- Research Article
3
- 10.1016/j.radmeas.2024.107329
Monte Carlo dosimetry for a EURADOS WG 10 and RENEB field test of retrospective dosimetry techniques in realistic exposure scenarios
- Nov 09, 2024
- Radiation Measurements
- Hyoungtaek Kim + 14 more +14
Publications from 2021 to 2026
Showing 10 of 127 papers
Monte Carlo dosimetry for a EURADOS WG 10 and RENEB field test of retrospective dosimetry techniques in realistic exposure scenarios
EURADOS Working Group 6, Computational Dosimetry, a history of promoting good practice via intercomparisons and training
This paper is the editorial of a special issue of Radiation Measurements on EURADOS intercomparisons in computational dosimetry. The articles in this special issue cover complex problems in terms of geometry, particle types, energy ranges, coupled calculations and also scale, with the possibility of performing Monte Carlo calculations on micro and nano dosimetric scales now feasible. A summary of the exercises is provided in the first article of the Special Issue, which presents the findings and common conclusions from the ten articles reporting the results of the different exercises. One of these issues was the correct assessment of bone marrow dose, which prompted the inclusion of an article in this special issue explaining the ICRP-recommended method for bone marrow dosimetry.
Read moreUse of Twenty Years CLUSTER/FGM Data to Observe the Mean Behavior of the Magnetic Field and Current Density of Earth's Magnetosphere
Abstract The data from the CLUSTER FGM magnetometer, recorded for 20 years at ESA's Cluster Science Archive, as well as the position of the spacecraft, have been used to form a database aligned in time. It allows the calculation of curl(B) over all the lifetime of the mission (representing the current density via ). The and data are then bin averaged, as a function of the dipole tilt angle, to form a 3D grid of spatial extent of about 20 RE, and for any spatial resolution. From these data grids, maps of the direction of the magnetic field and of the current density can be produced, allowing the observation of the average behavior of the magnetic field and the current density on a large scale. The validity of the calculation of is discussed. By means of spatial interpolation, the grids are used to provide a measurement of the magnetic field at any point in space where the grid is filled. This allows the possibility of ray tracing to obtain empirical plots of the magnetic field lines, that is, modeled from experimental data. Field lines near the cusp can be visualized, although smoothed by the averaging of the IMF and solar wind parameters. In future work it would be possible to add other classification criteria than just the dipole tilt angle, such as various activity indices and solar wind parameters. The prospect of adding data from other missions (such as MMS?) would extend the regions that have been covered by Cluster, and increase the spatial extent of the 3D grid and its resolution.
Read moreIsolation and endemism in subterranean aquatic snails: unexpected case of Montenegrospeum bogici (Pe\u0161i\u0107 et Gl\xf6er, 2012) (Gastropoda: Truncatelloidea: Hydrobiidae)
The subterranean aquatic snails may serve as a model of endemism and isolation vs. migration in subterranean habitats. The aim of the present paper is to verify the hypothesis that subterranean aquatic snails can migrate through diverse subterranean habitats, applying four molecular markers as well as a RAPD technique and shell morphometry. They were used to estimate the differences and gene flow between populations of the hydrobiid subterranean aquatic species Montenegrospeum bogici, collected in the Dinaric karst region. Three molecularly distinct taxonomic units were distinguished. The mOTU B was found at single locality, mOTU C at two, but the mOTU A at ten localities, scattered along 236 km distance, at two of them in sympatry with either mOTU B or C. Within mOTU A, the estimated levels of the gene flow were high. The pairwise measures of genetic differentiation were statistically significantly associated with geographic distances between the populations. In general, neither the infinite-island model of interpopulation differentiation, expected for isolated populations, nor the stepping-stone one, but rather the isolation-by-distance model explained the observed pattern. Our results suggest that interstitial habitats provide ways of migration for the stygobiont M. bogici, as has been already suggested for other subterranean gastropods.
Read moreExploring Accelerators for Intense Beams with the IBEX Paul Trap
Accelerators built from linear components will exhibit bounded and stable particle motion in the ideal case. However, any imperfections in field strength or misalignment of components can introduce chaotic and unstable particle motion. All accelerators are prone to such non-linearities but the effects are even more significant in high intensity particle beams with the presence of space charge effects. This work aims to explore the non-linearities which arise in high intensity particle beams using the scaled experiment, IBEX. The IBEX experiment is a linear Paul trap that allows the transverse dynamics of a collection of trapped particles to be studied by mimicking the propagation through multiple quadrupole lattice periods whilst remaining stationary in the laboratory frame. IBEX is currently undergoing a non-linear upgrade with the goal of investigating Non-linear Integrable Optics (NIO) in order to improve our understanding and utilisation of high intensity particle beams.
Read moreMuon Ionization Cooling Experiment: Results & Prospects
A high-energy muon collider could be the most powerful and cost-effective collider approach in the multi-TeV regime, and a neutrino source based on decay of an intense muon beam would be ideal for measurement of neutrino oscillation parameters. Muon beams may be created through the decay of pions produced in the interaction of a proton beam with a target. The muons are subsequently accelerated and injected into a storage ring where they decay producing a beam of neutrinos, or collide with counter-rotating antimuons. Cooling of the muon beam would enable more muons to be accelerated resulting in a more intense neutrino source and higher collider luminosity. Ionization cooling is the novel technique by which it is proposed to cool the beam. The Muon Ionization Cooling Experiment collaboration constructed a section of an ionization cooling channel and used it to provide the first demonstration of ionization cooling. Here the observation of ionization cooling is described. The cooling performance is studied for a variety of beam and magnetic field configurations. The outlook for muon ionization cooling demonstrations is discussed.
Read moreTesting Tools for the IBEX Control System
At the ISIS Neutron and Muon Source, we are in the process of upgrading from the LabVIEW-based SECI instrument control system to the new IBEX control system* based on EPICS**. It is crucial to the running of experiments that IBEX has a high uptime and few bugs. However, it is often not possible to test the system live on an instrument prior to an experiment and thus we must be sure that it is ready to go as soon as we have users. To test that we are correctly communicating with hardware we have built a framework to automate testing of EPICS IOCs using device emulators created using the LeWIS*** Python package. This lets us test that new drivers are functionally the same as those under SECI. To ensure that the full instrument control system stack is working as intended we are also using the Squish testing tool****. Whilst this is used by industry as a GUI focused tool we have used it in conjugation with a fully simulated IBEX installation to create system tests, letting us directly simulate the interactions a user has with IBEX and validate its behavior. This poster will present how using these tools has made IBEX a more robust system.
Read moreProgress on Design Studies for the ISIS II Upgrade
ISIS, the spallation neutron source at the Rutherford Appleton Laboratory in the UK, uses a 50 Hz, 800 MeV proton RCS to provide a beam power of 0.2 MW, delivered in 0.4 us long pulses. Detailed studies are now under way for a major upgrade. Accelerator designs using FFAs, conventional accumulator and synchrotron rings are being considered for the required MW beam power. This paper summarises the scope of the different research incorporating results from recent target studies and user consultations. Preliminary results for Fixed Field Alternating gradient (FFA) rings and conventional rings located in the existing ISIS synchrotron hall are presented.
Read moreUpgrading the Synchronisation and Trigger Systems on the Vulcan High-Power Nd:glass Laser
The Vulcan Neodymium-Glass High-Power Laser Facility at the Central Laser Facility in the UK has been operational for over 40 years providing a world-leading and high-profile service to International researchers in the field of Plasma Physics. Over that time the Facility has had many modifications and enhancements to the buildings, the laser hardware and to the computerised control, synchronisation and timing systems. As the laser systems have developed and the user experiments have continued to become much more complex and demanding, many new operational conditions have been required. The use of four independent laser oscillators with different properties - including temporal, spectral and operating frequencies - have meant that the optical and electrical multiplexing and the timing and synchronisation systems have all had to be adapted and extended to cope with these additional needs. However, these changes have resulted in the build-up of the overall system jitter to ± 250 ps between long (ns) and short (ps) optical pulses and this is a limiting factor for time-critical experiments. This paper will present some of the key changes and improvements that have recently been made.
Read moreFixed Field Accelerators and Space Charge Modeling
The efforts of the Fixed Field Accelerators FFA (formerly known as FFAG accelerators) community to address the high intensity challenge are reviewed. Starting from analytic estimates and linear models for space charge computation, the current possibilities of precise 3D models for start to end modeling are discussed.
Read more