- Research Article
- 10.1016/j.ejcped.2025.100446
MONALISA – A SIOPEN pragmatic clinical trial to monitor neuroblastoma relapse with liquid biopsy sensitive analysis
- Mar 25, 2026
- EJC Paediatric Oncology
- S Taschner-Mandl + 25 more +25
Publications from 2021 to 2026
Showing 10 of 1,159 papers
MONALISA – A SIOPEN pragmatic clinical trial to monitor neuroblastoma relapse with liquid biopsy sensitive analysis
How regional spatial planning shapes suburban heat stress: Scenario-based PALM simulations around Graz, Austria
Urban climate is shaped not only by processes within city centres but also by land-use changes and development dynamics in surrounding suburban areas. High-resolution urban climate models such as the PALM model system enable the explicit representation of urban morphology and surface characteristics and are therefore well suited to investigate how urban densification and soil sealing modify local microclimatic conditions and potentially amplify urban heat island (UHI) effects. While microclimatic impacts of specific urban development projects within city borders already received wide attention in different studies, the microclimatic interrelations of large-scale suburban developments based on different scenarios still require more detailed evaluation in the research community.This contribution presents first results from the INTERFERE project, where the PALM model system is applied to investigate how business-as-usual (BAU) and future regional development pathways influence suburban climate conditions around the city of Graz (Austria) by addressing suburban growth, infrastructure expansion, and associated land-use changes. Two spatial development scenarios are examined: 1) A BAU scenario assumes continuation of current planning practices, including full utilisation of designated building land that has not yet been developed, limited targeted densification, expansion of transport infrastructure, and no reduction of existing development reserves. 2) In contrast, a climate-sensitive planning scenario (Best Practice - BP) follows similar development constraints but emphasises compact urban development and targeted densification—particularly around public transport corridors—enhanced greening measures, and reduced land take through more efficient use of existing reserves. The spatial development scenarios are derived from official zoning and regional planning instruments and are developed by a local spatial planner, who is actively involved in supra-regional and regional planning processes in Styria to ensure realistic scenarios and policy-relevant future pathways. The resulting land-use configurations are than translated into the PALM model system.The PALM simulations are driven by boundary conditions from high-resolution mesoscale modelling (WRF coupled with the Town Energy Budget model, TEB; Trimmel et al., 2021) at 300 m resolution, provided within the project. Since the mesoscale forcing explicitly accounts for urban structures and urban energy exchange processes, it provides a substantially more realistic representation than forcings from large-scale reanalyses products. For each scenario, a 30-hour heatwave episode, including a spin-up phase, is simulated based on a historical extreme summer event.By explicitly linking regional spatial planning scenarios with high-resolution microclimate modelling, this study provides new insights into how suburban development patterns influence heat exposure and thermal comfort. In a next step, the results will be discussed with local mayors and key stakeholders to identify and derive appropriate counteracting measures, which will subsequently be assessed through additional simulations. The findings, to be presented at this conference, aim to support evidence-based spatial planning and climate adaptation strategies under increasing heat stress.
Read moreWhen Healthcare heats up: Building organizational resilience of the health system to heat extremes in Austria
Extreme heat waves and high temperatures have tremendous impacts on human health and consequently the health system. Over the past years, the increasing summer heat has brought both, the population and the healthcare organisations to their limits. As care and emergency organizations are already experiencing challenging conditions during holiday season due to limited personnel resources, this situation is intensified due to rising heat that causes increased care needs and emergency operations. From a patient’s perspective, vulnerable groups, such as children, the elderly, and people with chronic and mental illnesses, are particularly affected. Symptoms can range from heat stress and cardiovascular problems to sudden death. While this places a particular burden on individual people, it also poses major challenges for health and care systems.The research projects HeatProtect1and PARAHSOHL2, aim at supporting health care organisations through identifying the most promising adaptation measures and possible digital tools. Therefore, sector specific challenges of the health system in Austria caused by extreme heat are addressed. Since heat days and tropical nights became more severe in recent decades and are continuously increasing, heat is perceived as emerging climate risk in Austria.Within the projects, meteorological, climatological and health expertise is combined through the participating organisations. Further, data from all areas are combined and assessed applying qualitative and quantitative methods to support the health sector in dealing with future heat events. Health-related heat indicators are used to quantify impacts under future global warming levels, while a regression model is applied to estimate the associated effects on hospitalizations.To identify the risks and vulnerabilities associated with heat as hazard for individual target groups, the concept of climate impact chains is used. This approach helps to identify key points where action can reduce the vulnerability of the organisations and therefore the risk of extreme heat and improve resilience in the health system. Through an interdisciplinary research approach, the projects enable bridging gaps between the complexity of climate science and the demanding day-to-day challenges of the health system. 1https://projekte.ffg.at/projekt/48475102 https://projekte.ffg.at/projekt/5125189
Read moreA beneficial fungus uses glucose concentrations to balance cellulase production and to recognize living plants, which accelerate fungal development
Fungi are among the most important degraders of dead plant materials and hence fuel the global carbon cycle. Production of the enzymes required for plant cell wall degradation is tightly regulated in fungi by environmental conditions including nutrient quality and quantity, temperature, pH and light. This sophisticated regulation indicates that the energy intensive production of enzymes is optimized to fulfil the needs of the fungus but to minimize excess and avoid feeding of so-called “exploiter-“ or “cheater-“microbes.We therefore asked how fungi sense degradable material and discriminate to root exudates or living tissue of plants to balance enzyme production with available resources. With the filamentous saprophyte Trichoderma reesei we identified two cell-surface receptors (CSG1 and CSG2), which are distinct from previously identified glucose sensors. T. reesei uses detection of a precise amount of glucose, but not other sugars released from plant materials, by these receptors as a proxy for cellulosic material to initiate translation of cellulases. Also special attachment structures formed by T. reesei on natural plant material are missing in the absence of CSG1 or CSG2. Moreover, CSG1 and CSG2 are required for colonization of plant roots and hence these receptors – as well as glucose - play an important role for fungus-plant interaction.As pheromone receptors were shown in Fusarium as important for plant sensing, we were interested in a potential crosstalk between glucose- and pheromone- sensing. Although CSG1 and CSG2 are dispensible for sexual development, fruiting body formation of T. reesei is accelerated in the presence of plant roots.We conclude that T. reesei senses extracellular glucose concentrations to discriminate between degradable plant material (liberated glucose amount correlating with enzymes secreted) and the presence of a plant (secreted glucose not correlating with enzymes secreted). Upon interaction of plant roots with T. reesei fruiting bodies, the fungus recognized also the living plant as carbon source, but did not harm growth. Hence the benefit of detecting a plant can be interpreted as one reason for accelerated sexual development by the fungus to improve its interaction with the nourishing plant.
Read moreDuality theory in linear optimization and its extensions -- formally verified
Farkas established that a system of linear inequalities has a solution if and only if we cannot obtain a contradiction by taking a linear combination of the inequalities. We state and formally prove several Farkas-like theorems over linearly ordered fields in Lean 4. Furthermore, we extend duality theory to the case when some coefficients are allowed to take "infinite values". Code: https://github.com/madvorak/duality/tree/v3.2.0
Read moreENVESOME: The Environmental Exposome and Health
Do dynamic retail energy tariffs threaten the economic viability of ECs operating under static EC-internal energy prices? — Initial insights
Molecular Engineering of Fluorinated Hybrid Gel Polymer Electrolytes Enables Ultra‐Wide‐Temperature Operation of High‐Voltage Lithium Metal Batteries
ABSTRACT The development of wide‐temperature gel polymer electrolytes (GPEs) represents a promising strategy for enhancing the extreme environment tolerance of lithium‐metal batteries (LMBs), which requires simultaneously optimizing Li + transport kinetics at low temperatures and maintaining the thermal and mechanical stability. This work addresses the intrinsic limitations of conventional GPEs by employing a molecular engineering strategy that achieves molecular‐scale hybridization of organic and inorganic units. Specifically, a fluorinated hybrid gel polymer electrolyte (FHPE) is fabricated through the in situ crosslinking polymerization of trifluoroethyl acrylate (TFEA) and acryloxypropyl polyhedral oligomeric silsesquioxane (Acry‐POSS) within 2,2‐difluoroethyl acetate (DFEA). The FHPE displays high Li + conductivity (3.54 × 10 −4 S cm −1 at −30°C), broad electrochemical stability window (>4.7 V), and remarkable mechanical strength (58.7 MPa). Moreover, the FHPE promotes the formation of LiF‐rich interphases on the LiCoO 2 cathode and lithium metal anode, thereby effectively mitigating dendrite growth and interfacial side reactions. Consequently, FHPE‐based Li/Li coin cells stably cycle for 1500 h at 0.3 mA cm −2 and −30°C, while Li/LiCoO 2 coin cells exhibit 86.7% capacity retention after 200 cycles at −30°C and 77.9% after 400 cycles at 60°C. Furthermore, Li/FHPE/LiCoO 2 pouch cells exhibit stable operation during nail penetration tests, thereby confirming their exceptional safety.
Read moreNew industrial policy between territorial assumptions and spatial practices: the case of Technum Québec
Abstract Industrial and innovation policies enshrine geographic assumptions that are usually implicit, such as a spatial hierarchy of jurisdictions, a spatialized understanding of their likely impact, and a territorial view of stakeholders. For policies to succeed, these implicit assumptions need to align across stakeholders and be compatible with spatial practices. This is particularly the case for New Industrial Policies, which seek to re-shore strategic knowledge-based industries: these policies necessarily involve development in specific regions, and involve local, national, community, private and public stakeholders. In this paper, we study Technum Québec's innovation zone initiative in Bromont. We document and analyse how tensions are emerging as the province's understanding of the geographic processes and impacts of research-led semi-conductor development is misaligned with the spatial practices of corporations, universities and research centres, and does not take full account of the effect this policy, if successful, may have on local communities.
Read moreApplying traditional and machine learning-based GWAS approaches for marker-trait identification in wheat
IntroductionComplex traits arise from polygenic and interactive genomic architectures that are difficult to resolve using traditional genome-wide association study (GWAS) approaches. Machine learning (ML) provides complementary methods capable of capturing non-linear effects, improving signal detection, and enhancing predictive accuracy of marker trait associations (MTAs).MethodsUsing a publicly available winter wheat dataset (CIMMYT), we evaluated several widely used traditional GWAS tools, including GAPIT, GCTA, GEMMA, sommer, and TASSEL, with respect to computational efficiency, model performance, and the consistency of detected associations. In parallel, ML approaches, such as Elastic Net, Extreme Gradient Boosting (XGBoost), Random Forest, and the hybrid TSLRF model, were assessed based on feature importance metrics and functional annotation of selected markers.ResultsDespite a shared reliance on mixed linear models, the traditional GWAS tools exhibited differences in runtime and showed modest but meaningful variability in the number and overlap of MTAs. ML models recovered several associations detected by traditional methods and additionally identified novel markers, potentially reflecting non-linear or epistatic effects.DiscussionOur findings demonstrate that ML can effectively complement traditional GWAS approaches for marker-trait identification in wheat. By extending beyond additive effects, ML broadens the scope of detectable genetic signals, providing a practical way to analyze complex traits and support informed marker-assisted breeding strategies.
Read more