In the present study, the combined effects of cow dung (CD) and zinc (Zn) fertilizers on tomato growth and yield was studied. Seven (7) treatments as T0=CD0Zn0 (Control), T1=CD5Zn0, T2=CD0Zn1, T3=CD0Zn1.5, T4=CD5Zn2, T5=CD5Zn2.5, T6=CD5Zn3 were used in a RCBD with three replications using two factors like cow dung (0 and 5 t ha-1) and zinc fertilizers (0, 1, 1.5, 2.0, 2.5, and 3.0 kg ha-1).The use of CD and Zn fertilizers had a substantial impact on all of the assessed growth, yield contributing attributes, and yield. The result revealed that the highest yield and yield contributing characters such as plant height (51.33, 73.00 and 105.00 cm at 35, 50 and 65 DAT, respectively), number of leaves plant-1 (17.00, 19.33 and 24.00 at 35, 50 and 65 DAT, respectively), number of branches plant-1 (11.00, 12.00 and 14.00 at 35, 50 and 65 DAT, respectively), maximum number of flower clusters plant-1 (7.00 and 15.60 at 50 and 65 DAT, respectively), number of fruits plant-1 (8.00 and 46.09 at 50 and 65 DAT, respectively), the highest individual fruit weight (73.00 g), weight of fruit plant-1 (4.83 kg), fruit length (7.50 cm), fruit diameter (4.17 cm) and yield (55.00 t ha-1) were produced at T6 (5 t CD ha-1 and 3 kg Zn ha-1) but lowest in T0 (control) in all parameters. The results of the study suggest that combining CD and Zn fertilizers is an excellent source of tomato fertilization, with T6 treatment (5 t CD ha-1 and 3 kg Zn ha-1) being found to be the most suitable due to the use of fewer treatment factors than recommended doses for obtaining economically viable yield.

Sukkary date palms (Phoenix dactylifera L.) were treated with three levels of potassium fertilizer combined with three irrigation intervals regime, five replicates were allocated per treatment, to enhance better date peel color; decrease loose crust, and subsequently, improve high market ability. Potassium sulfate (49% K2O) was applied annually at a rate of 490 g (as common fertilization applied in the farm in which this experiment was carried out, therefore, it was considered as a control treatment), 735 g, or 980 g K2O per palm tree, each level was divided into three equal doses. The first dose was added one month after pollination; the other two doses were added at two month interval, whereas the irrigation treatments were as follows: 24 hrs (as common irrigation application in the farm used for this study, and it was considered as a control treatment), 48 hrs, or 72 hrs. The results showed a great decrease in the loose crust dates at harvesting time. An inverse proportional relationship between irrigation intervals and loose crust of dates was observed. The High potassium fertilizer treatment accompanied with 72 hrs irrigation interval treatment produced a significantly higher date quality regarding with bright yellow color, less darkening, and loose crust. High potassium fertilizer treatments (735, or 980 g K2O per palm) increased total yield, improved date weight, size, and color. Moreover, increasing potassium level affected significantly the date total antioxidant. This study showed that, a potential means to control peel darkening and loose date crust and improve quality of cv. Sukkary dates, which ultimately improves its market ability, through implementing appropriate potassium and irrigation regimes.

The productivity of the phenylpropanoid biosynthesis pathway in plants varies depending on the type of stress. In this work, we looked into how different phenylpropanoid chemicals accumulated in Euonymus alatus following exposure to different concentrations of CuCl2 (0.1, 0.5, and 1 mM), HgCl2 (0.1, 0.5, and 1 mM), and NiSO4 (10, 50, and 100 mM). We analyzed some of the individual phenolic chemicals by high-performance liquid chromatography (HPLC). In nearly all cases, rutin showed the largest concentration among the phenylpropanoid chemicals, followed by epicatechin, sinapic acid, p-coumaric acid, trans-cinnamic acid, ferulic acid, and caffeic acid. However, due to the change in the concentration of the heavy metals, the amount of phenylpropanoid changed. The highest accumulation of phenylpropanoid was documented in 0.1 mM CuCl2, whereas it was reduced in 1 mM HgCl2 exposed plants. These findings unequivocally demonstrate that the phenylpropanoid metabolic pathway took part in the heavy metal tolerance process, which shielded E. alatus from the oxidative damage brought on by heavy metals. Thus, under a variety of environmental stress situations, this species with a high tolerance to heavy metals may survive.

Conservation Agriculture (CA) systems have gained significant attention as a sustainable cropping approach that not only improves crop yields but also contributes to climate change adaptation and mitigation through enhanced soil organic carbon (SOC) sequestration. However, a comprehensive understanding of the influence of soil texture and climate conditions on SOC sequestration under CA remains limited. To address this knowledge gap, we conducted a systematic review using the PRISMA method, analyzing data from 35 peer-reviewed articles encompassing 71 field experiments and 451 observations worldwide. Our findings demonstrate the substantial positive impact of CA on SOC sequestration, with an overall increase of approximately 78%. Remarkably, only a mere 2% of observations reported neutral effects, while 20% indicated adverse outcomes. Notably, SOC sequestration rates were highest in tropical regions experiencing dry winters, reaching an impressive 2.50 Mg/ha/year in the topsoil layers. Moreover, fine and moderate textured soils, such as clay, clay loam, loam, and clay sandy, exhibited higher SOC sequestration rates (20-27%) compared to coarse-textured soils dominated by sandy proportions (9%). These findings emphasize the significance of climate conditions and soil texture in shaping the impact of CA on SOC sequestration.

Among the undesirable effects of soil compaction is a measurable reduction in plant growth and crop yield. The prevailing belief is that compacted tillage pans are caused by repetitive farming practices, heavy tractors, tillage tools, and field traffic. This experiment was conducted to determine and map the hardpan layers across an agricultural field through advanced technologies of precision agriculture. These valuable techniques such as data logger, yield map, and data analysis of performance indicators were linked with accurate global positioning systems (GPS) datasets. These important technologies provided the farmers and helped them to identify and manage areas of the fields with higher compacted layers. Three ground speeds 4.3, 5.2, and 6.4 km h-1 were performed with two tillage depths 25 and 40 cm of a chisel plow. The effects of these two factors were studied to determine slippage percentage, field productivity, traction power, and fuel consumption. For the first shallow 25 cm depth, the results showed that increasing the speed from 4.3 to 5.2 and then to 6.4 km h-1 led to a significant increase in slippage percentage from 7.22 to 10.35 and then to 12.63%, respectively. Increasing the speed increases field productivity from 0.547 to 0.663 then to 0. 749 ha hour-1, and tractive power increases from 9.44 to 11.74, then to 13.24 hp. As a result, there was a significant increase in the fuel consumption rate from 18.44 to 20.15, then to 22.27 L hour-1, respectively. Changing the depth from 25 to 40 cm and increasing the practical speed from 4.3 to 5.2 and then to 6.4 km h-1 led to a significant increase in slippage percentage from 10.14 to 12.77 and then to 15.27%, and a significant increase in field productivity from 0.446 to 0.568 and then to 0.640 ha hour-1, respectively. This led to a significant increase in traction power from 12.72 to 13.36, then to 15.87 hp. Increasing the speed also brought a significant increase in fuel rate from 22.14 to 23.54 and then to 26.14 L ha-1, respectively. Based on this study, it was concluded that the use of this powerful approach was a useful methodology to reflect, determine, specify, and manage the regions of induced and hardpan zones by means of dataset analyses provided by the GPS for the desired field.

An experiment was conducted at the Agronomy Field Laboratory, Bangladesh Agricultural University, Mymensingh from July to November 2015 to find out the effect of planting and nutrient management on the growth, yield and protein content of aromatic fine rice (cv. Binadhan-13). The experimental treatments comprised six planting arrangement viz. 25 cm × 20 cm, 25 cm × 15 cm, 25 cm × 10 cm, 20 cm × 20 cm, 20 cm × 15 cm, 20 cm × 10 cm and four nutrient management viz. recommended dose of inorganic fertilizer (RDF) N-P2O5-K2O-S-Zn at the rate of 75-42-75-17-2 kg ha-1 respectively; Cow dung @ 10 t ha-1, 25% less than RDF + Cow dung @ 5 t ha-1, 50% less than RDF + Cow dung @ 5 t ha-1. The experiment was laid out in a randomized complete block design (RCBD) with three replications. Different crop characters, yield contributing characters, yield and grain quality were significantly influenced by planting arrangement and nutrient management. In the crop growth stage, the maximum number of tillers hill-1 (19.03) was recorded from the 25 cm × 15 cm spacing fertilized with 25% less than RDF + cow dung @ 5 t ha-1 and the highest total dry matter production (62.70), crop growth rate (19.37) and chlorophyll content (35.77) of leaf were recorded from the 20 cm × 15 cm spacing fertilized with 25% less than RDF + cow dung @ 5 t ha-1. At harvest, the highest grain yield (3.66 t ha-1) and protein content (9.63%) were recorded from the 20 cm × 15 cm spacing fertilized with 25% less than RDF + cow dung @ 5 t ha-1. So, transplantation at 20 cm × 15 cm spacing and fertilization with 25% less than the recommended dose of inorganic fertilizer + cow dung @ 5 t ha-1 was found to be promising practice for the cultivation of aromatic fine rice (cv. Binadhan-13).

Wheat stem sawfly (Hymenoptera: Cephidae) is a significant pest on wheat and barley in Syria, and host plant resistance is one of the most effective mitigation of wasps damage. The preference for laying eggs among females of wheat stem sawfly (WSS) was studied in some cultivation barley varieties in Syria, and the reasons for this preference, by comparing the characteristics of plant height in the stages of early wasp propagation, phenological development stages synchronized with late propagation wasps stages that are known having attraction influence for female wasps to put eggs, within the natural conditions at the place of experimenting in Soran region, northern of Hama, about 20 km. The results showed a great variation in the infection rates between the tested barley cultivar varieties. Female of wheat stem sawfly (WSS) preferred to lay eggs in the barley cultivar (Arabi Aswad) (Aswad means black), which was a sensitive variety for infection althoughit is not being the highest height plant in the early stages or the less developed in the late stages of wheat stem sawfly spread, whereas the rest of the tested varieties distinguished (Furat 1, Furat 3, Furat 4, Furat 5, Furat 6, Furat 9, Arabi Abiad, and Arabi Abiad Mohsan) (Abiad means white, Mohsan means improved) by its relative resistance to the injury. Our results suggest conducting other studies to reach the reasons forpredilection preference or lack of preference and benefit from them later for reducing losses resulting from this injury.