithological differences between deltas and sub-aqueous fans are highlighted.

Sciendo provides publishing services and solutions to academic and professional organizations and individual authors. We publish journals, books, conference proceedings and a variety of other publications.

Abstract In the Polish part of the Carpathian Foredeep, an intensification of gas exploration and exploitation from Miocene strata took place in the middle of the twentieth century. In spite of a good degree of geological and reservoir recognition, the area of the Carpathian Foredeep is still considered to be prospective for the discovery of new gas reservoirs. Here we analyse statistically selected reservoir parameters of Miocene deposits, such as total porosity, effective permeability and reservoir water inflow. These parameters have been determined on the basis of interpretations of results of well logs and reservoir tests with tubular bed samplers (DST, Drill Stem Test). Analytical results in the form of regression and dependence of the logarithm of permeability as a function of porosity show a weak correlation. However, in the study area, the distribution of porosity values for Miocene strata is close to normal.

Sciendo provides publishing services and solutions to academic and professional organizations and individual authors. We publish journals, books, conference proceedings and a variety of other publications.

Abstract During the Rupelian–Chattian, the Qom Basin (northern seaway basin) was located between the Paratethys in the north and the southern Tethyan seaway in the south. The Oligocene deposits (Qom Formation) in the Qom Basin have been interpreted for a reconstruction of environmental conditions during deposition, as well as of the influence of local fault activities and global sea level changes expressed within the basin. We have also investigated connections between the Qom Basin and adjacent basins. Seven microfacies types have been distinguished in the former. These microfacies formed within three major depositional environments, i.e., restricted lagoon, open lagoon and open marine. Strata of the Qom Formation are suggested to have been formed in an open-shelf system. In addition, the deepening and shallowing patterns noted within the microfacies suggest the presence of three third-order sequences in the Bijegan area and two third-order depositional sequences and an incomplete depositional sequence in the Naragh area. Our analysis suggests that, during the Rupelian and Chattian stages, the depositional sequences of the Qom Basin were influenced primarily by local tectonics, while global sea level changes had a greater impact on the southern Tethyan seaway and Paratethys basins. The depositional basins of the Tethyan seaway (southern Tethyan seaway, Paratethys Basin and Qom Basin) were probably related during the Burdigalian to Langhian and early Serravallian.

Abstract Leonard Horner (1785–1864) was a pioneer in the study of loess. His 1836 paper on the geology of Bonn contained detailed descriptions of loess in the Rhine valley. He identified and presented loess as an interesting material for geological study. He investigated loess in the crater of the Rodderberg with Charles Lyell in 1833. He presented the first significant paper on loess in Britain in 1833, but it was not published until 1836. With the assistance of G.A. Goldfuss and J.J. Noegerath he conducted early studies of the Siebengebirge and published the first geological map of the region, and the first picture of loess, at Rhondorf by the Drachenfels. He became the eleventh person to be included in the list of loess scholars which Charles Lyell published in volume 3 of the Principles of Geology. These were Leonhard, Bronn, Boue, Voltz, Steininger, Merian, Rozet, Hibbert in 1833, Noeggerath, von Meyer in 1835, Horner in 1837. Horner arrived after the publication of his studies on the loess at Bonn in 1836.

Abstract The Kushk-e-Bahram Manto-type Cu deposit is located in central Iran, within Eocene to Oligo–Miocene volcanic strata which occur in the central part of the Uremia-Dokhtar Magmatic Arc (UDMA). Propylitization, silicification, argillization and carbonatization are the main types of alteration to have affected the pyroclastic and volcanic rocks. There are high amounts of oxide minerals, including malachite, azurite, hematite, magnetite and goethite. Three types of primary FIs have been determined in the Kushk-e-Bahram deposit, namely; I: two-phase liquid-rich FIs (L+V), II: mono-phase liquid FIs, III: two-phase vapour-rich FIs which have been identified based on petrographical studies. Based on FI studies of co-existing quartz and calcite, homogenization temperatures (Th) must have been between 67 and 228°C, with an average of 158°C. Moreover, salinity is between 14.0–30.3 wt% NaCl, equivalent to a 19.6% average. Fluid density values vary from 0.8 to 1.1 gr/cm3. Based on FI data and related diagrams, the depth of their trapping was estimated to be <200 m and ore formation occurred at pressures of <50 bars. Consequently, mineralogy, host rock and FIs characteristics in the Kushk-e-Bahram deposit are similar to the Manto-type Cu deposits in Mesozoic-Cenozoic volcanic belts of Iran and South America.

Abstract The present study aims to investigate the diversity index (dv-index) of morphotectonic and geomorphological land-forms as one of the scientific value indices for evaluation of the geotouristic potential of the southeastern Lut desert using topographic statistical analysis. Scientific index scoring in most models is based on descriptive assessment by geotourists and experts. Statistical analysis of the dv-index in the present study helps experts to base their scoring on scientific methods. The dv-index is controlled by several items. In the present study, we analyse two of these, including the classification of topographic continuity pattern (TCP) and topographic slope position correlation (TSPC). For this purpose, a network of section lines is used to analyse slope continuity. The TSPC analysis is performed by using two parameters of absolute value and slope position. Results for these two evaluated items indicate a score of 1.46 (out of 2) for the dv-index. Given a rating of 5, the score obtained for the two items is a high one. Therefore, an initial estimate of the dv-index indicates a significant scientific value of the study area.

Abstract The present article focuses predominantly on sandy deposits that occur within the Middle Miocene lignite seam at the Tomisławice opencast mine, owned by the Konin Lignite Mine. As a result of mining activity, these siliciclastics were available for direct observation in 2015–2016. They are situated between two lignite benches over a distance of ~500 m in the lower part and ~200 m in the higher part of the exploitation levels. The maximum thickness of these sandy sediments, of a lenticular structure in a S–N cross section, is up to 1.8 m. With the exception of a thin lignite intercalation, these siliciclastics comprise mainly by fine-grained and well-sorted sands, and only their basal and top layers are enriched with silt particles and organic matter. Based on a detailed analysis of the sediments studied (i.e., their architecture and textural-structural features), I present a discussion of their genesis and then propose a model of their formation. These siliciclastics most likely formed during at least two flood events in the overbank area of a Middle Miocene meandering or anastomosing river. Following breaching of the natural river levee, the sandy particles (derived mainly from the main river channel and levees) were deposited on the mire (backswamp) surface in the form of crevasse splays. After each flooding event, vegetation developed on the top of these siliciclastics; hence, two crevasse-splay bodies (here referred to as the older and younger) came into existence. As a result, the first Mid-Polish lignite seam at the Tomisławice opencast mine is currently divided in two by relatively thick siliciclastics, which prevents a significant portion of this seam from being used for industrial purposes.