- Research Article
- 10.1016/j.engfracmech.2026.111949
Microcrack evolution and damage mechanisms of natural ice under ductile compressive strain revealed by acoustic emission
- Apr 01, 2026
- Engineering Fracture Mechanics
- Qingkai Wang + 7 more +7
Publications from 2021 to 2026
Showing 10 of 1,606 papers
Microcrack evolution and damage mechanisms of natural ice under ductile compressive strain revealed by acoustic emission
Results and insights from the first ACTRIS intercomparison workshop on sub-10 nm aerosol sizing instrumentation
Abstract. Sub-10 nm aerosol particles play a critical role in the atmosphere through their involvement in new particle formation, a key process influencing the availability of cloud condensation nuclei. In recognition of their significance, international observation frameworks such as the Aerosol, Clouds and Trace Gases Research Infrastructure (ACTRIS) engage in the process of integrating their observations into standardized protocols. ACTRIS aims to enhance the understanding of atmospheric processes, including those related to particle dynamics and their interactions with clouds and climate through harmonized long-term observations. To evaluate the performance of current instrumentation for sub-10 nm particle measurements, as well as the procedures for doing so, in November 2023, the ACTRIS Cluster Calibration Center in Helsinki, Finland, held its first workshop on the intercomparison of instrumentation for sub-10 nm aerosol particle number size distribution measurements. In this workshop, three mobility-based systems (GRIMM PSMPS, TSI 1 nm SMPS and TSI 3938N56) and five activation-based systems (three Airmodus A11s and two Airmodus A12s) were evaluated. The focus lay on assessing their number concentration response and size-dependent detection efficiency – including the determination of the diameter with 50 % detection efficiency – and sizing accuracy. In addition to these parameters, the instruments were compared with each other while measuring aerosol particle number size distributions side by side from an aerosol chamber. Beyond the evaluation of instrument performance, the workshop aimed to test and assess calibration and comparison methods to identify aspects of ACTRIS compliance requiring further refinement. Although this work highlights the key strengths of the different measurement techniques and instruments, several challenges remain. Mobility-based systems showed high sizing accuracy, especially for particles larger than 2 nm, while encountering challenges in measuring particles in the lower atmospheric concentration range. Activation-based systems proved more sensitive at lower particle number concentrations and particle sizes, with the drawback of slight unit-to-unit variability. Additionally, a systematic size shift was identified in aerosols generated by 4-way-cross glowing wire generator setups, indicating a need for further investigation on this effect and the development of calibration equipment in the sub-10 nm size range.
Read moreUsing uncrewed aerial systems at the sub-arctic site Pallas to study aerosol–cloud interactions
Low-level clouds play a crucial role in the Arctic climate system, for example by contributing to surface warming. Although many efforts have been made to investigate low-level clouds, there is still a significant in-situ data gap within the atmospheric boundary layer (ABL) and the lower troposphere. While long-term ground-based observatories provide valuable continuous measurements, they cannot resolve the vertical structure of aerosols and clouds.To address this data gap, five uncrewed aerial systems (UAS) were deployed during two intensive measurement campaigns at the Pallas Atmosphere-Ecosystem Supersite in northern Finland in spring (4–12 April 2025) and autumn (16–30 September 2025). Fixed-wing, vertical take-off and landing (VTOL), and multirotor platforms were operated jointly by the Finnish Meteorological Institute (FMI) and the Technische Universität Braunschweig. In total, 246 measurement flights were conducted, reaching altitudes of up to 2 km above ground level and conducting over 80 hours of in-situ sampling.The UAS were equipped with different sensors to measure aerosols, including two condensation particle counters with different cut-offs to measure the aerosol particle number concentration, a Partector 2 Pro to measure the size distribution between 10 and 300 nm and a POPS to measure the size distribution between 115 and 3370 nm. In addition meteorological parameters, and cloud droplet properties were also measured. This enables a detailed characterization of the vertical distribution of aerosols and their interaction with the ABL and low-level clouds. These measurements were compared to long-term observations from the nearby ground-based observatory Sammaltunturi. This study demonstrates the value of combining ground-based measurements with UAS profiling when investigating aerosol-cloud interactions.Preliminary results indicate pronounced seasonal differences. Spring conditions were dominated by new particle formation events associated with long-range air mass transport from the central Arctic. In contrast, autumn measurements were strongly influenced by low-level cloud formation and local aerosol sources. Overall, this campaign demonstrates the added value of UAS observations in improving the understanding of aerosol-cloud interactions in the sub-Arctic and enhancing the interpretability of existing ground-based datasets.
Read moreExploring the Potential of long-term Aerosol Size Distribution Measurements as Proxies for Cloud Condensation Nuclei in Welgegund, South Africa
Cloud condensation nuclei (CCN) play a central role in regulating cloud microphysical properties and, consequently, aerosol-cloud interactions, which are the largest source of uncertainty of radiative forcing (RF) in global climate models. For an aerosol to be able to act as CCN at certain atmospheric conditions, high enough aerosol hygroscopicity (κ) and particle size (dp) are required. These properties can be directly characterized using cloud condensation nuclei counters (CCNc) and, when measured over extended periods, provide valuable constraints for the representation of aerosol–cloud interactions in climate models. However, long-term CCN observations remain sparse in the Southern Hemisphere, limiting the ability to evaluate and improve model performance using observational constraints. In this study we focus on measurements from the atmospheric measurement station in Welgegund, South Africa. The station is strategically located to capture air masses influenced by pristine grassland background as well as major anthropogenic source regions. The site is situated approximately 100 km southwest of the Johannesburg–Pretoria conurbation at approximately 1480 m above mean sea level. The coexistence of pristine and polluted air mass influences provides an opportunity to compare the CCN-activity of natural and anthropogenic aerosol in southern Africa, where other measurement stations are sparce. The aim is to evaluate the potential of using long-term measurements of particle number size distributions (PNSD) produced since 2010 at Welgegund station as a proxy for CCN concentrations. This is done by utilizing an unpublished dataset from a measurement campaign with a CCNc counter during January 2017-April 2017. The analysis will evaluate the commonly used approximation of particles larger than 100 nm as a proxy for CCN during the campaign and then utilize this information to the 15-year PNSD data set. Applicable conditions are first determined by analyzing the characteristics of CCN (κ, critical diameter at given supersaturations dcrit), potential diurnal cycle of CCN concentrations, the correlation to other relevant meteorological parameters and sources of the air masses during the campaign. In the future, the presented dataset is expected to contribute to the development of a standardized long-term CCN observational framework to support the integration of southern African measurements into global CCN databases. Thereby helping to address the current geographical imbalance of observations, that can be used to reduce climate model RF-uncertainty associated with aerosol–cloud interactions.
Read moreBridging mesoscale ocean dynamics and large-scale climate in 1° models
Climate models are commonly run at resolutions too coarse to resolve mesoscale ocean dynamics, and therefore lack oceanic eddies and fronts that strongly influence air-sea exchange. This leads to an underestimation of the ocean’s role in driving atmosphere–ocean interactions in western boundary current regions, with implications for simulated climate variability and change. We explore whether the effects of mesoscale sea surface temperature (SST) features on large-scale circulation can be represented in a standard resolution climate model using a partially coupled “pacemaker” configuration of the Norwegian Earth System Model version 2 (NorESM2). The setup introduces mesoscale SST features from a high-resolution (0.125°) ocean into the standard-resolution coupled model grid (1° ocean and atmosphere). Focusing on the Kuroshio Current, we find that mesoscale SST features amplify ocean-to-atmosphere turbulent heat fluxes, as expected, and also produce notable free tropospheric responses (a robust local strengthening of the North Pacific storm track at low levels and a poleward shift aloft). The results offer a proof of concept that 1° climate models can capture the broader climate impacts of small-scale oceanic variability without explicitly resolving it, opening promising pathways to improve predictions and projections.
Read moreUsing atmospheric inverse model CIF-FLEXPART to estimate the capability to monitor CO2 and CH4 emission changes in Finland
In our changing climate and the green transition movement, it is important to verify national greenhouse gas emission inventories. By using prior emission estimates from inventories and process models as well as atmospheric greenhouse gas observations, we are able to assess emissions and their changes from different sources with inversion modeling. However, the scarcity of measuring stations affect the uncertainty of the inversion models.In this study, we assess our ability to monitor the green transition in Finland. Currently atmospheric greenhouse gas concentrations are measured in 6 locations in Finland. Including new observation towers would fill existing gaps in the observation network. We aim to see how new atmospheric concentration measurement towers with different sensor accuracies could improve greenhouse gas detection in the area. We carry out an observing system simulation experiment (OSSE), using sensitivity tests with the Community Inversion Framework (CIF) using the transport model FLEXPART with a 0.1º x 0.1º spatial resolution on a nested domain, and observing how the model reacts to changes in the prior emissions and synthetic observations.Addition of new stations in Finland could improve greenhouse gas detection and emission inventory assessment, and using lower accuracy sensors could help improve detection with a lower cost. Development of the OSSE experiment is still in progress and emissions from different source sectors, like wetlands and anthropogenic emissions will be optimized for multiple years. Our final inversion products will give improved estimates of inversion model sensitivity and show how effective a new observing system in Finland will be at detecting emissions.
Read moreFire-driven shifts in nitrous oxide emissions in boreal peatland soils
In parts of the northern boreal zone, a significant number of peatlands have previously been drained for forestry. Climate change is increasing the frequency of forest fires, making these peatland forests particularly vulnerable to wildfires due to thick organic layers and low water table levels. Peatlands store approximately 10% of global soil nitrogen (N) and peatland forests in particular may act as a source of nitrous oxide (N2O), which is a potent greenhouse gas contributing to ozone depletion. Although forest fires affect several factors influencing soil N dynamics, very little is known about the impact of wildfires on the N cycle and N2O emissions on burned peatland sites. We investigated these impacts with a peat column experiment by simulating forest fire conditions with controlled burning. We collected peat profiles up to 50 cm depth from three different undrained and drained peatland sites in Southern Finland in May 2025 (n=50). Peat columns were incubated outdoors for three months, and half of the columns were scorched in mid-summer with a gas torch to simulate a surface fire. During the experiment period, N2O, carbon dioxide (CO2), and methane (CH4) were measured weekly. After three months, incubated columns were dissected, and peat samples were collected to analyze soil physicochemical parameters, microbial community structure, and the quality of soil organic matter. Preliminary results suggest that nutrient-rich peatland forests act as N2O sources under favorable conditions for N2O production, while nutrient-poor sites are negligible as N2O sources. The fire appeared to shift these patterns and temporarily increase N2O emissions across peatland types. Further analyses will evaluate how post-fire changes in different peat N pools relate to observed N₂O flux dynamics.
Read moreInsights into long-term Atmospheric Profiling with the Vaisala CL61 Ceilometer
The Vaisala CL61 is increasingly deployed in both research infrastructures, such as ACTRIS, and operational meteorological networks for applications including aviation and air-quality forecasting. As a new generation elastic backscatter lidar, it extends conventional ceilometer capabilities by providing depolarization ratio measurement. While this measurement is highly valuable, especially for unattended, autonomous operation, its use in network applications requires careful characterization.We developed a methodology for identifying background signals and suitable liquid cloud layers to evaluate the long-term performance of multiple CL61 instruments across different sites. Results show some variability between instruments, with several of these early production units exhibiting a pronounced decrease in laser power over time, accompanied by increased background noise. Although internal calibration normally compensates for laser power degradation, external atmospheric calibration at the Lindenberg site revealed that this compensation becomes insufficient when laser power falls below 40%.Termination hood measurements were used to characterize instrument noise and bias profiles. Both were found to exhibit temperature dependence and to deviate from zero in the near range, below approximately 2 km but extending up to 5 km for one instrument. A method for bias correction, along with an estimation of the associated uncertainty, is presented. In addition, an aerosol inversion approach is also introduced for retrieving the profile of aerosol particle backscatter coefficient, aerosol depolarization ratio, and their corresponding uncertainties. A case study demonstrates that bias-corrected, aerosol-inverted depolarization ratio can differ by up to 0.1 from the original instrument values, emphasizing the importance of accounting for instrumental bias and, in particular, molecular contributions at the CL61 operating wavelength of 905 nm.Lastly, we observed signal loss in one instrument and found that it was due to optical lens fogging caused by insufficient internal heating linked to firmware behaviour. It is particularly important to identify and exclude such periods to ensure the reliability of the measurement.
Read moreImprovements to 6D Grid Optimisation in Vlasiator
Vlasiator is a global hybrid-Vlasov space plasma simulation, modeling the velocity distribution of ions in a large region of near-Earth space. Due to the high memory and computation demands of the kinetic method as well as the large physical scale, optimisations are required to make simulation feasible. This presentation explores optimisations used in the spatial and velocity grids.We first consider the spatial dimension. For this, Vlasiator utilises cell-based octree adaptive mesh refinement (AMR). Essentially, each spatial cell may be split in all three spatial dimensions to create eight smaller children in order to improve simulation accuracy in relevant regions. This can be repeated if necessary, with runs typically using four levels of refinement. Refinement may be done statically at the start of the simulation, or dynamically based on the plasma parameters.Vlasiator uses a combination of several parameters for dynamic runtime refinement. These include scaled gradients of macroscopic variables to detect steep changes, the ratio of the current density to perpendicular magnetic field for current sheets and reconnection, as well as pressure anisotropy and vorticity for foreshock refinement.For the velocity grid we use a somewhat similar method of stretching. In order to simplify translation, the velocity grid is static and identical in each spatial cell. To eliminate splitting of acceleration pencils, the size of cells in each coordinate direction is a function of that coordinate. Thus if we consider a grid with higher resolution around some point, the grid appears stretched along the coordinate axes when moving away from that point. The main purpose of the stretched grid is to enable modeling of colder distributions requiring a higher resolution without increasing resolution for the entire velocity grid.Combining these optimisations enables simulation on modern supercomputers with scale and resolution which would be unfeasible without them. This is achieved by limiting resources expended on regions where they are less critical for simulation accuracy and the scientific focus of a given run, while allowing higher fidelity in more important regions. These methods are applicable to other kinetic simulations, as well as grid-based simulations in general.
Read moreAn assessment of the stratospheric temperature response to volcanic sulfate injections from recent Model Intercomparison Projects
Some major volcanic eruptions, such as the one of Mt. Pinatubo in 1991, can inject large amounts of sulfur dioxide (SO2) into the stratosphere, leading to the formation of a volcanic aerosol cloud. This dense aerosol cloud induces radiative heating of the stratosphere, causing ozone and water vapour changes, thereby altering middle atmospheric dynamics and chemistry. The scale of these impacts on stratospheric temperature anomalies is still highly uncertain.In this study we analyse data from the Historical Eruptions SO2 Emission Assessment Protocol (HErSEA) under the Interactive Stratospheric Aerosol Model Intercomparison Project (ISA-MIP). The results from eight global interactive-aerosol models confirm our general understanding of the stratospheric aerosol forcing due to SO2 injection following a volcanic eruption. As direct observations are sparse we compare models to three widely used reanalyses (ERA5, MERRA2, and JRA55). This analysis shows that while the multi-model mean temperature anomalies agree well with reanalyses, differences among individual models can be large. Our study shows that agreement in the median occurs through error compensation when averaging across models. The analysis and the sensitivity tests for model selection presented here highlight that by far the most important factor driving both magnitude and spread of the multi-model distribution in temperature response to volcanic aerosol forcing is model choice. Differences in transport, radiative transfer, and microphysics as well as the characterization of aerosol size distributions play a crucial role for the simulated spread in the temperature response.Another candidate to explain the spread in the ISA-MIP models, is the use of interactive aerosol schemes. To test this hypothesis, we compared the ISA-MIP multi-model distribution with those obtained from CCMI-2022 and CMIP6-AMIP model intercomparisons, which use prescribed SADs. If indeed interactive aerosol treatment would be a key contributor, one would expect smaller multi-model temperature anomaly distributions from CCMI-2022 and CMIP6-AMIP. Interestingly, this hypothesis has to be rejected, as no reduction in the multi-model spread is found. Hence, we argue for caution in attribution studies and the interpretation of stratospheric aerosol injection experiments relying on individual or few models.
Read more