Production of young plants from cuttings and seed relies heavily on peat and frequent, but light, irrigation. Interest in reducing peat usage as well as a propensity for short container heights to inhibit drainage have led to the exploration of alternative techniques to improve substrate airspace in young plant production. Substrate stratification has been shown to be effective for reducing excessive moisture content and improving root growth in the lower strata of larger containers. This research evaluated the effects of substrate stratification in 5.1-cm tall, 37-cm 3 cell plug trays using two plant propagation substrates: a bark-based vegetative cutting substrate (16% peat) and a peat-based seed germination substrate (65% peat). Each substrate was stratified by layering over either a commercially available wood fiber or horticultural grade perlite and was compared with an unstratified control. Substrate physical properties were measured on unplanted substrate treatments. Cuttings of two common bedding plants [coleus ( Solenostemon scutellarioides ‘Salsa Verde’) and evolvulus ( Evolvulus glomeratus ‘Blue Daze’)] were grown in the vegetative bark-based substrate treatments, and seeds of three common seed-started taxa [basil ( Ocimum basilicum ‘Thai Towers’), hibiscus ( Hibiscus moscheutos ‘Luna Pink Swirl’), and zinnia ( Zinnia elegans ‘Zesty Purple’)] were grown in the seed peat-based substrate treatments. Finished plants were assessed for plug integrity and various growth parameters. Stratification with perlite increased airspace in the vegetative substrate only, not in the seed substrate. Stratification with wood fiber resulted in reduced airspace and increased container capacity in both substrate types. Stratification with perlite decreased plug integrity compared with nonstratified treatments, whereas wood fiber stratification resulted in similar or improved plug integrity, even in treatments in which root growth was reduced. Dry root biomass was greatest in both nonstratified substrates, with perlite stratification generally associated with the lowest root biomass. Perlite stratification was also associated with the lowest total root length and total root surface area, whereas wood fiber stratification resulted in values equivalent or greater than nonstratified treatments. Despite decreases associated with perlite stratification, however, both perlite- and wood fiber–stratified treatments produced quality plugs that established successfully post-transplant. The results demonstrate that using stratification in young plant production may provide growers with an opportunity to reduce peat consumption in propagation operations.

The future of agricultural water availability is threatened by climate change, population growth, and environmental regulations. Most of the global water is being used for crop irrigation. The objective of this research was to determine optimum timer-based controller settings and controlled-released fertilizer rates for ‘American Red’ ( Pelargoium ×hortorum ) potted geranium plants. Fertilizer was top-dressed at 3, 6, or 9 g. Plants were irrigated by a timer-based controller set to water at 11:00 AM every other day for 2 minutes, 9:00 AM and 2:00 PM for 1 minute per day, 11:00 AM for 1 minute per day, 11:00 AM for 2 minutes per day, and a control of manual hand watering. Data regarding plant growth, soil and leaf nutrients, and water use were collected. For geranium growth factors, the total flowers per plant was greatest for irrigation at 11:00 AM for 1 minute with 6 g fertilizer. Plant height and shoot dry weight were greatest for 6 and 9 g fertilizer. The number of umbels and soil plant analysis development (SPAD) chlorophyll meter readings were greatest for 9 g fertilizer. For geranium soil nutrient content, the pH was greatest for 3 g fertilizer, whereas the electrical conductivity, potassium, nitrate, sulfate, and boron were greatest for 6 and 9 g fertilizer. Regarding the nutrient content of the leaves, total nitrogen, boron, iron, and copper were greatest for 9 g fertilizer. Water use efficiency was greatest with 6 and 9 g fertilizer and irrigation 1 minute per day at 11:00 AM. The findings indicated that using timer-based controlled irrigation systems programmed to water for 1 minute during the morning with 6 g fertilizer resulted in plants that not only reduced water consumption but also enhanced water use efficiency and overall plant quality.

In North Dakota, USA, harsh winter conditions cause considerable winter injury to many floricane fruiting raspberries. Short growing seasons in North Dakota inevitably result in an incomplete fruit harvest of primocane fruiting raspberries. In this study, the winter hardiness of six floricane fruiting raspberry and five primocane fruiting raspberry cultivars had been evaluated for multiple years since 2016. Results showed that five floricane cultivars (Prelude, Boyne, Killarney, Nova, and Encore) showed less than 20% buds damaged, whereas cultivar Amethyst had 20% to 50% buds damaged in the winter. Severe bud damage was observed in five primocane fruiting cultivars (Polana, Autumn Bliss, BP-1, Heritage, and Joan J) in which Polana had the least winter bud damage with significant variations among years, followed by Heritage, Joan J, and Autumn Bliss, and BP-1. No winter damage was observed of the root system. In addition, the fruit quality, cane height, and yield of the six floricane fruiting cultivars were evaluated. Results showed that ‘Killarney’ fruit was the largest (2.50 g per berry) followed by ‘Nova’ (2.35), ‘Encore’ (2.24), ‘Amethyst’ (2.12), ‘Prelude’ (1.94), and ‘Boyne’ (1.84). No significant differences in total soluble solid (TSS) among cultivars were observed except that the TSS of Prelude was significantly lower than the other five cultivars. The cane height of ‘Killarney’ was the shortest (75 cm), whereas ‘Amethyst’ grew the longest canes (129 cm). Prelude is the earliest ripening floricane cultivar (late June) with a short harvest duration (20 to 25 days). The fruit harvest of ‘Killarney’, ‘Boyne’, and ‘Nova’ started 3 to 5 days after ‘Prelude’ with a longer harvest duration (25 to 30 days). ‘Encore’ and ‘Amethyst’ were harvested from mid-late July to early-mid August. Yield estimation indicated that ‘Killarney’ and ‘Nova’ produced more berries than other cultivars.

The purpose of this study was to improve the protocol of clonal micropropagation for effective mass production of the Zarya Alatau apple cultivar through the use of axillary buds. In Kazakhstan’s challenging climate, the Zarya Alatau apple thrives because of its unique traits, including fruit preservation until May, cold hardiness, and resistance to scab and powdery mildew. Micropropagation is essential for healthy mother tree establishment, and this research focused on key factors for successful in vitro propagation. The sterilization of explants was optimized: 1.6% solution of sodium hypochlorite effectively sterilized plant materials for 10 minutes. Nutrient media composition was evaluated for efficient shoot regeneration. The study examined axillary bud regeneration on Murashige and Skoog medium with different concentrations of hormones. A combination of 6-benzylaminopurine (0.5 mg/L) and gibberellic acid (0.5 mg/L) yielded optimal results, with shoots reaching 3.5 cm. Root induction was analyzed with varying indole-3-acetic acid (IAA) concentrations, and the best results were achieved with 1.5 mg/L IAA, resulting in an 85% rooting frequency. Adapting in vitro plants to ex vitro conditions is crucial given their sensitivity to environmental changes. Well-developed leaves and a robust root system are essential for successful acclimatization during transplantation into a soil substrate. This research provides valuable insights into the critical parameters for a successful transition of in vitro propagated plants to soil conditions, optimizing micropropagation practices.

Day-neutral strawberry (DNS) production is increasing in the Upper Midwest because of its extended harvest season and greater yield over June-bearing cultivars. However, the longer season increases fruit exposure to the invasive spotted-wing drosophila ( Drosophila suzukii ; SWD), which threatens the production of small fruits and berries, particularly in organic systems. Numerous pest management tactics have been developed for SWD in recent years; however, relatively few studies have investigated the impact of SWD on DNS. Organic DNS growers need information regarding which management strategy is most effective when compared directly. To address this knowledge gap, we established a 2-year controlled field experiment with organic DNS. We applied treatments that correspond with techniques that local growers reported using or that have shown promise for organic raspberries, including increased harvest frequency, botanical-based repellents, and weekly rotations of organic insecticides, which we compared with an untreated control. We hypothesized that noninsecticidal SWD management strategies would result in fewer SWD eggs per berry and a lower proportion of infested berries compared with those associated with an untreated control. We also hypothesized that noninsecticidal management strategies would be as effective and cost less than organic insecticide applications. We collected data regarding labor hours, direct costs, strawberry yield, and SWD infestation in experimental plots on certified organic land in Minnesota in 2022 and 2023. An average of 33% of strawberries contained SWD eggs. The experimental treatments showed inconsistent effectiveness for reducing infestation compared with that of the untreated control plots and had no effect on marketable plant yield over the 2-year period. Thus, the added labor expense of these pest control treatments yielded net returns that were 17% to 21% below the control. Labor-saving alternatives like exclusion netting or postharvest cold treatments, which reduce fruit pest exposure and egg viability without harming nontarget insects, may offer more cost-effective solutions for managing SWD in organic DNS.

‘Coy’ alder-leaf mountain mahogany ( Cercocarpus montanus ) is a new cultivar developed from a species native to the western United States with potential for use in xeriscaping, rock gardens, and water-efficient landscaping. However, efficient propagation methods are not well developed for it. In this study, cutting propagation of ‘Coy’ alder-leaf mountain mahogany was investigated over 3 years to evaluate the effects of wounding method, rooting hormone, type of cuttings collected, and time for cutting collection on rooting. In May, Jul, and Sep 2020, 2021, and 2022, nondormant hardwood subterminal cuttings and/or semihardwood terminal cuttings were collected for wounding studies. Before the treatment with 3000 mg·L −1 indole-3-butyric acid (IBA) in powder, cuttings were wounded either by scraping one side (scrape) or by perpendicular cuts around the base (cut), and cuttings without additional wounding were used as the control. Similarly, subterminal and terminal cuttings of ‘Coy’ alder-leaf mountain mahogany were collected during the same time and were used for hormone treatments. Cuttings were treated with 1000 or 3000 mg·L −1 IBA in powder or 1000/500 or 3000/1500 mg·L −1 IBA/NAA (1-naphthaleneacetic acid) in solution. Wounding by cut or scrape increased the rooting percentage. In addition, most cuttings wounded by the scrape method had better rooting than those wounded with cuts. On the basis of hierarchical cluster analyses, cuttings treated with 3000 mg·L −1 IBA in powder had greater rooting than those treated with other hormones. Therefore, our research showed that successful rooting of subterminal or terminal stem cuttings of ‘Coy’ alder-leaf mountain mahogany can be achieved through wounding using scrape method and by treatment with 3000 mg·L −1 IBA in powder.

The nursery industry produces and sells plants for landscape and environmental purposes and represents a major sector within the US agricultural industry. In recent years, the nursery industry has undergone rapid growth as a result of various factors, including increased demand from housing development and pandemic-fueled interest in home horticulture. As with any industry, the nursery industry must adapt to changes in societal trends to sustain growth. In the wake of unprecedented societal and supply chain issues stemming from the global coronavirus disease 2019 pandemic, the American Society for Horticultural Science Nursery Crops Professional Interest Group gathered experts in various disciplines to provide their opinions and insights into the future of the nursery industry, focusing specifically on the changes and challenges the nursery industry will face in the coming decade. Nursery crop specialists spanning the United States identified three primary areas that will steer the future momentum of the nursery industry: consumer trends, natural resources, and labor. Six experts were selected to represent these areas in a workshop held Jul 2022 at the American Society for Horticultural Science Annual Conference in Chicago, IL, USA. This article was developed to disseminate to the greater scientific community the discussions held and insight shared during that workshop.

The production of Beit Alpha cucumber ( Cucumis sativus ) in hydroponic systems has increased in popularity since the early 2000s, along with the use of high-wire trellising systems. Some farmers claim the high-wire trellising systems, also known as drop-and-lean trellising, result in a more consistent weekly yield than umbrella or modified-umbrella systems. This study compared the high-wire and modified-umbrella trellising systems both using a 7 ft top wire and 4 plants/m 2 plant density. The fruit weight and number of fruit per plant were significantly greater using the modified-umbrella trellising system, with the number of fruit being about twice as high as the high-wire trellising system. Consistency of yields was also measured for both systems and found to peak at ∼5 to 7 weeks after the start of harvest using both trellising systems. However, peak yields using the modified-umbrella trellising system followed a quadratic curve, implying that the high-wire trellising system results in more consistent yields. Differences in yield and harvest consistency were likely related to light penetration of the plant canopy. Growers using low-profile greenhouses can expect lower yields and more consistent harvests using the high-wire trellising system. Yields may be improved using a higher plant density. Alternatively, succession planting on a 5- to 7-week interval can improve harvest consistency using a modified-umbrella trellising system.

Previous studies have demonstrated the beneficial impact of plants on the overall well-being of elderly individuals. However, there remains a gap in our understanding which specific plant species have a notable influence on the physical and mental health of the elderly population. Among the various woody ornamental plants used worldwide, crape myrtle ( Lagerstroemia indica ) holds a growing significance in the natural environment. This study aimed to investigate the physiological parameters (such as blood pressure, heart rate, blood oxygen saturation, and fingertip pulse) as well as psychological aspects (measured using positive and negative affect schedule scores and smile face scale) associated with crape myrtle observation activities. The finding revealed the following key points: 1) engaging in crape myrtle observation activities significantly enhanced the physical and mental well-being of elderly participants; 2) the impact of observing crape myrtle flowers differed notably from that of observing its leaves, with flower observation having a more positive effect on the physical and mental health of elderly individuals; and 3) the natural environment was found to exert an influence on the physical and mental health of elderly individuals through visual stimulation. Following the observation of crape myrtle, there was a significant decrease in the physiological indices of elderly individuals. Our findings offer valuable insights into the therapeutic benefits of crape myrtle observation activities and contributing evidence-based recommendations for future landscape design aimed at enhancing well-being.

We grew eight cultivars of eggplant ( Solanum melongena ) over 2 years in four experiments conducted in high tunnels located in Durham, NH; North Haverhill, NH; and Ossipee, NH, USA. The marketable yields of eggplant harvested over 14 to 15 weeks ranged from 925 to 3269 g per plant (2.5–8.8 kg⋅m –2 ), depending on year and cultivar. Significant differences in marketable yield among cultivars were observed in three of the four experiments, but trends were not consistent. Parthenocarpic cultivars developed for greenhouse production, including Angela, Annina, Aretussa, Jaylo, and Michal, did not produce significantly greater yields than the cultivars developed for field production (Nadia, Traviata, and White Star). In two experiments, using a subset of cultivars, we explored the effects of training plants to four leaders compared with the standard practice of no pruning. Pruning treatment did not impact significantly the number or weight of marketable fruit, or the percentage of cull fruit, and there was no cultivar-by-pruning treatment interaction. In three separate experiments in Durham NH, USA, weight loss, browning, and softness were evaluated after 2 weeks of storage in one of three conditions: within the ideal range of temperatures (average of 50–64 °F), too warm (63–73 °F), and too cool (38–49 °F). Overall, responses to conditions that were warmer or cooler than ideal were as predicted, and weight loss, softness, and browning were all minimized when fruit were stored at 50 or 60 °F. We did, however, see some differences among cultivars in susceptibility to common postharvest storage problems. In conclusion, we found that cultivar choice can be important for high-tunnel eggplant producers, especially if postharvest storage conditions are not ideal. We also found that pruning and parthenocarpy did not enhance marketable yields, allowing growers to reduce labor and seed costs without impacting yield or fruit quality negatively.