Recycling and sustainability constitute a major challenge to preserve human life quality and ensure a good standard of living for future generations. Like other recyclable waste products, glass waste can be a major problem if it is not recycled. When glass waste is turned into powder, environmental impacts are minimized by reducing or eliminating the dependency on landfills. Within this context, the objective of this work is to design a low-cost glass crusher machine that can be acquired by individuals. For this purpose, a glass crusher machine based on the ball mill concept is designed to transform glass waste into powder of 2 mm particle size. The main enhanced features of this machine with respect to state-of-the-art designs are the continuous feed aspect and the powder discharge technique. The design methodology consisted of mathematical modeling coupled with numerical simulations to ensure a safe and functioning design. This was achieved via different types of simulations using SolidWorks: static stress analysis, free vibration analysis, and motion study. Finally, a market study shows that a breakeven period is reached after a period of 5 months.

The study presents results of computer simulation by finite elements method of a new metal forming process combining the deformation of a billet with round cross-section on a radial-shear rolling mill and subsequent billet twisting in a forming die with a specific design. To analyze the efficiency of metal processing, the main parameters of the stress–strain state are considered: effective strain, effective stress, average hydrostatic pressure, and Lode–Nadai coefficient. The maximum value of effective strain up to 13.5 is achieved when a screw profile on the billet in the die is forming, which indicates an intensive refinement of the initial structure of the billet. During combined process, the nature of the deformation changes in the transverse direction from the axis of rotation to the surface. The central area of the billet is under the action of tensile stresses. In the peripheral part, compressive stresses grow. In the surface area, Lode–Nadai coefficient is 0.1 approximately, which indicates the high level of shear strain.

This paper reports the wind pressure characteristics on long-span roofs under fluctuating wind in a vertical direction based on a large eddy simulation (LES). Three types of roofs, i.e., saddle, wavy, and continuous arch roofs, are tested. First, the membrane structure canopy is measured, and the model is established for numerical simulation. The computational models and methods are verified by comparing the obtained wind pressure distributions on the roof with the measured results and numerical simulation results under other methods. Next, a numerical simulation is performed to understand not only the wind pressure and the wind speed time series but also the wind vibration responses and fluid-solid coupling. The effects of lateral fluctuating wind at different wind speeds on the wind-induced vibration response and wind pressure distribution of different membrane structures are studied. Based on the results, the wind pressure zones of the roofs are discussed. Furthermore, the original structures are optimized and numerically simulated considering the streamlined design concept to study the influence mechanism of fluctuating wind on the roof in more detail.

The influence of masonry infill walls on the progressive collapse performance of reinforced concrete (RC) frame structures was investigated in this paper, using a nonlinear dynamic analysis approach. Based on ANSYS/LS-DYNA finite element software, two finite element models of RC frame structures with and without masonry infilled walls were established. Then, the collapse modes of the two RC frame structure models were analyzed for different scaled distance blast loads, different locations of column damage, and different span numbers. The results show that with the increase of explosive amount, the collapse degree of the structure is more serious in the same time. Under the condition of destroying the outermost central column, the degree of progressive collapse of the RC frame model with infilled walls in the same time is lower than that of the RC frame model without infilled walls. The RC frame model with infilled walls is more resistant to collapse when the outermost side columns are damaged. With the increase of span number, the structure is more likely to be damaged and collapsed.

The phenomenon of vehicle rollover usually occurs when the driver suddenly steers at high speed. The centrifugal force will appear and cause the vehicle’s body to tilt. To overcome this situation, the solution of using the stabilizer bar is proposed. The passive stabilizer bar has a simple structure, low cost, and long service life. As a result, it is now a standard on most vehicles. This paper has established a dynamic model to describe a vehicle’s oscillation. As a result of the study, the maximum roll angle of the vehicle was reduced from 9.0° to 8.2° when the stabilizer bar was used. Besides, the minimum value of the vertical force at the wheel reached 485(N) and 1162(N), respectively, corresponding to the two survey cases. The movement trajectory of the vehicle when using the stabilizer bar does not have a big difference compared to the case when the vehicle does not use the stabilizer bar. So, the vehicle’s stability and safety can be effectively improved. This is the basis for further developing complex stable bar patterns in the future.

Numerical modeling and analysis of the baking process are challenging biochemical processes occurring in bread. These changes result from mass engineering tasks, usually characterized by the complex chain of chemical, physical, and heat transfer processes impacting the baking at the same time primarily caused by a variation of two dominating factors: (i) the heat and (ii) the internal moisture content at different temperatures and during the time’s process. This study presents an analysis of the 1-D computational fluid dynamics model for simultaneous heat transfer within a cylindrical bread sample. The numerical simulations were performed using the finite difference model (FDM) and the finite element model (FEM). In the first case, the proposed numerical model considered radiation and convection during sample heating and described the sample’s simultaneous heat, water, and vapor diffusion mechanisms. The calculations indicated that the FDM was susceptible to the time step; consequently, the range of 10 s and 100 s yielded the only relevant results. In the second case, the FEM was used to describe the phenomena of transportation during baking. Results obtained by the FEM showed a large temperature gradient near the surface. The study showed the presence of some critical cases that are considered the most influential on the stages of bread production. The first critical value is the time when the baking temperature reaches 100° C. The second critical value is the time when the liquid water content in the baking medium reaches its peak. The boundary conditions were examined and illustrated by figures in the center and the surface of the bread.

Numerical analysis of heat transfer mechanisms and flow topologies for the heat exchanger square channel (HESC) installed with the double-inclined baffles (DIB) is reported. The main objective of the present research is to study the influences of DIB height to duct height ( b / H = 0.05 – 0.30 ), DIB distance to duct height ( P / H = 1 – 1.5 ), and flow attack angle ( α = 30 ° and 45 ° ) on the flow topologies, heat transfer features, and thermal performances. The Reynolds numbers (based on the entry HESC around 100–2000) are analyzed for the present problem. The numerical models of the HESC installed with the DIB are solved with finite volume method (commercial code). The simulated results of the HESC installed with the DIB are reported in forms of flow topologies and heat transfer characteristics. The Nusselt numbers (Nu), friction factors ( f ), and thermal enhancement factors (TEF) of the HESC placed with the DIB are offered. As the numerical results, it is seen that the DIB produces the vortex streams and impinging streams in all cases. The vortex streams and impinging streams disturb the thermal boundary layer on the HESC walls that is a key motive for the growth of heat transfer rate. The best TEF of the HESC installed with the DIB is about 3.87 at P / H = 1 , α = 30 ° , Re = 2000 , and b / H = 0.15 . Additionally, the TEF contours, which help to design the HESC inserted with the DIB, are performed.

In this paper, we use an analysis function for gas diffusion known as the Research Institute for Applied Mechanics, Kyushu University, Computational Prediction of Airflow over Complex Terrain (RIAM-COMPACT), which was developed for complex terrain, in Airflow Analyst software, and apply it to the spread and dissipation of a fluid layer (assuming the fluid layer contains COVID-19 particles). First, to verify the prediction accuracy of the gas diffusion using RIAM-COMPACT, comparisons with past wind tunnel test results conducted on simple and complex terrains are presented under neutral atmospheric stability. The results of the numerical simulations carried out in this study show good agreement with the wind tunnel experiments for both simple and complex terrains. Next, a model of the Japan National Stadium (Tokyo Olympic Stadium) was constructed using 3D detailed topographic Advanced World 3D Map (AW3D) data generated by combining high-resolution satellite images. We tried to reproduce the hypothetical spread and dissipation of the fluid layer (assuming the fluid layer contains COVID-19 particles) inside and outside of the Japan National Stadium using Airflow Analyst implemented with the RIAM-COMPACT analysis function for gas diffusion. We paid special attention to the effect of wind ventilation driven by natural wind. The numerical results under various scenarios show that ventilation driven by natural wind is very effective for the Japan National Stadium.

Simulation is a virtual representation of a dynamic system. For the case of mechanical systems, the simulator is used to calculate the reaction forces between its base and the ground and other constraints. The intermittent nature of these forces and the mathematical inequalities that they must satisfy lead to models described by hybrid algebraic differential equations. In this paper, a simulator was developed for a seven degrees of freedom planar biped robot, which was modeled using the Euler-Lagrange formulation. This model allowed the design and implementation of a control strategy for balance management, and the monitoring of articular reference paths are tested in the simulator before proceeding to implementation on the actual prototype.

Image reconstruction algorithm and its controller constitute the main modules of the electrical capacitance tomography (ECT) system; in order to achieve the trade-off between the attainable performance and the flexibility of the image reconstruction and control design of the ECT system, hardware-software codesign of a digital processing unit (DPU) targeting FPGA system-on-chip (SoC) is presented. Design and implementation of software and hardware components of the ECT-DPU and their integration and verification based on the model-based design (MBD) paradigm are proposed. The inner-product of large vectors constitutes the core of the majority of these ECT image reconstruction algorithms. Full parallel implementation of large vector multiplication on FPGA consumes a huge number of resources and incurs long combinational path delay. The proposed MBD of the ECT-DPU tackles this problem by crafting a parametric segmented parallel inner-product architecture so as to work as the shared hardware core unit for the parallel matrix multiplication in the image reconstruction and control of the ECT system. This allowed the parameterized core unit to be configured at system-level to tackle large matrices with the segment length working as a design degree of freedom. It allows the trade-off between performance and resource usage and determines the level of computation parallelism. Using MBD with the proposed segmented architecture, the system design can be flexibly tailored to the designer specifications to fulfill the required performance while meeting the resources constraint. In the linear-back projection image reconstruction algorithm, the segmentation scheme has exhibited high resource saving of 43% and 71% for a small degradation in a frame rate of 3% and 14%, respectively.