- Research Article
- 10.1149/ma2025-02412042mtgabs
Next Generation of Improved High Temperature Membrane Electrode Assembly for Aviation
- Nov 24, 2025
- Electrochemical Society Meeting Abstracts
- Manon Prioux + 4 more +4
The aviation industry is facing one of its greatest challenges: how to reduce its CO2 emissions in the context of a constantly increasing air traffic. High Temperature Proton Exchange Membrane Fuel Cell (HT-PEMFCs) technology is of great interest for aviation, due to its easier thermal management, a simplified water management system and lower weight. However, the current Membrane Electrode Assembly (MEA) of HT-PEMFCs operating at 160°C are not at the expected level of performance. In this context, the NIMPHEA project aims to develop a new generation of HT MEAs at temperatures above 120°C to meet the demanding requirements of aviation fuel cells. HT-PEMFCs typically use phosphoric acid doped polybenzimidazole (PA-PBI). However, PA-PBI-based fuel cells have limited stability in the presence of water or at higher operating temperatures. In fact, they suffer from phosphoric acid loss. Recently, HT-PEMFCs based on quaternary ammonium bisphosphate Ion-Pair coordination (Ion-Pair) have shown better phosphoric acid retention in the temperature range of 80-200°C than PBI ones. In the frame of NIMPHEA project, we worked on the development of MEA based on Advent's Ion-Pair membrane technology for HT-PEMFCs. After optimizing the composition of both the cathode and anode active layers and the gas diffusion layer, we obtained a fuel cell with a nominal power density of 0.8 W/cm² at 180°C under H2/Air at 1 bar exceeding the performance of standard PBI based HT-PEMCs based MEA. This project has received funding from the Clean Hydrogen Joint Undertaking under grant agreement No 101101407. This Joint Undertaking receives support from the European Union’s Horizon Europe research and innovation program and Hydrogen Europe and Hydrogen Europe Research. The authors also thanks Advent technologies for their participation . Funded by the European Union. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union. Neither the European Union nor the granting authority can be held responsible for them. Figure 1
Read more