In this paper, a fault detection and diagnosis (FDD) scheme is developed for a class of intensified HEX/reactor, in which faults caused by sensor, actuator, and process are taken into account in the unified framework. By considering overall heat transfer coefficient as a function of fouling and fluid flow rate, a dynamic model which is capable of identifying these two faults simultaneously is derived. Sensor measurements, together with estimation by adaptive high gain observers, are processed, aimed at identifying sensor faults and providing adequate estimation to substitute faulty measurements. Then reliable measurements are fed to several banks of interval filters to generate several banks of residuals; each bank of residuals is sensitive to a particular process parameter/actuator. By evaluating these residuals, process/actuator fault isolation and identification are achieved. The proposed strategy is applied to actual data retrieved from a new intensified heat exchanger reactor. Simulation results confirm the applicability and robustness of the proposed methodology.

This was

Each pixel in the hyperspectral unmixing process is modeled as a linear combination of endmembers, which can be expressed in the form of linear combinations of a number of pure spectral signatures that are known in advance. However, the limitation of Gaussian random variables on its computational complexity or sparsity affects the efficiency and accuracy. This paper proposes a novel approach for the optimization of measurement matrix in compressive sensing (CS) theory for hyperspectral unmixing. Firstly, a new Toeplitz-structured chaotic measurement matrix (TSCMM) is formed by pseudo-random chaotic elements, which can be implemented by a simple hardware; secondly, rank revealing QR factorization with eigenvalue decomposition is presented to speed up the measurement time; finally, orthogonal gradient descent method for measurement matrix optimization is used to achieve optimal incoherence. Experimental results demonstrate that the proposed approach can lead to better CS reconstruction performance with low extra computational cost in hyperspectral unmixing.

Future aircraft will make more and more use of automated electric power system management onboard. Different solutions are currently being explored, and in particular the use of a supercapacitor as an intelligent energy storage device is addressed in this paper. The main task of the supercapacitor is to protect the electric generator from abrupt power changes resulting from sudden insertion or disconnection of loads or from loads with regenerative power capabilities, like electromagnetic actuators. A controller based on high-gain concepts is designed to drive a DC/DC converter connecting the supercapacitor to the main electric bus. Formal stability proofs are given for the resulting nonlinear system, and strong robustness results from the use of high-gain and variable structure control implementation. Moreover, detailed simulations including switching devices and electrical parasitic elements are provided for different working scenarios, showing the effectiveness of the proposed solution.

To isolate the problem source degrading the control loop performance, this work focuses on how to incorporate background knowledge into Bayesian inference. In an effort to reduce dependence on the amount of historical data available, we consider a general kind of background knowledge which appears in many applications. The knowledge, known as response information, is about what faults can possibly affect each of the monitors. We show how this knowledge can be translated to constraints on the underlying probability distributions and introduced in the Bayesian diagnosis. In this way, the dimensionality of the observation space is reduced and thus the diagnosis can be more reliable. Furthermore, for the judgments to be consistent, the set of posterior probabilities of each possible abnormality that are computed from different observation subspaces is synthesized to obtain the partially ordered posteriors. The eigenvalue formulation is used on the pairwise comparison matrix. The proposed approach is applied to a diagnosis problem on an oil sand solids handling system, where it is shown how the combination of background knowledge and data enhances the control performance diagnosis even when the abnormality data are sparse in the historical database.

This paper proposes a model predictive control of open irrigation canals with constraints. The Saint-Venant equations are widely used in hydraulics to model an open canal. As a set of hyperbolic partial differential equations, they are not solved explicitly and difficult to design optimal control algorithms. In this work, a prediction model of an open canal is developed by discretizing the Saint-Venant equations in both space and time. Based on the prediction model, a constrained model predictive control was firstly investigated for the case of one single-pool canal and then generalized to the case of a cascaded canal with multipools. The hydraulic software SICC was used to simulate the canal and test the algorithms with application to a real-world irrigation canal of Yehe irrigation area located in Hebei province.

Focusing on quality-related complex industrial process performance monitoring, a novel multimode process monitoring method is proposed in this paper. Firstly, principal component space clustering is implemented under the guidance of quality variables. Through extraction of model tags, clustering information of original training data can be acquired. Secondly, according to multimode characteristics of process data, the monitoring model integrated Gaussian mixture model with total projection to latent structures is effective after building the covariance description form. The multimode total projection to latent structures (MTPLS) model is the foundation of problem solving about quality-related monitoring for multimode processes. Then, a comprehensive statistics index is defined which is based on the posterior probability of the monitored samples belonging to each Gaussian component in the Bayesian theory. After that, a combined index is constructed for process monitoring. Finally, motivated by the application of traditional contribution plot in fault diagnosis, a gradient contribution rate is applied for analyzing the variation of variable contribution rate along samples. Our method can ensure the implementation of online fault monitoring and diagnosis for multimode processes. Performances of the whole proposed scheme are verified in a real industrial, hot strip mill process (HSMP) compared with some existing methods.

An iterative learning control algorithm with an adjustable interval is proposed for nonlinear systems to accelerate the convergence rate of iterative learning control. Forλ-norm, the monotonic convergence of ILC was analyzed, and the corresponding convergence conditions were obtained. The results showed that the convergence rate was mainly determined by the controlled object, the control law gain, the correction factor, and the iteration interval size and that the control law gain was corrected in real time in the modified interval and the modified interval shortened as the number of iterations increased, further accelerating the convergence. The numerical simulation shows the effectiveness of the proposed method.

Due to the problem of load varying or environment changing, machinery equipment often operates in multimode. The data feature involved in the observation often varies with mode changing. Mode partition is a fundamental step before fault classification. This paper proposes a multimode classification method based on deep learning by constructing a hierarchical DNN model with the first hierarchy specially devised for the purpose of mode partition. In the second hierarchy , different DNN classification models are constructed for each mode to get more accurate fault classification result. For the purpose of providing helpful information for predictive maintenance, an additional DNN is constructed in the third hierarchy to further classify a certain fault in a given mode into several classes with different fault severity. The application to multimode fault classification of rolling bearing fault shows the effectiveness of the proposed method.

Effective fault diagnosis and reasonable life expectancy are of great significance and practical engineering value for the safety, reliability, and maintenance cost of equipment and working environment. At present, the life prediction methods of the equipment are equipment life prediction based on condition monitoring, combined forecasting model, and driven data. Most of them need to be based on a large amount of data to achieve the problem. For this issue, we propose learning from the mechanism of cell division in the organism. We have established a moderate complexity of life prediction model across studying the complex multifactor correlation life model. In this paper, we model the life prediction of cell division. Experiments show that our model can effectively simulate the state of cell division. Through the model of reference, we will use it for the equipment of the complex life prediction.