The dramatic increase in atmospheric carbon dioxide (CO2) concentrations has attracted human attention and many strategies about converting CO2 into high-value chemicals have been put forward. Metal-organic frameworks (MOFs), as a class of versatile materials, have been widely used in CO2 capture and chemical conversion, due to their unique porosity, multiple active centers and good stability and recyclability. Herein, we focused on the processes of chemical conversion of CO2 by MOFs-based catalysts, including the coupling reactions of epoxides, aziridines or alkyne molecules, CO2 hydrogenation, and other CO2 conversion reactions. The synthesized methods and high catalytic activity of MOFs-based materials were also analyzed systematically. Finally, a brief perspective on feasible strategies is presented to improve the catalytic activity of novel MOFs-based materials and explore the new CO2 conversion reactions.

Plasmonic nanoparticles (NPs) are one of the most promising and studied inorganic nanomaterials for different biomedical applications. Plasmonic NPs have excellent biocompatibility, long-term stability against physical and chemical degradation, relevant optical properties, well-known synthesis methods and tuneable surface functionalities. Herein, wereview recently reported bioconjugated plasmonic NPs using different chemical approaches and loading cargoes (such as drugs, genes, and proteins) for enhancement of transdermal delivery across biological tissues. The main aim is to understand the interaction of the complex skin structure with biomimetic plasmonic NPs. This knowledge is not only important in enhancing transdermal delivery of pharmaceutical formulations but also for controlling undesired skin penetration of industrial products, such as cosmetics, sunscreen formulations and any other mass-usage consumable that contains plasmonicNPs.

N-Heterocyclic carbene (NHC) catalysis can access umpolung reactivity of carbonyl compounds as acyl anions, enolates and homoenolates. Considerable progress has been made in asymmetric transformation by the introduction of chirality to the NHC scaffold. However, the single catalyst system has limitations in chemo-, regio- and stereoselectivity. A solution to these problems has recently emerged with the synergistic combination of NHC catalysis and metal catalysis. A number of NHC/metal combinations have been found not only to improve reactivity and stereoselectivity, but also to enable access to unprecedented transformations. This paper highlights examples of successful asymmetric NHC/metal cooperative catalysis.

A methodology for photocatalytic reactor modeling applied to advanced oxidation processes for chemical pollution abatement is presented herein. Three distinct reactor configurations typically employed in the field of air and water purification-wall reactors, slurry reactors, and fixed-bed reactors-are considered to illustrate the suggested approach. Initially, different mechanistically derived kinetic expressions to represent the photocatalytic rate of pollutant degradation are reviewed, indicating the main assumptions made by the authors in the published contributions. These kinetic expressions are needed to solve the mass balances of the reactant species in the photocatalytic reactors. As is well known, at least one of the steps of the reaction mechanism requires evaluation of the rate of electron-hole generation, which depends on the photon absorption rate: a volumetric property for reactions with the catalyst particles in aqueous suspension or a surface property for systems with a fixed catalyst deposited on an inert support. Subsequently, the different techniques for evaluating the optical properties of slurry and immobilized systems, and the numerical methods applied to calculate the photon absorption rate, are described. The experimental and theoretical results of pollutant degradation in each reactor type are then presented and analyzed. Finally, the definition, calculation, and relevance of different efficiency parameters are briefly reviewed. Using these illustrative examples, we emphasize the need for a systematic and rigorous approach for photocatalytic reactor modeling in order to overcome the inherent drawbacks of photocatalysis and to improve the overall efficiency of the process.

Elemental sulfur is an abundant and inexpensive chemical feedstock, yet it is underused as a starting material in chemical synthesis. Recently, a process coined inverse vulcanization was introduced in which elemental sulfur is converted into polymers by ring-opening polymerization, followed by cross-linking with an unsaturated organic molecule such as a polyene. The resulting materials have high sulfur content (typically 50-90% sulfur by mass) and display a range of interesting properties such as dynamic S-S bonds, redox activity, high refractive indices, mid-wave IR transparency, and heavy metal affinity. These properties have led to a swell of applications of these polymers in repairable materials, energy generation and storage, optical devices, and environmental remediation. This article will discuss the synthesis of polymers by inverse vulcanization and review case studies on their diverse applications. An outlook is also presented to discuss future opportunities and challenges for further advancement of polymers made by inverse vulcanization.

Graphene-based carbocatalysts owing to numerous amazing properties such as large specific surface area, high intrinsic mobility, excellent thermal and electrical conductivities, chemical stability, ease of functionalization, simple method of preparation, effortless recovery and recyclability have gained a superior position amongst the conventional homogeneous and heterogeneous catalysts. In this review, an endeavor has been made to highlight the syntheses of diverse heterocyclic compounds catalyzed by graphene-based catalysts. Further, the study also reveals that all the catalysts could be reused several times without significant loss in their catalytic activity. Additionally, most of the reactions catalyzed by graphene-based carbocatalysts were carried out at ambient temperature and under solvent-free conditions. Thus, the graphene-based catalysts do not merely act as efficient catalysts but also serve as sustainable, green catalysts. This review is divided into various sub-sections, each of which comprehensively describes the preparation of a particular heterocyclic scaffold catalyzed by graphene-derived carbocatalyst in addition to synthesis of graphene oxide and reduced graphene oxide, functionalization, and structural features governing their catalytic properties. Synthesis of heterocycles catalyzed by graphene-based carbocatalysts.

Despite its attractive features as a power source for direct alcohol fuel cells, utilization of ethanol is still hampered by both fundamental and technical challenges. The rationale behind the slow and incomplete ethanol oxidation reaction (EOR) with low selectivity towards CO2 on most Pt-based catalysts is still far from being understood, and a number of practical problems need to be addressed before an efficient and low-cost catalyst is designed. Some recent achievements towards solving these problems are presented. Pt film electrodes and Pt monolayer (PtML) electrodes on various single crystal substrates showed that EOR follows the partial oxidation pathway without C-C bond cleavage, with acetic acid and acetaldehyde as the final products. The role of the substrate lattice on the catalytic properties of PtML was proven by the choice of appropriate M(111) structure (M = Pd, Ir, Rh, Ru and Au) showing enhanced kinetics when PtML is under tensile strain on Au(111) electrode. Nanostructured electrocatalysts containing Pt-Rh solid solution on SnO2 and Pt monolayer on non-noble metals are shown, optimized, and characterized by in situ methods. Electrochemical, in situ Fourier transform infrared (FTIR) and X-ray absorption spectroscopy (XAS) techniques highlighted the effect of Rh in facilitating C-C bond splitting in the ternary PtRh/SnO2 catalyst. In situ FTIR proved quantitatively the enhancement in the total oxidation pathway to CO2, and in situ XAS confirmed that Pt and Rh form a solid solution that remains in metallic form through a wide range of potentials due to the presence of SnO2. Combination of these findings with density functional theory calculations revealed the EOR reaction pathway and the role of each constituent of the ternary PtRh/SnO2 catalyst. The optimal Pt:Rh:Sn atomic ratio was found by the two in situ techniques. Attempts to replace Rh with cost-effective alternatives for commercially viable catalysts has shown that Ir can also split the C-C bond in ethanol, but the performance of optimized Pt-Rh-SnO2 is still higher than that of the Pt-Ir-SnO2 catalyst.

The identification of active sites in electrocatalytic reactions is part of the elucidation of mechanisms of catalyzed reactions on solid surfaces. However, this is not an easy task, even for apparently simple reactions, as we sometimes think the oxidation of adsorbed CO is. For surfaces consisting of non-equivalent sites, the recognition of specific active sites must consider the influence that facets, as is the steps/defect on the surface of the catalyst, cause in its neighbors; one has to consider the electrochemical environment under which the "active sites" lie on the surface, meaning that defects/steps on the surface do not partake in chemistry by themselves. In this paper, we outline the recent efforts in understanding the close relationships between site-specific and the overall rate and/or selectivity of electrocatalytic reactions. We analyze hydrogen adsorption/desorption, and electro-oxidation of CO, methanol, and ammonia. The classical topic of asymmetric electrocatalysis on kinked surfaces is also addressed for glucose electro-oxidation. The article takes into account selected existing data combined with our original works.

Carbon nanotube thin films have attracted considerable attention because of their potential use in flexible/stretchable electronics applications, such as flexible displays and wearable health monitoring devices. Due to recent progress in the post-purification processes of carbon nanotubes, high-purity semiconducting carbon nanotubes can be obtained for thin-film transistor applications. One of the key challenges for the practical use of carbon nanotube thin-film transistors is the thin-film formation technology, which is required for achieving not only high performance but also uniform device characteristics. In this paper, after describing the fundamental thin-film formation techniques, we review the recent progress of thin-film formation technologies for carbon nanotube-based flexible electronics.

Traditionally employed in the synthesis of small ring systems and rearrangement chemistry, sulfur-based ylides occupy a unique position in the toolbox of the synthetic organic chemist. In recent years a number of pioneering researchers have looked to expand the application of these unorthodox reagents through the use of transition metal catalysis. The strength and flexibility of such a combination have been shown to be of key importance in developing powerful novel methodologies. This chapter summarises recent developments in transition metal-catalysed sulfonium/sulfoxonium ylide reactions, as well as providing a historical perspective. In overviewing the successes in this area, the authors hope to encourage others into this growing field.