- Research Article
- 10.1182/blood-2025-8199
Estimating incident and prevalent essential thrombocythemia patients eligible for cytoreductive therapies in the US and Canada
- Nov 03, 2025
- Blood
- Paul Walden + 3 more +3
Publications from 2021 to 2026
Showing 10 of 13 papers
Estimating incident and prevalent essential thrombocythemia patients eligible for cytoreductive therapies in the US and Canada
Real-world hematologic response and treatment patterns among patients with polycythemia vera (PV) treated with ropeginterferon alfa-2b (ropeg)
A Practical Guide to Building, Evaluating and Refining a Multi-Sector Community-Based Integrated Care Model for Seniors
Background: Integrated care models that bring together health and social care services in the communities where people live are necessary to meet people’s needs in an effective, person-centred, and sustainable manner. However, designing, implementing, and evaluating these models remain challenging particularly given the complexity of need, services, and partnerships. Objectives: Over the last three years, we utilized a learning health system approach to design, implement, evaluate, and revisit our integrated care model that aims to integrate health and social care for seniors, with a focus on those facing socioeconomic or other challenges. The Community Wellness Hub is an alliance of health and social service providers that coordinate and deliver services to seniors. The Hub is located in affordable housing buildings and provides services to individuals who reside in the building and surrounding area. The aim is to enable members to lead healthy and fulfilling lives in the community by proactively addressing health and wellness needs and reducing health crises requiring acute care. Services provided are an intersection of three systems: health care, housing, and social care, spanning 15 organizations. In this workshop, we share the journey of the Community Wellness Hub from inception to date. We will reflect on facilitators, challenges, and learnings in three main areas: building and implementing the hub, evaluating the implementation, and enacting the results of the evaluation. Proposed Audience: Proposed participants include policy makers, program designers, evaluators, quality improvement specialists, patients, and caregivers as well as researchers interested in designing and evaluating complex integrated care initiatives. Structure: •The first 5-10 minutes of the workshop will be a round table introduction •Then 5 minutes for introducing the Community Wellness Hub and the agenda of the workshop to the participants •The last 10 minutes will be for summarizing the lessons learned and take-home messages. Similarities and variations amongst jurisdictions will be reflected on based on the participants •Then the rest of the time will be divided into three equal parts. The first will cover the creation of the hub, then the evaluation and finally enacting of the evaluation results into actionable steps. Each of the three sections will start by an open question inviting the audience to work in small groups to answer this question. These questions are: what are the key elements when creating a hub model via a partnership that spans health, social and community care? How to evaluate the implementation of an integrated hub model? How to enact the evaluation results? •After each group discussion, we will connect to reflect on the various approaches. Following that the presenters will share the approach they used within the hub highlighting resources, methods, tools, and practical tips. Outcome: By the end of the workshop, participants are expected to have learned some practical tips around designing, implementing, evaluating and utilizing the evaluation results in the context of integrating health and social care that may be applied to their local programs or initiatives.
Read moreStudy on the Sealing and Inactivation Mechanics of Titanium Alloy Tube Flareless Internal Rolling Connection
The finite element model of the internal rolling connection process for Titanium alloy tubes was established. The distribution of the elastic strain and the contact force were analyzed to reveal the sealing mechanics of the flareless union. The residual compressive stress was generated between the tube and sleeve, which made the tube and sleeve contact closely. Through the microscopic view analysis of the connection interface between the tube and sleeve before and after vibration test, the vibration fatigue inactivation mechanism was disclosed. In the action of circulate vibration load, fretting wear generated between the tube and sleeve, which broke the original contact state. Then the tube and sleeve can't connect closely and the joint became inactivate.
Read moreComparative analysis of the experimental and numerical research of the stamping process of axially-symmetrical elements
The paper presents experimental and numerical results of the stamping process of an axially-symmetrical element. The subject of the study was a sample made of a 0.47 mm thick aluminium alloy Al-1100 sheet. Experimental studies were conducted on a universal testing machine, while numerical simulations were carried out on two different numerical software programs Abaqus and Deform-3D. The results obtained from the numerical analysis allowed to develop a numerical model of the stamping process.
Read moreEffect of Temperature and Cooling Rate on the Microstructures of 35MnB and 25Mn Tubes during Heat Treatment
Band structures with pearlite and ferrite aligned as stripes can be created during the heat treatment of carbon steel. Since band structures undermine the mechanical quality of end products, it is highly important to select a process condition that will not create band structures as a result of heat treatment. This study verified the effect of temperature and cooling rate on the creation of band structures during heat treatment of 35MnB and 25Mn steel tubes for drive shafts and also considered the optimal process conditions to remove band structures or prevent their creation. The experimental results suggest that, during heat treatment of 35MnB and 25Mn steel tubes, it is most effective to ensure a cooling rate faster than furnace cooling in order to prevent band structures.
Read moreExperimental feasibility of multistatic holography for breast microwave radar image reconstruction.
The goal of this study was to assess the experimental feasibility of circular multistatic holography, a novel breast microwave radar reconstruction approach, using experimental datasets recorded using a preclinical experimental setup. The performance of this approach was quantitatively evaluated by calculating the signal to clutter ratio (SCR), contrast to clutter ratio (CCR), tumor to fibroglandular response ratio (TFRR), spatial accuracy, and reconstruction time. Five datasets were recorded using synthetic phantoms with the dielectric properties of breast tissue in the 1-6 GHz range using a custom radar system developed by the authors. The datasets contained synthetic structures that mimic the dielectric properties of fibroglandular breast tissues. Four of these datasets the authors covered an 8 mm inclusion that emulated a tumor. A custom microwave radar system developed at the University of Manitoba was used to record the radar responses from the phantoms. The datasets were reconstructed using the proposed multistatic approach as well as with a monostatic holography approach that has been previously shown to yield the images with the highest contrast and focal quality. For all reconstructions, the location of the synthetic tumors in the experimental setup was consistent with the position in the both the monostatic and multistatic reconstructed images. The average spatial error was less than 4 mm, which is half the spatial resolution of the data acquisition system. The average SCR, CCR, and TFRR of the images reconstructed with the multistatic approach were 15.0, 9.4, and 10.0 dB, respectively. In comparison, monostatic images obtained using the datasets from the same experimental setups yielded average SCR, CCR, and TFRR values of 12.8, 4.9, and 5.9 dB. No artifacts, defined as responses generated by the reconstruction method of at least half the energy of the tumor signatures, were noted in the multistatic reconstructions. The average execution time of the images formed using the proposed approach was 4 s, which is one order of magnitude faster than the current state-of-the-art time-domain multistatic breast microwave radar reconstruction algorithms. The images generated by the proposed method show that multistatic holography is capable of forming spatially accurate images in real-time with signal to clutter levels and contrast values higher than other published monostatic and multistatic cylindrical radar reconstruction approaches. In comparison to the monostatic holographic approach, the images generated by the proposed multistatic approach had SCR values that were at least 50% higher. The multistatic images had CCR and TFRR values at least 200% greater than those formed using a monostatic approach.
Read moreInnovative Flexible Metal Forming Processes based on Hybrid Thermo‐Mechanical Interaction
A new approach towards functional gradation of structural parts is presented. This approach is based on the utilization of locally varying thermo‐mechanically coupled effects applied to different initial workpiece geometries. The possible degree of freedom for the gradation of material properties and geometrical shape for sheet metal forming applications as well as for parts produced by bulk metal forming is characterized by the results of metallographic investigations, by mechanical testing and by an indication of the remaining residual stress state. On the basis of experimental results and process simulations, it could be revealed that the ability to exactly control the dynamic microstructural evolution by thermal and mechanical process parameters combined with predefined material design parameters constitutes a key towards the adjustment of flexible material property profiles even for parts with complex three‐dimensional geometry. Beyond that, the integrative aspect of thermal and mechanical treatment already implies the high level of obtainable efficiency resulting from shortening of process chains. However, it is not only the ability to integrate shape generation and property gradation, but also the automatically included positive effect of tailoring process behaviour by a gradation of formability finally allowing to improve process efficiency e.g. by a reduction of forming steps or reduction of (local) tool load.
Read moreReliable Serial Backplane Data Transmission at 10 Gb/s
ABSTRACT This paper will demonstrate how reliable data communications through a backplane at 10 Gbps can be achieved today through a combination of good design practices plus available connector and active equalization technologies. A brief description of interconnect issues and how they affect the channel is given. It will be demonstrated a well-designed channel can be readily corrected by simple, robust active equalization techniques at the receiving end. Experimental results are given to illustrate the channel issues and how they impact overall performance. The results illustrate that 10 Gbps performance is consistently achievable over FR-4 backplane traces. This paper was originally presented at the IEC DesignCon 2002. Please see www.iec.org .
Read moreStochastic Multiproduct Inventory Models with Limited Storage
This paper studies multiproduct inventory models with stochastic demands and a warehousing constraint. Finite horizon as well as stationary and nonstationary discounted-cost infinite-horizon problems are addressed. Existence of optimal feedback policies is established under fairly general assumptions. Furthermore, the structure of the optimal policies is analyzed when the ordering cost is linear and the inventory/backlog cost is convex. The optimal policies generalize the base-stock policies in the single-product case. Finally, in the stationary infinite-horizon case, a myopic policy is proved to be optimal if the product demands are independent and the cost functions are separable.
Read more