Polyethylene terephthalate (PET) is widely used across various industries owing to its versatility and favorable properties, including application in beverage bottles, food containers, textile fibers, engineering resins, films, and sheets. However, polymer materials are susceptible to degradation from factors such as light, oxygen, and heat. Therefore, it is crucial to understand the structural changes that occur during degradation and the extent of these changes. This report investigates the structural alterations in PET films resulting from ultraviolet (UV) irradiation utilizing pyrolysis–gas chromatography time-of-flight mass spectrometry (Py-GC-TOFMS) and matrix-assisted laser desorption/ionization–time-of-flight mass spectrometry (MALDI-TOFMS). Using the reactive Py-GC-TOFMS, we estimated the composition of the pyrolysis products resulting from UV degradation through electron ionization, soft ionization, and exact mass measurements. Additionally, artificial intelligence (AI)-based structure analysis was performed to evaluate these compounds’ structures. Notably, most degradation products were not found in the National Institute of Standards and Technology database, underscoring the effectiveness of our approach. Using MALDI-TOFMS analysis, we determine the changes in the end groups before and after UV irradiation. This analysis confirmed the generation of a series of carboxylic acid end groups as a result of degradation, a polymer series not detected by reactive pyrolysis GC-MS. We also explored degradation in the depth direction, demonstrating that degradation progresses gradually to depths of several micrometers. Our findings highlight the importance of employing mass spectrometry techniques for a comprehensive analysis of polymer degradation.

Host cell protein (HCP) impurities are considered a critical quality attribute of biopharmaceuticals because of their potential to compromise safety and efficacy, and LC/MS-based analytical methods have been developed to identify and quantify individual proteins instead of employing enzyme-linked immunosorbent assay to assess total HCP levels. Native digestion enables highly sensitive detection of HCPs but requires overnight incubation to generate peptides, limiting the throughput of sample preparation. In this study, we developed an approach employing native digestion on a trypsin-immobilized column to improve the sensitivity and throughput. We examined suitable databases for the identification of HCPs derived from Chinese hamster ovary (CHO) cells and selected RefSeq's Chinese Hamster as the optimal database. Then, we investigated methods to identify HCPs with greater efficiency than that of denatured in-solution digestion. Native in-column digestion not only reduced the digestion time from overnight to 10 min but also increased the number of quantified HCPs from 154 to 226. In addition to this rapid digestion methodology, we developed high-throughput LC/MS/MS with a monolithic silica column and parallel reaction monitoring-parallel accumulation-serial fragmentation. The optimized system was validated with synthetic peptides derived from high-risk HCPs, confirming excellent linearity, precision, accuracy, and low limit of detection (LOD) and limit of quantification (LOQ) (1-3 ppm). The optimized digestion and analysis method enabled high-throughput quantification of HCPs, and is expected to be useful for quality control and characterization of HCPs in antibody drugs.

The ionization and fragmentation patterns of 24 compounds with elemental composition of CmH2mO2, including isomeric esters and alkanoic acids, were investigated by atmospheric pressure corona discharge ionization collision-induced dissociation (CID) mass spectrometry in the positive-ion mode. All compounds were ionized as protonated molecules and NH4+ adducts. In addition, fragment ions were observed in mass spectra of esters other than methyl esters, which are owing to the dissociation of the alkyl group in the alcohol side from the protonated molecules. In CID spectra, protonated alkanoic acids/methyl esters split off H2O/CH3OH and CO or the alkyl group in the acid side, depending on the carbon chain length. Protonated esters (other than methyl esters) mainly fragmented the alkyl group in the alcohol side. These general rules on ionization and fragmentation patterns can provide relevant information on the discrimination of isomers.

Mass spectrometry imaging (MSI) is a technique for obtaining information on the distribution of various molecules by performing mass spectrometry directly on the sample surface. The applications range from small molecules such as lipids to large molecules such as proteins. It is also possible to detect pharmaceuticals and elemental isotopes in interstellar matter. This review will introduce various applications of MSI with examples.

The gas-phase adsorption of N2 on protonated serine (Ser, C3H7NO3), threonine (Thr, C4H9NO3), glycine (Gly, C2H5NO2), and 2-aminoethanol (C2H7NO) was investigated using a tandem mass spectrometer equipped with an electrospray ionization source and a cold ion trap. N2 molecules were adsorbed on the free X–H (X=O and N) groups of protonated molecules. Gas-phase N2 adsorption-mass spectrometry detected the presence of free X–H groups in the molecular structures, and was applied to the structural elucidation of small molecules. When the 93 structures with an elemental composition of C3H7NO3 were filtered using the gas-phase N2 adsorption-mass spectrometry results for Ser, the number of possible molecular structures was reduced to 8 via the quantification of the X–H groups. Restricting and minimizing the number of possible candidates were effective steps in the structural elucidation process. Gas-phase N2 adsorption-mass spectrometry combined with mass spectrometry-based techniques has the potential for being useful for elucidating the molecular structures of a variety of molecules.

Post-translational modifications (PTMs) of histone N-terminal tails in nucleosome core particle (NCP), such as acetylation, play crucial roles in regulating gene expression. To unveil the regulation mechanism, atomic-level structural analysis of in-vitro modified NCP is effective with verifying the PTMs of histones. So far, identification of PTMs of NCP originating from living cells has mainly been performed using mass spectrometry (MS) techniques, such as bottom-up approach. The bottom-up approach is the most established method for protein characterization, but it does not always provide sufficient information on the acetylated sites of lysine residues in the histone tails if trypsin digestion is carried out. For histone proteins, which have many basic amino acids, trypsin generates too many short fragments that cannot be perfectly analyzed by tandem MS. In this study, we investigated the in vitro acetylation sites in the histone H3 tail using a top-down sequence analysis, matrix-assisted laser desorption/ionization in-source decay (MALDI-ISD) experiment, in combination with aminopeptidase digestion. Aminopeptidase can cleave peptide bonds one-by-one from the N-terminus of peptides or proteins, generating N-terminally truncated peptides and/or proteins. As a result, it was identified that this method enables sequence characterization of the entire region of the H3 tail. Also, application of this method to H3 in in-vitro acetylated NCP enabled assigning acetylation sites of H3. Thus, this method was found to be effective for obtaining information on in-vitro acetylation of NCP for structural biology study.

Congenital disorders of glycosylation (CDG), an increasingly recognized group of diseases that affect glycosylation, comprise the largest known subgroup of approximately 100 responsible genes related to N-glycosylation. This subgroup presents various molecular abnormalities, of either the CDG-I or the CDG-II type, attributable to a lack of glycans or abnormal glycoform profiles, respectively. The most effective approach to identifying these N-glycosylation disorders is mass spectrometry (MS) using either released glycans, intact glycoproteins or proteolytic peptides as analytes. Among these, MS of tryptic peptides derived from transferrin can be used to reliably identify signature peptides that are characteristic of CDG-I and II. In the present study, matrix-assisted laser desorption/ionization (MALDI) MS was applied to various N-glycosylation disorders including ALG1-CDG, B4GALT1-CDG, SLC35A2-CDG, ATP6V0A2-CDG, TRAPPC11-CDG and MAN1B1-CDG. This method does not require the prior enrichment of glycopeptides or chromatographic separation, and thus serves as a practical alternative to liquid chromatography-electrospray ionization MS. The signature peptides are biomarkers of CDG.

We measured the Re/Os (185Re/188Os) and 187Os/188Os ratios from nanoparticles (NPs) using a multiple collector-inductively coupled plasma-mass spectrometer equipped with high-time resolution ion counters (HTR-MC-ICP-MS). Using the HTR-MC-ICP-MS system developed in this study, the simultaneous data acquisition of four isotopes was possible with a time resolution of up to 10 μs. This permits the quantitative analysis of four isotopes to be carried out from transient signals (e.g., <0.6 ms) emanating from the NPs. Iridium–Osmium NPs were produced from a naturally occurring Ir–Os alloy (ruthenosmiridium from Hokkaido, Japan; osmiridium from British Columbia, Canada; iridosmine from the Urals region of Russia) through a laser ablation technique, and the resulting nanoparticles were collected by bubbling water through a suspension. The 187Os/188Os ratios for individual NPs varied significantly, mainly due to the counting statistics of the 187Os and 188Os signals. Despite the large variation in the measured ratios, the resulting 187Os/188Os ratios for three Ir–Os bearing minerals, were 0.121±0.013 for Hokkaido, 0.110±0.012 for British Columbia, and 0.122±0.020 for the Urals, and these values were in agreement with the ratios obtained by the conventional laser ablation-MC-ICP-MS technique. The data obtained here provides a clear demonstration that the HTR-MC-ICP-MS technique can become a powerful tool for monitoring elemental and isotope ratios from NPs of multiple components.

This chapter examines the most common ionization techniques in mass spectrometry (MS), demonstrating the process of forming positively or negatively charged ions from analyte molecules. It mentions how ions can be electrically or magnetically manipulated inside the high vacuum of a mass spectrometer to facilitate mass measurement. It also highlights different mechanisms of ion formation, basic ion-source designs, their relative performances, and areas of application. The chapter explores the development of MS as a pre-eminent analytical technique, including its applications in modern physical, biological, and medical sciences. These have been driven by the development of new ionization methods. It covers ionization methods that are distinguished by the physical characteristics of the ionization process, such as desorption ionization and atmospheric pressure ionization.

Typical modes of bond cleavages of organic compounds in mass spectrometry are briefly summarized. Although these fragmentation rules can be quite useful for interpreting mass spectra of simple compounds, application to structurally complex molecules that contain multiple hetero atoms such as nitrogen or oxygen becomes increasingly difficult, because the exact location of an unpaired electron or positive or negative charges becomes obscure in precursor ions.About a decade ago, we proposed “a rule of mass shift,” which correctly predicts the m/z for observed peaks corresponding to singly charged even-electron fragment ions. The basis of the rule postulates that ions observed as peaks in an ordinary mass spectrum should be sufficiently stable to survive during the flight path in a mass spectrometer.The important recognition is that each atom in a stable ion should be in an ordinary valence state, and no free valence should be allowed. Therefore, if the cleavage of a bond leads to an ion with an unstable structure, some structural changes must take place in order for the ion to be observed in the mass spectrum. Such structural changes can be the addition of hydrogen atom(s) and/or a proton for positive ions, and the addition of a hydrogen atom and/or the elimination of two hydrogen atoms in the case of negative ions. These required structural changes in each case are schematically depicted and discussed in detail.Two typical examples are shown, in which m/z’s of the observed peaks are correctly predicted. The scope and limitations, as well as the significance of the rule for analyzing fragmentations in organic mass spectrometry are also discussed.