- Research Article
- 10.1016/j.ijpx.2026.100518
Advancing preclinical research with reconstructed in vitro skin models mimicking non-healing wounds.
- Jun 01, 2026
- International journal of pharmaceutics: X
- Regina Gomes Daré + 3 more +3
Publications from 2021 to 2026
Showing 10 of 186 papers
Advancing preclinical research with reconstructed in vitro skin models mimicking non-healing wounds.
Correction: Avoiding drying-artifacts in transmission electron microscopy: Characterizing the size and colloidal state of nanoparticles.
Bio‐Inspired Magnetically Tunable Structural Colors from Elliptical Self‐Assembled Block Copolymer Microparticles
Abstract Cephalopods achieve their vivid, dynamic structural coloration through reconfigurable lamellar reflectors, acting as a powerful inspiration for adaptive optical materials. However, synthetic systems that replicate this functionality typically require complex material architectures or multistep fabrication processes. Here, a straightforward strategy is presented for producing magnetically responsive photonic microparticles using linear poly(styrene)‐ b ‐poly(2‐vinylpyridine) block copolymers. Self‐assembly in emulsion droplets yields ellipsoids with stacked lamellar domains that exhibit structural colors spanning the entire visible spectrum. Blending block copolymers with different molecular weights enables precise, continuous control over lamellar periodicity and photonic bandgap spectral position, eliminating the need for chemical modification or the use of swelling agents. Notably, incorporating superparamagnetic iron oxide nanoparticles imparts rapid and reversible magnetic alignment of the microparticles. This orientation aligns the lamellar stacks perpendicular to the magnetic field, resulting in Bragg reflection and angle‐dependent coloration. The reflected wavelength can be tuned by changing the viewing angle, which mimics the dynamic optical responses of biological iridophores. Compared to prior systems, our approach reduces synthetic complexity while maintaining high color intensity and angular tunability. Thus, this work introduces a bio‐inspired materials concept that offers a simple route toward dynamically tunable optical materials for adaptive camouflage, smart coatings, and next‐generation photonic devices.
Read moreEnhancing the miRNA Detection Sensitivity of DNA Origami Book Biosensors Using Lock Modifications and a Polymer Additive
DNA origami‐based biosensors provide a powerful and programmable platform for sensitive and specific molecular diagnostics. In this study, a dynamic DNA origami book biosensor is validated for direct detection of microRNA21 (miR‐21) in complex biological fluids, including human serum and plasma. Two optical readouts are engineered and tested: Förster resonance energy transfer (FRET) and fluorescence quenching using precisely arranged donor‐acceptor fluorophore pairs. To improve sensitivity, detection occurs under varied conditions, including modifications to the lock mechanism (fluorine‐modified bases and locked nucleic acid) and the addition of a biocompatible polymer, diethylene glycol (DEG). The biosensor maintains specificity in spiked serum, plasma, and clinical plasma samples from breast cancer patients. Single origami nanostructure detection experiments show that target miRNAs are identified within 10 min, with limits of detection (LoD) of 0.69 pm in buffer with LNA, 8.86 pm in 100% serum, and 23.24 pm in 100% plasma, without enzymatic amplification. Importantly, simultaneous detection of miR‐21 and miR‐7a in clinical plasma samples is demonstrated, underscoring the platform's potential for personalized diagnostics and liquid biopsy applications. These results show that tuning the lock mechanism and adding polymers enhances sensitivity and enables adaptable performance, advancing nanotechnology‐based biomarker profiling, including diverse microRNA detection.
Read moreInterfacial halogen bonding with charge-transport layers for operational stability of hybrid perovskite solar cells
Hybrid metal halide perovskites have emerged as some of the leading semiconductors in photovoltaics. Despite their remarkable power conversion efficiencies, these materials remain unstable under device operating conditions. One of the main instabilities relates to the interface with the contact layers in photovoltaic devices, such as metal oxides. We rely on halogen bonding (XB) using 1,4-diiodotetrafluorobenzene (TFDIB) to modulate the interface of the TiO2 electron-transport layer, demonstrating the improvement of perovskite solar cell operational stability. Furthermore, we complement this strategy with the use of iodo-functionalized Zn–phthalocyanine modulator of the hole-transporting material, which passivate the interface while enhancing the power conversion efficiency, showcasing the potential of XB in hybrid photovoltaics.
Read morePulmonary effects of inhalation exposure to propylene glycol ethers on blood gas diffusion - a human and in vitro study.
Propylene glycol ethers (PGEs) are volatile organic compounds commonly used as solvents in occupational and household products, making inhalation exposure ubiquitous. Although some PGEs are upper airway irritants, the underlying pulmonary effects of inhalation exposure to PGEs remain unknown. Darkened blood color was previously observed following human inhalation exposure to PGEs, suggesting reduced blood oxygenation and gas diffusion in the lungs. Pulmonary effects of the most common PGEs, propylene glycol monomethyl ether (PGME) and butyl ether (PGBE), were investigated in healthy participants and in in vitro cultures. Eleven participants were exposed to PGME (35ppm) and PGBE (15ppm) for four hours in a whole-body exposure chamber. Variations in alveolar gas diffusion, capillary blood gas, respiratory and heart rates, and inflammation-related blood parameters were tested before, during, and after exposure. PGME and PGBE's effects on alveolar membrane functions, lung inflammation, and cell viability were further assessed in vitro. Human exposure to PGME and PGBE showed a decrease in capillary blood oxygenation. Exposures of human alveolar cocultures revealed functional alveolar membrane changes at low PGME/PGBE concentrations. Variations in circulating blood parameters in humans were observed in response to both chemicals, with slightly increased cytotoxicity and inflammation in vitro. Our results suggest PGEs exposure reduced capillary blood oxygenation in participants, likely via altered alveolar membrane functions. These findings prompt inquiries regarding potential pulmonary effects among individuals routinely exposed to PGEs, particularly in occupational settings, as reported in epidemiological studies.
Read moreFrom Invisible to Visible: Pressure‐Responsive Photonic Crystals for Advanced Information Encryption
Abstract Counterfeiting has emerged as an increasingly severe global concern, posing significant threats to the security of individuals and society. In this study, a series of multilayered information‐encrypted composite materials is developed by embedding a chiral nematic cellulose nanocrystal ( cn ‐CNC) film inside a shape‐memory polymer (SMP) matrix to produce pressure‐responsive photonic crystals. The design also incorporates a cellulose acetate film, as a thermoset information carrier, and graphene oxide (GO), as a secrecy filter. In its initial state, the composite shows no information, while a pattern becomes visible to reveal the information upon hot‐pressing, due to the region‐dependent differences in its photonic responsiveness caused by the rigid pattern. A discernible mark remains even after recovery, serving as tangible evidence of the decrypted information. Moreover, the high color fidelity of these materials is confirmed using reflectance spectroscopy and color analysis over multiple cycles, demonstrating their potential in cyclic information encryption. By harnessing thermal and mechanical stimuli for anti‐counterfeiting purposes, these composites diversify the strategies available for information encryption.
Read moreTunable Photonic Paints via Block Copolymer Self-Assembly and Refractive Index Engineering.
Structurally colored paints based on photonic microparticles offer an intriguing alternative to conventional pigment-based colorants but face persistent challenges related to limited color vibrancy and excessive light scattering. In this work, we present a scalable strategy to fabricate water-based photonic paints using poly-(2-vinylpyridine)-block-poly-(methyl methacrylate) (P2VP-b-PMMA) microparticles formed via confined self-assembly in emulsion droplets. These microparticles exhibit a concentric lamellar morphology, resulting in a photonic bandgap in the visible spectral region. Selective incorporation of 2,4,6-triiodophenol (TIPh) into the P2VP domains increases the refractive index contrast between microphase-separated domains, giving rise to tunable and more intense structural colors compared to additive-free microparticles. Detailed optical and structural characterization reveals a correlation among additive content, photonic bandgap position, and structural ordering. To reduce diffuse scattering and enhance color saturation, the broadband absorber Sudan Black B (C29H24N6) is then coassembled within the microparticles. These photonic pigments are finally combined with a waterborne polyurethane binder to produce robust, vividly colored coatings. The binder improves film homogeneity, reduces interparticle scattering, and enhances mechanical integrity. This multicomponent approachintegrating refractive index engineering, pigment dispersion control, and optical absorptionenables the fabrication of structurally colored paints with improved vibrancy, uniformity, and tunability.
Read morePhotoacid‐Induced Supramolecular Network Disassembly: A Systems Approach to Stimuli‐Responsive Polymers
Abstract The introduction of supramolecular (SM) motifs allows the design of stimuli‐responsive polymers whose physical properties can be changed by external triggers that affect the SM binding. However, using this approach to create light‐responsive materials that can be switched under isothermal conditions proves to be challenging. Here, we report a material systems approach to achieve this. Thus, SM polymer networks, in which optically inert ureidopyrimidinone (UPy) groups assemble into reversible cross‐links, are combined with a trigger molecule, the photoacid generator (PAG) 2‐(4‐methoxy‐styryl)‐4,6‐bis(trichloromethyl)‐1,3,5‐triazine (MBTT). Model experiments with a fluorescent, self‐reporting UPy motif elucidate the sequence of processes that result from optical triggering, namely acid generation, protonation of UPy groups, and ultimately dissociation of the SM cross‐links. The optically stimulated transformation of gels and rubbery films into viscous liquids was quantitatively monitored by opto‐rheological measurements, showing that the optical stimulation and resultant mechanical responses are intimately coupled. The potential usefulness of this approach to create materials with spatially graded mechanical characteristics and as the basis for debonding‐on‐demand (DOD) adhesives was explored in proof‐of‐concept experiments.
Read moreToward Dynamic Control of Hybrid Materials in Photovoltaics and Beyond