With the development of high-speed railway (HSR) systems, high-speed rail express delivery (HSReD) is currently the growing trend in railway cargo transport. The decisions on line planning and freight flow allocation are two of the main problems for the practical operation of HSReD. This paper focuses on integrating the above issues, considering differentiated transportation modes and products. A collaborative optimisation model is developed to maximise the benefits of freight transport. Numerical experiments are conducted based on the Beijing-Shanghai HSR. The results show that the collaborative optimisation model gets a 7.96% higher freight-demand fulfilment rate and an 18.64% increase in the profit rate, compared with the two-stage model under the same network conditions and parameter settings. Some operational implications are also obtained based on the sensitivity analysis, which is potentially useful for optimising the daily operation management of HSReD.

Instrument flight procedures are essential and critical components of the global aviation system. They are designed for all phases of flight, i.e. the standard instrument departures, standard instrument arrivals, instrument approaches and the en-route phase of flight. Instrument flight procedures are designed from various aeronautical data, information, dimensions, etc., which are named instrument flight procedure elements according to this paper. Development of air navigation systems affect design of instrument flight procedures and flexible use of airspace. The design process is carried out within a framework defined by international and national standards, organizational norms and economic aspects. Instrument flight procedure elements are a fundamental part of the process. Deviations of these elements from full compliance with international regulations can significantly and negatively affect air traffic safety. The objective of this paper was to investigate the basic prerequisites for statistical analysis of the design quality of instrument flight procedures, which have not been explored before. Six prerequisites were proposed for acquiring the data and preparing them for further statistical use.

This article deals with the highly topical issue of greening air transport chains. It is important to consider the environmental aspect of the current performance of air transport in regions with less intensive air transport chains, such as the Eastern Adriatic. The regional airports of Ljubljana, Zagreb and Belgrade are dependent on European air cargo hubs and at the same time have the task of connecting the national airports in Sarajevo, Podgorica, etc., which complicates the functioning of air transport chains regionally. A comprehensive consideration of air cargo chains is important in terms of price and transport time, but also in terms of the GHG footprint. The results show that an environmental assessment of air transport chains is necessary for a more comprehensive decision on sustainable supply chains. The study enriches the scientific understanding of air transport chains in the Eastern Adriatic region from the point of view of carbon footprint and energy efficiency of transport, and highlights the need to use the already developed IT tools in the assessment and modelling of transport chains when different options are presented to cargo owners. Integrating the above approaches and data into current business models enables the gradual regional decarbonisation of air transport.

Effectively equilibrating passenger distribution on metro platforms and carriages is important for relieving local congestion. This paper explores the role of incentive mechanisms in encouraging passenger queuing behaviours. To quantitatively analyse passenger compliance with the policy, a questionnaire survey was conducted in Fuzhou, China. According to the preliminary analysis of the survey data, passengers have various moving distance preferences under the incentive scenarios, namely, no movement, smaller distance and greater distance. Additionally, this paper establishes a nested logit model that considers travel purposes and moving distances. The empirical results show that although monetary and point-system incentives can effectively enhance passenger compliance with transfer queue-positioning requirements, when the moving distance is very small, people pay less attention to rewards. Compared to those commuting on weekends, passengers commuting on weekdays comply with policies more strongly, and the effect of implementing incentive policies is better; however, the effect of those policies is reduced among those travelling for leisure. Meanwhile, when travelling for leisure, as the number of companions increases, people’s willingness to follow guidance on where to wait increases. According to the results, the implementation of incentive-based waiting encouragement policies during peak working days can result in good compliance.

This paper presents the main challenges of integrating micromobility vehicles into modern traffic and transportation systems. Although micromobility seems to be an effective concept for the first and last mile, the reality points to the potential problems that the integration of micromobility vehicles can create and that must be resolved appropriately. Micromobility vehicles are characterised by extensive development, which is not accompanied by appropriate legal regulations. The street design has its spatial limitations and usually separates non-motorised and motorised users, which is a notion that could be disrupted by new micromobility options. When it comes to Serbia, the existing legislation does not recognise the majority of micromobility vehicles, which results in the lack of safety of these participants and their place in the street profile. The aim of this paper is to provide guidelines for improving the existing regulations and integrating these vehicles into the traffic system of Serbia, with special reference to general recommendations through which micromobility vehicles can be treated in other countries. The results of this paper can be useful to decision-makers but also to all other participants in the process of developing effective policies and strategies for the integration of micromobility vehicles into traffic and transportation systems.

Road elements are increasingly digitalized to provide drivers advanced assistance especially in the emergent or adverse conditions. It is challenging and expensive to accurately digitalize all the road elements especially on the urban roads with many infrastructures and complex designs, where we may focus on the most important ones at the first stage. This research designs a questionnaire to ask the drivers to rank the importance of the road elements in various driving conditions. Driver characteristics are also collected, including age, driving style, accident experience, and accumulated driving distance, to explore their effect on drivers’ cognition of road elements importance. It is found that driving is a complex activity, and the moving elements (e.g. surrounding cars) are more important than the non-moving ones. Attention should be paid to the road elements even distant from the ego car, to get prepared to the potential driving risk or penalty. Statistical difference between the experienced and non-experienced drivers recommends that driver assistance system should be sufficiently trained in various conditions, to build up autonomous driving tactics and skills. This research promotes the understanding of driving cognition pattern to provide insights into the development of road digitalization.

Heinrich’s Law indicates an empirical ratio between serious accidents, minor accidents and near misses in industrial sites, but has not been discussed in the context of road traffic accidents. Digital tachographs (DTG), a type of IoT device collecting spatiotemporal big data of vehicle trajectories, allow0 for examining a linkage between abnormal driving behaviours and the prevalence of road traffic incidents. According to the Traffic Safety Act implemented in 2011, DTG has been mandatorily pre-installed on most commercial vehicles in South Korea. The data have been analysed to evaluate the data processing method or promote eco-driving or safe driving, but only a few studies have examined an association between driving behaviours and actual traffic accidents using the limited data. We obtained 7,785,124 DTG sensing records from 1,523 commercial taxis driving within the city limits of Seoul at least once in 2013 and integrated them with 57,139 traffic accident cases during the same period. Using the integrated GIS database, we performed a grid-based spatiotemporal mapping and analysis to calculate a ratio among abnormal driving events, minor and major traffic accidents by road type. The findings suggest a potential for enhancing road safety by monitoring and controlling abnormal driving patterns as a precursor for accidents.

Urban rail transit plays a very important role in cities’ social and economic development. To ensure the safe and stable operation of urban rail transit operation equipment and facilities, it is necessary to monitor a large number of safety hazard statuses and data and improve the over-centralisation of traditional monitoring. This paper designs a scheme for storing, validating and monitoring the safety hazard status of urban rail transit operation equipment and facilities based on blockchain technology. The safety hazards of equipment and facilities during the operation stage of urban rail transit are listed using the literature analysis method and the case study method. The European RAMS (reliability, availability, maintainability and safety) standard method is used to determine the safety hazard status of equipment and facilities by availability index. Based on the features of the consensus mechanism, smart contract and other features of blockchain technology, this paper designs an overall scheme for storing, verifying and monitoring the safety hazard status of equipment and facilities. This scheme provides a practical operation method for evaluating the safety hazard status of rail transit equipment and facilities, which is conducive to the safety rectification of the entire urban rail transit.

Electric buses (EBs) have attracted more and more attention in recent years because of their energy-saving and pollution-free characteristics. However, very few studies have considered the impact of stochastic traffic conditions on their operations. This paper focuses on the departure interval optimisation of EBs which is a critical problem in the operations. We consider the stochastic traffic conditions in the operations and establish a departure interval optimisation model. The objective function aims at minimising passenger travel costs and enterprise operation costs, including waiting time costs, congestion costs, energy consumption costs and operational fixed costs. To solve this problem, a genetic algorithm (GA) based on fitness adjustment crossover and mutation rate is proposed. Based on the Harbin bus dataset, we find that improved GA performance is 4.481% higher, and it can solve the models more accurately and efficiently. Compared with the current situation, the optimisation model reduces passenger travel costs by 20.2% and helps improve passenger travel quality. Under stochastic traffic conditions, total cost change is small, but passenger travel costs increase significantly. This indicates the high impact degree of random traffic conditions on passenger travel. In addition, a sensitivity analysis is conducted to provide suggestions for improving the EBs operation and management.

It is generally known that traffic safety is influenced by humans, vehicles, and roads. Nowadays, when new technologies have taken over a large part of the traffic industry, the selection of relevant software, whose competition is great, presents a big problem for the decision-maker. Intelligent systems, such as Motion, SCOOT, and SCATS, are used for the implementation of a control strategy in order to manage signals on the traffic network, with the goal of increasing efficiency and traffic safety. These systems operate on the demand-responsive principle and have logic for traffic optimization which represents their main difference along with the optimization subject and method of the system functioning. The research included consideration of mentioned differences, software, and hardware architecture that have a significant impact on the system’s functionality since the detector’s locations themselves depend on the optimization subject. The implementation benefits are considered through the existing world’s projects. Based on the obtained data, the criteria used for the comparative analysis of these three systems were defined, from the aspect of traffic safety.