- Research Article
1
- 10.1016/j.matlet.2025.139862
Light weight MXene Ti3C2Tx–carbon nanotube–PVDF foam with ultrahigh dielectric constant
- Mar 01, 2026
- Materials Letters
- Priyanka Arya + 2 more +2
Publications from 2021 to 2026
Showing 10 of 357 papers
Light weight MXene Ti3C2Tx–carbon nanotube–PVDF foam with ultrahigh dielectric constant
Exploring the application of various condenser microphones for wrist pulse measurement using machine learning models.
Wrist pulse measurement offers significant insights into cardiovascular health. However, the application of various sensors, such as optical, pressure, image, and ultrasonic, is limited due to issues like bright environments, incompatibility with pressure adjustments, and system complexity. Recent studies suggest condenser microphones as promising alternatives, though the optimal type among various condenser microphones remains unclear. This study explores the application of three different condenser microphones using four regression-based machine learning models (Partial Least Square Regression, Ridge Regression, Principal Component Regression, and Nu-Support Vector Regression) for wrist pulse measurement based on pulse rate accuracy. One omnidirectional condenser microphone, previously used for wrist pulse measurement, and two commonly available unidirectional condenser microphones were evaluated. A mechanical system for pulse acquisition was developed, and data were collected from 27 healthy subjects using each microphone alternatingly. Extracted time-domain and statistical features were used as inputs to compare the predicted pulse rates with the ground truth pulse rate values. Results indicated that unidirectional condenser microphones were more accurate than the omnidirectional type. Among the unidirectional microphones, the one with a sensitivity range of - 50 to - 44 dB outperformed the microphone with a sensitivity range of - 40 to - 34 dB. The Nu-Support Vector Regression model exhibited the least errors, indicating superior predictive capabilities compared to the other models. In conclusion, this study provides valuable insights into selecting appropriate condenser microphones for wrist pulse measurement, offering a guiding framework for future research in this domain.
Read moreElucidating the causal relationship between earthquake activity and avalanche occurrences
This study investigates the relationship between seismic activity and avalanche occurrences in the Western Himalayas, focusing on the Union Territory of Jammu and Kashmir, parts of Himachal Pradesh, and Uttarakhand. The region is seismically active, lying within the highest seismic zones of the Himalayas, and is prone to avalanches due to its high-altitude, steep terrain, and glacial environment. Using four decades of data (1980–2018) on avalanche occurrences and seismic events, we aimed to isolate the influence of seismic activity on avalanche triggers, excluding meteorological factors such as fresh snowfall and wind deposition. Our analysis reveals a significant correlation between seismic events and avalanche occurrences, with a marked increase in avalanches following seismic tremors, independent of snow-related factors. These findings suggest that seismic activity plays a critical role in triggering avalanches in this region. The study’s insights contribute to improved avalanche forecasting and hazard assessment in the Western Himalayas, where seismic-induced avalanches pose significant risks to life and infrastructure. Further research is recommended to refine the understanding of the influence of earthquake epicenter distance on avalanche triggers, potentially enhancing predictive capabilities and mitigation strategies.
Read moreA Novel Device for Rapid Determination of Iodine Value of Edible Oils and Fats
Waste-derived catalysts for renewable energy generation
Development of an Innovative Parallel Robot Used in Laparoscopic Pancreatic Surgery
Upcycled catalysts for environmental cleanup in water systems
Introduction to “Advances in Nanomaterials for Sensors in Early Disease Diagnosis”
Dr Anitha Devadoss, Dr Suman Singh and Dr Murugan Veerapandian introduce the Sensors & Diagnostics themed issue on Advances in Nanomaterials for Sensors in Early Disease Diagnosis.
Read moreChange in composition of blood after passing through circuit of automated device versus manual clinical method for neonatal exchange transfusions.
Automated DVET using our novel device results in fewer compositional deviations from baseline compared to conventional manual DVET, supporting its potential clinical utility. • Our research group previously developed and published a novel electromechanical device to perform double volume exchange transfusions (DVET) in neonates through the umbilical venous route. • Previous authors who had made automated devices did not analyze the composition of the blood exiting the device circuit ("post-circuit" composition), nor compared this to the conventional manual method of exchange transfusions. • In simulated DVETs performed with our device, there were significantly fewer changes in the post-circuit composition of the blood from baseline (hematological, biochemical, blood gas and osmolality values) compared to manual DVETs. • Among DVETs performed manually, 7 ml aliquots per cycle were associated with greater changes in the post-circuit composition of the blood compared to 10 ml aliquots per cycle.
Read moreDiamond machining of additively manufactured Ti6Al4V: Novel chip formation and friction-induced welding mechanism
The ultra-precision machining of additively manufactured (AM) Ti-6Al-4V presents complex interactions between the tool, material microstructure and surface integrity. This study reveals a previously unreported solid-state friction-induced welding phenomenon occurring during the machining of AM Ti-6Al-4V, which leads to redeposited debris and localised protrusions on the machined surface. Recent studies on AM of Ti6Al4V have explored deformation and failure mechanisms during laser beam powder bed fusion fabrication; however, these have primarily focused on quasi-static compression and mechanical property optimisation. The present work extends these mechanistic insights to the dynamic cutting environment, showing that interfacial friction and severe plastic deformation can trigger solid-state bonding at the tool–chip interface without any thermal phase transformation. The findings offer a new mechanistic explanation for debris accumulation and surface artefacts in precision machining of AM titanium alloys, providing pathways for improved process control and surface quality. This finding explicitly contrasts with earlier reports that attributed such deposits to carbides formed from diamond tool wear or to titanium precipitation. Our study also uncovered a novel continuous chip formation mechanism, dominated by a plastic mode of material removal interspersed with intermittent fracture sites, differing fundamentally from the adiabatic shear-induced saw-tooth chips reported for cast Ti6Al4V. These mechanism-level insights align with recent advances in machining difficult-to-cut and anisotropic materials but extend them by establishing direct evidence of debris welding in AM Ti6Al4V. This work reframes the challenges of precision surface generation in diamond machining and highlights the need for alternative strategies to suppress friction-induced welding for optical-grade finishes.
Read more