- Research Article
- 10.1016/j.meatsci.2025.109960
Carcass and meat quality and innovation in fresh meat industry.
- Jan 01, 2026
- Meat science
- Jørgen Kongsro + 2 more +2
Publications from 2021 to 2026
Showing 10 of 28 papers
Carcass and meat quality and innovation in fresh meat industry.
Fracture morphology and ossification process of the keel bone in modern laying hens based on radiographic imaging
Keel bone fractures (KBF) are one of the most important welfare problems in commercial laying hens. Despite extensive research on the matter, its etiology remains unclear. Studying fracture characteristics in radiographic images can aid in the understanding of the disorder. The aim of the current study was to provide detailed description of fracture characteristics and explore ossification in the keel bone. In this descriptive study, repeated cross-sectional sampling was performed in one commercial laying hen flock. The flock was visited at 11 time points from 17–57 weeks of age (WOA), radiographing 30 laying hens at each visit resulting in altogether 330 unique radiographs. Fracture characteristics and the keel bone’s level of ossification were assessed in each radiograph. In total, 344 fractures were recorded, of which 71.5% were complete and 28.5% were incomplete. Of the complete fractures, 82.9% were recorded as transverse, and 15.9% as oblique. One comminuted and two butterfly fractures were recorded. The caudal third of the keel was the most common area for fractures. Fracture characteristics differed between the different regions of the keel bone; all incomplete fractures in the cranial third appeared on the ventral surface of the keel, whilst the majority of incomplete fractures on the caudal third appeared on the dorsal surface. This indicates that the underlying etiology might differ between the cranial and caudal part. Folding fractures were observed in 18.6% of all the fractures, and occurred in both cranial-, and caudal third of the keel, indicating possible underlying disorders of calcium metabolism. All hens at 32 WOA and older had a fully ossified keel, based on radiographic evaluation. Displacement and soft tissue swelling are common characteristics in fractures of traumatic origin. We found a high frequency of simple fractures, without these characteristics, indicating that non-traumatic causes may be of higher importance than conventional beliefs.
Read moreA walk through the broiler breeder life: how do footpad dermatitis and gait scores develop from rearing to slaughter?
ABSTRACT The two most common animal-based indicators used to evaluate leg health in broiler chickens are footpad dermatitis (FPD) and gait scoring, but these indicators are less explored in broiler breeders. This study is the first to investigate FPD and gait scoring in broiler breeders during their lifespan from rearing to end of life. In total, eight flocks were monitored (four Ross and four Hubbard) at five different timepoints, in rearing (5 and 15 weeks of age), during the production period (25 and 45 weeks of age) and at the end of the production period (approximately 60 weeks of age). At each visit, 50 hens and 25 roosters were gait scored (six-point scale) and footpads from another 50 hens and 25 roosters were evaluated (five-point scale) (total n = 3000 breeders, 2000 hens and 1000 roosters). Litter quality and air quality were measured at each visit. The results showed that the overall prevalence of FPD in rearing was low and that it increased towards the end of the production, with a mean FPD score of 2 out of a maximum 4 in the hens, indicating moderate lesions and 1.5 in the roosters. In all houses, the litter was dry and loose. FPD was not related to the litter quality, but to air quality, especially the ammonia concentration (P < 0.001). Overall, the gait score were good, and increased with age in both hens (P < 0.001) and roosters of both hybrids (P < 0.001).
Read more3D model based adaptive cutting system for the meat factory cell: Overcoming natural variability
Risk categorisation of abattoirs in Europe: Current state of play
In the last decades, a risk-based approach has been identified as a step forward in modernising meat safety system in Europe. Risk categorisation of abattoirs based on their process hygiene and the appropriate use of harmonised epidemiological indicators (HEIs) has been suggested as one essential component of the risk-based meat safety assurance system. However, to date, only a limited number of papers have investigated abattoir risk categorisation. Therefore, the objectives of this study were to (i) provide an overview of the use of risk categorisation systems in poultry, pig, cattle and small ruminant abattoirs in Europe and (ii) explore the criteria, relevance and applicability of risk categorisation systems for competent authorities (CAs). To that aim, a questionnaire was designed and sent to representatives of 35 European CAs. Of the 18/35 respondents (51%), 14 (78%) indicated that abattoirs in their country are categorised according to their food safety risk in a systematic way, whilst four countries (22%) do not categorise abattoirs according to their food safety risk. The main reported purpose of categorising abattoirs is to adapt the frequency of official controls. Major differences in the described categorisation systems were found between countries, particularly in their complexity and the criteria used. The number of included criteria ranged from 1 to 10, the main ones being the outcomes of the CA's official audits (78% of the 14 countries), the size of abattoirs (64%), the relevance and credibility of HACCP plans (57%) and export agreements of abattoirs (43%). Less than a third of the surveyed countries indicated they utilise results of microbiological testing as a basis for risk categorisation of abattoirs, and no country has formally included HEIs in its risk categorisation system. The effectiveness of the implemented risk categorisation systems was assessed in five countries only (36%), but with the use of unclear methodology and assessment criteria. More than 80% of respondents expressed their wish to be provided with a practical method for categorising abattoirs according to their pertained food safety risks. In conclusion, the results of this study demonstrate the need to develop a fit-for-purpose and science-based framework for risk categorisation of abattoirs in Europe.
Read moreKeel bone fractures in broiler breeders: is palpation a reliable diagnostic method?
ABSTRACT The aim of this study was to estimate the sensitivity and specificity of palpation relative to necropsy for detection of keel bone fractures (KBF) in broiler breeders. In addition, the study investigated observer reliability of palpation. Four commercial breeder flocks (Ross 308 n = 2, Ranger Gold n = 1, Hubbard JA 757, n = 1) were included in the study. A total of 400 hens and 60 roosters were examined after culling or slaughter, at end of lay (63 weeks). Keel bones were first palpated independently by two raters with a varying degree of experience in palpation of keel bones in laying hens. After palpation, a necropsy with investigation of the keel bone was conducted. The prevalence of KBF at end of lay for hens, as diagnosed by necropsy, varied from 14-58%, while only one in 60 assessed roosters had KBF. Palpation had poor sensitivity, with differences between raters ranging from 56% to 36% when hybrid is not considered. The specificity of palpation for all hybrids together was 85% and 88%, for the two raters, respectively. The two raters had moderate agreement, Gwet’s agreement coefficient (95% confidence interval): 0.60 (0.52–0.69). In conclusion, palpation has poor diagnostic accuracy for detection of KBF in broiler breeders, and other methods, like necropsy, must be applied for reliable assessments. KBF appears to be a prevalent condition in different hybrids of broiler breeder hens, but not in roosters. RESEARCH HIGHLIGHTS This is the first study to investigate palpation as a diagnostic method for detection of KBF in broiler breeders. Palpation has poor diagnostic accuracy for detection of KBF in broiler breeder hens with differences between raters. KBF can be a prevalent problem in broiler breeder hens of several hybrids, but not in roosters.
Read moreBeyond standard PSE testing: An exploratory study of bioimpedance as a marker for ham defects
During post-mortem conversion from muscle to meat, diverse quality anomalies can emerge. Recent pork defects are often accompanied by deteriorating fibre structure. Here we investigate how bioimpedance response, an indicator of structural disintegration, can help in detecting quality defects. We, first, measured the relationship between standard meat quality variables (pHu, CIELAB, drip loss) and bioimpedance (BI) response. To screen for defect-biomarkers that are linked to aberrant bioimpedance and physicochemical indicators of quality decline, we performed LC-MS/MS proteomic analysis on samples, classified with a multivariate-based separation into good versus poor quality. We found that BI correlated significantly with, e.g., colour and drip loss. Proteomics revealed eleven proteins to be unique for either, good or poor ham quality groups, and maybe linked to structural degradation. In all, our data supports a wider integration of BI testing in pork quality testing to assess structural disintegration, which can render ham unsuitable for, e.g., costly curing.
Read moreCorrection: Grabež et al. Seaweed Inclusion in Finishing Lamb Diet Promotes Changes in Micronutrient Content and Flavour-Related Compounds of Raw Meat and Dry-Cured Leg (Fenalår). Foods 2022, 11, 1043
"Alemayehu Kidane" was not included as an author in the original publication [...].
Infrared thermography is a possible technique for estimation of parturition onset in sows
Abstract BackgroundThis study explores the possibility of using infrared thermography to estimate impending parturition in sows. Infrared devices were used to obtain the superficial body temperature from auricular skin of the sows along with rectal temperature. Three commercial piglet producing farms were included in this study. At two of the farms (1 and 2), the sows were loose housed. At the third farm (Farm 3), the sows were housed in farrowing crates. Temperature measurements from both primiparous and pluriparous sows were taken from approximately one week before the anticipated farrowing date until 24 hours postpartum. Body condition score and parity was documented from each sow. The sows’ activity levels, respiratory rates and environmental temperatures were logged along with skin temperature measurements.Results Auricular skin thermography from two different infrared devices revealed an increase in temperature starting between 16 and 8 hours before farrowing. From 16 hours ante partum to farrowing, the mean auricular skin temperature rose by 3.3 °C and 2.9°C measured with infrared camera and infrared laser thermometer, respectively. Following farrowing, the sows’ skin temperature dropped abruptly. Rectal temperature increased by only 0.4°C in the same time interval. Adjusting for differences between farms, sow activity and respiration rate, we found an average increase of the sows’ skin temperature by 2 °C or more within the last 16 hours before farrowing.ConclusionsMonitoring auricular skin temperatures of sows using infrared thermography individually one week before expected farrowing could provide a baseline temperature for each sow from which a sudden rise in temperature of approximately 2°C or more will be indicative of parturition in the following 8 h. This may lead to more efficient allocation of human assistance during farrowing time and thereby improve farrowing management and welfare of sows and their offspring.
Read moreEvaluation of RGB-D Multi-Camera Pose Estimation for 3D Reconstruction
Advances in visual sensor devices and computing power are revolutionising the interaction of robots with their environment. Cameras that capture depth information along with a common colour image play a significant role. These devices are cheap, small, and fairly precise. The information provided, particularly point clouds, can be generated in a virtual computing environment, providing complete 3D information for applications. However, off-the-shelf cameras often have a limited field of view, both on the horizontal and vertical axis. In larger environments, it is therefore often necessary to combine information from several cameras or positions. To concatenate multiple point clouds and generate the complete environment information, the pose of each camera must be known in the outer scene, i.e., they must reference a common coordinate system. To achieve this, a coordinate system must be defined, and then every device must be positioned according to this coordinate system. For cameras, a calibration can be performed to find its pose in relation to this coordinate system. Several calibration methods have been proposed to solve this challenge, ranging from structured objects such as chessboards to features in the environment. In this study, we investigate how three different pose estimation methods for multi-camera perspectives perform when reconstructing a scene in 3D. We evaluate the usage of a charuco cube, a double-sided charuco board, and a robot’s tool centre point (TCP) position in a real usage case, where precision is a key point for the system. We define a methodology to identify the points in the 3D space and measure the root-mean-square error (RMSE) based on the Euclidean distance of the actual point to a generated ground-truth point. The reconstruction carried out using the robot’s TCP position produced the best result, followed by the charuco cuboid; the double-sided angled charuco board exhibited the worst performance.
Read more